Bought this to help me start a roadside assistance business, and haven't regretted it once!Worked right out of the box!Keep in mind that this thing is a little tall, you might need to manually scissor jack your car up an inch or two before placing this, or find an alternate lift point.Other than, that. Perfect. The box it comes in is very sturdy, and snug.It comes with multiple fuses in case you burn out the cigarette lighter, you can sequence power it by running jumper cables from the car battery to the included alligator clip power attachments.A few tests were run on it on my personal vehicle before taking it into the field:2016 Honda CR-V was lifted with no trouble. Held steady. Chucks didn't budge an inch. It did leave some marks on my frame where it bit into the steel, but that's a risk of the job at hand. No dents, no bending.Emptied out my tires- the air pump effortlessly brought my tires up to 50 psi, directly on the ground within about 90 seconds.The upwards facing LED is a game changer.The red and blue lights on the back are really nice! I set it on the top of my car facing oncoming traffic while I set up my cones and work area. People give it a wide berth.Excellent deal for the price - and I bought it full price, annoyingly enough lol. At 85 bucks, this is a steal.

Works as advertised with plenty of lift clearance.

I love this Jack .I live out on a ranch with a lot of dirt roads.we use it on our crew cab cab pick ups. It works great. The only downfall is that the cord is not long enough if you don’t have a plug-in in the backseat area.A++++ orherwise

This saves so much time and effort jacking up the car. I am keeping in my trunk for the next flat tire. It also has air compressor which i used to fill up my spare tire. Highly recommend.

The main issue I have with this product is the poor design of the impact wrench. There is a warning that comes with it that is written in broken english and makes no sense, it says "do not turn on drill and leave on or drill will no longer function". After removing the first two bolts the drill stopped work entirely.Even if the impact wrench had removed the bolts successfully I would be very hesitant to use it as it felt very cheap and was almost all plastic - I would be concerned with something breaking apart and shattering the outside plastic, causing injury - it felt that unsafe to use.The hydraulic jack itself worked OK, but it felt extremely flimsy and also seemed to be very dangerous and unstable - I would not feel comfortable trusting this jack in any way.For the price point, these items felt way too cheap and honestly I wouldn't want to use them at any price point.

As someone with experience installing spares on the road after a punctured wheel using the tools provided with the spare, I know it is a grueling and painful experience it is. Not only does it take a lot of energy and time to lift the car with the manual jack, but the biggest problem is when nuts are tightened by the mechanic at the car shop using the tool. You are trying to untie them using merely a tire iron. In many cases, you have the spare, and you have the tools, but can't exert enough force to remove the bolts. Furthermore, it's easy to break the studs, making your situation even worse. Turning the simple spare change into a guaranteed tow as the car is no longer safe to drive will also require extra money for the stud removal and replacement.Yes, you might have road assistance with your car insurance plan, but it sometimes takes hours for them to arrive, or you may not have it with your car insurance provided; in this case, it can cost you more than this toolkit to simply change the tire to spare.With the FEANISIFEI Electric Car Jack Hydraulic Kit, it's just a breeze to insert the jack under the car, connect it to the cigarette lighter port, and press the button to lift a car. In 30 seconds, your vehicle is lifted and ready to remove the bolts. You disconnect the power from the jack (don't worry, it will not drop the car once disconnected), connect the bolt removal tool, and in less than a minute, the bolts are unscrewed; you can proceed to attach the spare and tighten the bolts with the same tool. Then, reconnect the jack to the power line and lower the car back on the ground. The change is done. Everything takes less than 7-10 minutes.The compressor feature is a nice plus, as you can quickly inflate the deflated tire. A flat semi-flat spare not used in a decade and sitting in the truck is relatively common. The semi-flat spare is unsafe and can easily fail. There is also a set of fuses and toolkits hidden in the other compartment. It is a bit situational, but it might help. There is also a kit of adapters if you want to use the jack to inflate the bicycle tire, deflated basketball, or even a balloon which might be rarely needed, but you have this option.You can also easily change the wheels for summer or winter sets or even replace the wheel covers for more fancy ones without going to the shop. Remember that the calibration setting requires little weight on the wheel's outer rim to be in a specific position to prevent high-speed tire vibrations. Make sure that the position of the weight on your new wheel matches the position on the old wheel; it can save you a trip to the shop to do the calibration.The jack has no battery, so the car must be running when you use it. To use it on a vehicle that doesn't start, you will need a battery; there is a clamp kit that can be connected to the car battery directly. You can also purchase a battery-powered starter to power your jack if you purchase one; look for the model with a cigarette lighter port connector as an option to make things a bit easier than dealing with clamps. If you do use clamps, make sure that you keep the polarity right from red to red, black to black.The toolkit case is robust and can work as an emergency sign if you have a punctured wheel on the highway or a busy road. The jack has red and blue emergency lights that can help drivers to see you in the dark while you working on your wheel.The final piece of advice jack surface area is relatively small, so it is important to put it into the correct reinforced spot underneath the car (there is a little LED light on the jack that helps you to find it in the dark); otherwise, you can leave a nasty dent on the underbelly of your vehicle that is difficult to repair.With FEANISIFEI Electric Car Jack Hydraulic Kit, you can also be a good samaritan on the road if you see the driver struggling with the manual tire change kit since it doesn't cost you much effort and can save someone's day. All can be done in mere minutes, with most of the time it would take to explain to the driver what you are planning to do.

I was impressed with the strength of the jack. It was able to pick up my F250 and hold it steady. This is a great tool to keep in your car for an emergency situation.

Muy útil y eficiente... lo recomiendo para tenerlo en el auto... gracias

Good quality material, seems well made, easy to use. Happy I got this for emergency use if need arises.

So impressed with this jack. so simple and my back doesn't kill.

This item is very well made and compacted nicely into its carrying case.Very easy to use. I like to change my own tires and rims so it will save me a lot of lugging my floor hydraulic Jack around.And I can carry this new Jack with me in the event I have a roadside flat.

Cadeau de Noël

Solid build quality, quick lifting action. Does not get low enough to get under my 3 series, but good for my suv, included impact driver was a bonus. Very easy to use and good value.