Your cart is empty.
Your cart is empty.A ducting cone designed for adapting ductwork to equipment like bathroom fans and dust collectors.
M J W 01
2025-09-06 15:10:09
Excellent, heavy gauge reducer. Better then expected
jcor
2025-08-29 12:31:18
Extremely tight fit however once fitted very solid piece no complaints
J W R
2025-08-17 14:08:05
Used a mod for my kamado grill. Like the high gloss finish.
Winston Chiu
2025-07-16 20:53:28
This reducer was build solidly. however the opening won't snuggly fit into a 6" pipe as it is exactly the same size. It should have either a slightly larger or smaller diameter in order to slide into the 6" pipe.
Brian Borkin
2025-07-05 17:46:16
I used this to install a bath fan and use the existing duct work so I didn't have to run new ducting. It worked great, was sturdy, and fit both sides as it should for each size.
Ronen
2025-06-15 20:53:05
Bought this as one of the components to build a DIY bat signal, and this adapter connected well to a larger 10"-12" HVAC adapter
Kevin
2025-04-09 21:25:31
This item is advertised for use with rigid ducts, but it will only work for flexible ducts. The advertised pictures show the dimensions to be 8" on one end and 6" on the other end. Yes, we get that it is being advertised as a 6" to 8" adapter, and if it were actually 6" on one end and 8" on the other that would be perfect. The actual dimensions; however, are 5 5/8" to 7 3/4". This is too small to mate with rigid galvanized ducts. I'm having to return immediately on receipt and now my project is behind.
Michael W.
2025-04-01 10:58:48
Did the job just what I needed won’t have to replace again in my life time. I hope Thank for asking
Bert
2025-02-04 14:10:35
Could not find one in the hardware stores. Was able to find one here Amazon is great to find all that you need and don’t need It was good quality no issues
Tony B.
2025-01-08 13:19:50
Fit perfectly, used it for fixing a upright airConditioner
Ishan
2024-12-24 17:46:18
I purchased this 10" to 6" Air Duct Reducer and, overall, it got the job done. When it arrived, a few sections were slightly bent, so I had to straighten them out before installation. It also wasn’t a perfect fit, so my installer had to seal some gaps with foil tape to ensure there were no air leaks.Despite these minor issues, once everything was in place, the reducer functioned as intended. If you’re facing the same need to reduce from a 10" duct to a 6" duct, this product can certainly work—just be prepared to do a bit of tweaking and sealing. I’d still recommend it for anyone who needs a quick, reliable solution, as long as you’re aware you may have to make minor adjustments to get the best fit.
Lititia Charron
2024-12-14 15:10:10
Good quality product. Fits correctly and a fraction of the cost of a big box hardware store.
Rock'tRobbie
2024-12-05 18:16:02
Bought this to reduce range exhaust fan to clear wall stud. Excellent quality with welded seam.
Recommended Products
