Your cart is empty.
Your cart is empty.The Edelbrock Needle and Seat includes a pair of spring loaded needles and seats. The needle is made of Viton material. This carburetor needle and seat is designed for off-road applications. The size of the seat is 0.0935. The weight is approximately 0.03 pounds and it is not adjustable and spring loaded.
Brett Aaron Jones
2025-07-30 15:26:09
Install went smooth, had to re adjust the float level. Haven't noticed much difference offroading cause ive been at crazy angles before and it didn't stall. But for the price I figured I'd buy it
LCH
2025-07-19 17:03:48
perfect upgrade for my offroad jeep with the edelbrock carb on a chevy 355. also blocked off the overflow tunnel between the floats works a lot better now
DIY guy
2025-07-13 17:40:07
Installed these in a Edlebrock AVS 2 that I'm running on the street, to try to help the usual symptom of running out of fuel in hard cornering. I could not get the float level adjusted correctly, despite following the directions and not pressing down on the floats when adjusting. Car was missing and seemed lean. Removed them, reinstalled the original ones and readjusted the float level and back to running fine. For the fuel starvation issue, I ended up installing a small section of 3/8" fuel hose of about 3/4" long that I pinched into the connection passage in the back of the carburetor that now prevents fuel sloshing across from one side to the other and uncovering the jets.
Customer
2025-06-20 17:09:34
I bought this kit to try to keep my Edelbrock carb from stalling around corners. The problem is still there, but it's not as bad as it was.
RambleSlate
2025-06-01 20:54:40
These needles and seats installed easily once I figured out how to seat the top plate back on the carb. The (2) long mixture needles need to go into the base with a little jiggling so they must be loosened at the top first.
FlyinHawaiian
2025-02-09 18:38:00
Solved 90% of my offroad fueling issues. No more stalling at steep inclines/declines! Install took 20 min. Great product! Why the heck didnt edelbrock just install these from the factory on all their carbs??
patrice herston
2025-02-05 17:48:15
When you put them the way the instructions said they wouldn't work
Laurence M.
2025-01-21 17:54:40
Good
Guillermo Tovar
2024-12-10 10:04:48
Si tienes un vehÃculo off-road con motor carburado, y usas un Edelbrock, esta modificación es una de las primeras cosas que debes hacer para evitar que el vehÃculo se apague constantemente en inclinaciones. El montaje es muy sencillo si ya has trabajado con carburadores Edelbrock Performer, pero debes cuidar colocar el setting de los flotadores al nuevo nivel, ya que de no hacerlo, puedes causar un efecto contrario al deseado, y el carburador estará "flotado" todo el tiempo
Recommended Products
$23.95
$ 10 .99 $10.99