Your cart is empty.
Your cart is empty.The Edelbrock Carburetor EPS 800 CFM Electric Choke is designed and calibrated for maximum street performance with most Performer RPM, RPM Air-Gap and Torker II manifolds and with Performer manifolds on large cubic-inch engines. It features two piece, all-aluminum construction for cooler fuel and less warpage. Tests proved that the EPS 800 carburetor outperformed a Holley 3310 750 CFM carburetor out-of-the-box by 26 ft./pounds of torque and 22 horsepower on a small-block Chevy engine equipped with performer RPM components. There are no gaskets below the fuel level for easy adjustments without removing the carburetor. The EPS 800 has the same superior features as the rest of the Performer Series line such as out-of-the-box performance and 2-piece design. It features a high capacity accelerator pump and an improved primary and secondary cluster design. There are no plastic parts to break and no power valves to blow out. The metering rods can be changed within seconds without carburetor removal. It comes with 113 primary metering jets, 101 secondary metering jets and 0. 071 x 0. 047 metering rods.
Northern Lights
2025-08-27 18:13:26
Replaced my old Quadrajet and I couldn't be any happier with the performance of my Chevy 396.Easy and quick change-out. The Edelbrock worked perfect right out of the box with the only adjustment being to the throttle idle setting.A couple of things to be aware of when replacing a Quadrajet with Edelbrock.1) You may have to install an in-line gas filter.2) Depending on the style of your intake manifold, you may need an adapter underneath of the new carburetor.3) Not all air cleaners will properly fit on an Edelbrock, but fortunately Edelbrock makes some beautiful, show quality, affordable air cleaners. My recommendation is to install the new carburetor, then measure for hood clearance before selecting an air cleaner.
janet matthews
2025-08-09 18:00:23
put this Edelbrock 1413 800 CFM carb on my Big Block chevy 468 CI. replaced two failed EFI units. What a difference !!! can actually tune this carb without a laptop. Never again will I spend thousands of dollars on EFI units.I can speak very highly for this product.
T. Lee Horne III
2025-06-28 10:25:21
Since I had to take the old carb off and I have been wanting to see if a larger carb would help my 454 pull a new trailer, I stepped up from a 600 to and 800. The difference is well worth the price of admission.
DOITLAYNSTYLE
2025-05-21 14:38:41
Slapped this big dog on my RV 454 and got instant performance out of the box. So much better than the quadrapuke garburetor that was on there. Now it fires on first turn of the key and it idles.
Casey & Jessica Smith
2025-05-12 12:00:49
Works great for country drives on my 429 with the performer 460 intake manifold but not good at all when it comes to stop and go driving in the city. It almost feels like the choke is malfunctioning causing it to bog down after stopping at a light. I just ordered a wooden carb spacer because I'm starting to think it might be a fuel boiling issue when the car warms up. I will update this review when the spacer arrives and I test it.
LM
2025-05-03 14:25:25
Easy installation works great
David Dicus
2025-04-30 18:48:35
Matches my intake, bigger than the 1407 I had on it, it's brand new, hasn't been rebuilt 10 times, came w/video to explain some stuff. MADE IN AMERICA!!
Ralph Leon
2025-03-27 17:53:05
Worked good
ttsnesbitt
2025-02-15 12:21:03
Works great
Recommended Products
