Your cart is empty.
Your cart is empty.
High quality wood veneer edge banding
Wood edge banding is used to cover the exposed sides of materials such as particle board, plywood, metal or MDF. The veneer edging increases the durability of your project as well as giving it a perfect finish.
Real birch wood pre-glued edge banding
Our birch wood edge banding is pre-glued with a German high-quality adhesive that provides a strong, permanent bond. The glue is activated by heat and will strongly apply this high-quality veneer edging onto your shelf, furniture or DIY project. You will receive 1 x 2” roll of birch wood, iron-on veneer edging with your purchase.
Easy to install plywood edge banding
The only tool you need to apply this veneer edging is a regular household iron. A hot air blower or edge banding machine can also be used if you have these to hand, but a regular iron will be sufficient for a great application. To apply, simply position the veneer edging on the edge of your plywood or other substrate and smooth it with a few passes of an iron or slide it through an edge-banding machine. Suitable for straight-line edges as well as contours. Bandings are impregnated with a high-speed hot-melt glue that creates a permanent, durable bond.
BUY NOW and complete your furniture and cabinetry edging with this premium quality, iron-on birch wood veneer edging
John Dinger
2025-08-25 14:28:17
Edged some cabinet doors and found this product very nice to work with. I only have a regular laundry type iron to heat the strip, but it worked perfectly. One pass at about 10 seconds per foot, at the high-heat setting, seems just right to get the correct heat for adhesion. This would of course depend on the heat power and size of the iron you're using.
lost texan
2025-08-24 11:23:02
Used on a cedar chest restoration project. Ironed on without an issue. My project turned out awesome.
DWS
2025-06-12 14:26:00
Product impeccably made. Glue was evenly distributed on the back to allow for great contact when iron was applied. First time using edge banding and was really impressed with this product. Sands really well by the way and takes paint well.
Beau blank
2025-05-03 18:54:07
Just irons on, it's that easy. I'm only going with 4 stars because there is a seam every 3 or 4 feet that doesn't look that great. Other then that, the glue works very well and stays on.
D. SCHROEDER
2025-03-15 12:33:33
I had just built a new computer desk; but, I was happy with some of the unfinished ends and edges on parts with open cuts on the wood. After using a narrower veneer for the desktop front edge, I needed to find a wider veneer to cover up the ends of the drawer supports where I had stacked two pieces of wood. This 2" roll was perfect, and not exactly easy to find in any local home store or hardware store; so, thank you Amazon as always!All I needed to do was cut the pieces need, uae a typical house iron (I set mine on the cotton setting with no steam), press down and iron the piece in place, let it cool, trim off the excess with a sharp blade, sand the edges, and put a couple coats of poly acrylic on itso it matched the rest of the desk and protected the wood, and VOILA! I much nicer and finished looking desk. I only had to use three 3" pieces from the 25' roll; but, it was worth it, and now I am ready to finish future projects.
Customer
2025-02-28 13:02:37
This birch edge banding is size perfectly, and is of excellent quality. The hot blew backing adhered flawlessly. I used it to conceal the plywood edges on a set of cornhole boards. It worked perfectly.
Paul Benicky
2025-02-10 17:11:12
Easy to apply.
Joel Smith
2025-02-05 18:07:29
It's oak match my ply great but I hate where they connect you can see it more when you apply varnish.
Bob Allan
2025-01-05 13:58:41
Excellent product and prompt response from seller. High quality product as described.
Recommended Products
