Shopping Cart

Your cart is empty.

Your cart is empty.

Electric Gear Motor 110V 200W 20K Electric Single-Phase 24.1 Nm High Torque AC Gear Reducer Motor with Speed Controller 0-68 RPM Adjustable Speed Gear Reduction Electric Motor

4.7 (8) Write Review
Free shipping on orders over $29.99

$99.99

$ 47 .99 $47.99

In Stock

1.Color:10k 250w


About this item

  • 【HIGH QUALITY MATERIALS】The high-quality aluminum alloy gear motor housing is wear-resistant, anti-shock, high-temperature resistant. The motor uses thickened alloy steel gears for precision and high torque. The copper coil inside has good conductivity and can dissipate heat well. The terminal block of the speed governor is machine-welded, more delicate and less prone to dummy welding and desoldering than manual welding.
  • 【INFINITELY ADJUSTABLE SPEED】The slow start function can effectively avoid current overshoot and protect the motor, and it comes with a speed reducer to better control its speed within a proper range of 0-68 rpm, allowing you to infinitely adjust the speed by the speed governor. There is a speed knob on the speed governor for you to control the motor speed, and there is a speed scale to facilitate you to adjust it to the right speed.
  • 【STABLE OPERATION】The ball bearings are equipped on both ends of the rotor of the motor, which makes the motor run with low friction and produces low temperature, giving you a more stable operation. The motor has large torque, strong speed-up and stronger overload capacity, and can reach the power required by the machine faster. The noise of this motor is only 40 db when in use to create a quiet working environment for you.
  • 【HUMANIZATION DESIGNS】The indicator light on the speed governor will light up when the motor is working, which is convenient for you to better understand the usage status of the motor. The wiring port can make it easy for you to switch between positive and negative wires and easily achieve positive and negative rotation. The cooling window design on the bottom can effectively dissipate heat to ensure long-term stable operation.
  • 【COMPLETE MOTOR KIT】This is a complete gear motor kit in the package, including a motor, a speed governor, and an English manual, very convenient for you to use. It is widely used in packaging, printing, textile, dyeing, chemical, food, and pharmaceutical construction machinery as well as advertising, office, petrochemical, instrumentation, stage lighting, transmission, automatic warehouse, parking, and other equipment.


Description:

◆ The gear motor is made of high-quality aluminum alloy housing, wear-resistant anti-shock high-temperature resistant.

◆ The coil inside is made of copper, has good conductivity and can dissipate heat well.

◆ This motor uses thickened alloy steel gears for precision and high torque.

◆ The ball bearings are equipped on both ends of the rotor of the motor, makes the motor run with low friction and produces low temperature.

◆ The motor comes with a speed reducer to better control its speed within a proper range of 0-68 rpm.

◆ The terminal block of the speed governor is machine-welded, more delicate and less prone to dummy welding and desoldering than manual welding.

◆ There is a speed knob on the speed governor, you can control the motor speed by gently twisting it.


Specifications:

◆ Voltage: 110V

◆ Power: 200W

◆ Output Speed: 68 RPM

◆ Rated Torque: 24.1 N.m

◆ Gear Reduction Ratio: 20K

◆ Reduction Gearbox Size: 3.3'' x 4'' x 2.6''

◆ Reduction Gearbox Shaft Length: 1.4''

◆ Reduction Gearbox Shaft Thickness: 0.6''

◆ Reduction Gearbox Key Width: 0.2''

◆ Reduction Gearbox Shaft Eccentricity: 0.8''

◆ Reduction Gearbox Aperture: 0.3''

◆ Reduction Gearbox Disc Diameter: 1.5''

◆ Reduction Gearbox Disc Height: 0.35''

◆ Diagonal Mounting Hole Distance of Reduction Gearbox: 4.7''

◆ Hole Applicable Screw of Governor Box: M8

◆ Speed Governor Size: 3'' x 2'' x 3.5''

◆ Speed Governor Weight: 0.66 lbs

◆ Speed Governor Panel Size: 4'' x 2.4''

◆ Motor Size: 3.3'' x 4'' x 7''

◆ Motor Weight: 15 lbs

◆ Package Size: 33'' x 10'' x 5''

◆ Shipping Weight: 17 lbs


Package Includes:

◆ 1 x Gear Motor

◆ 1 x Speed Governor

◆ 1 x English Manual


clint hutton
2025-07-24 18:07:21
I think it should have been with the motor but it worked good thank you
Stephen Hart
2025-07-05 15:37:00
This motor and gear box works fine for my application.It is not a turnkey solution, but more like a kit.Take care: the multiprong plug connecting the controller to the motor is only labelled in Chinese. (English wire color order is on the controller.)Be sure the ground end of the plug matches up with the ground end of the socket. They are marked with a usual EARTH GROUND symbol. ⏚Additional warning:As my unit arrived, the plug and socket are the reverse of the way they should be, with the plug connected to the controller. This leaves one of the longish prongs electrically live (120v in my case) even when the switch on the controller is in the off position.I reversed the plug and socket (fiddly, but doable with care).At least, never plug the power cord in without the plug and socket connected. They do not lock together.The controller does not come with a reversing switch, though a reversing switch "L" is mentioned in the directions. I bought this switch at Amazon and it works fine:QTEATAK 2Pcs DPDT 6 Pins 3 Position ON/Off/ON Black Rocker Toggle Switch for Car and Boat AC 20A/125V 16A/250V KCD4
Charles C.
2025-06-03 16:33:40
I purchased a gear head motor that didn’t come with a mounting bracket. When I tried to order a bracket that would fit the bolt pattern of the motor I bought, I couldn’t find one anywhere on Amazon. I finally had to buy one that was too large and drill holes in the pattern I needed Fortunately the bracket had enough “meat” to allow the adjustment. Would have been much easier if the motor came with a matching bracket, thus avoiding all the hassles.
brian
2025-04-15 11:03:48
It works but not for what I was planning on using it for
Danny Myrick
2025-03-15 10:41:34
This is a good product work's great 👍
MM
2025-01-29 17:34:30
One of the most important question, to be able to install it the shaft diameter.Not published on the pictures, or not shown in the product description, as of 2023 Jan.
Lisa Schmatzhagen
2025-01-23 13:30:02
The picture shows the manufacturer and gearhead part number. Try searching for the part number of your particular gear/motor to get accurate dimensions.
truth
2024-12-27 12:56:49
This is advertised to rotate at 450 RPM, but it only spins at 380RPM. I also tested the motor itself without the gear reduction thinking they might have sent the wrong ratio, but the motor spins at 1130 rpm. fail.