Your cart is empty.
Your cart is empty.Product Description
ELEGRP LIGHTING CONTROLS--Motion Sensor Light Switches
INNOVATIVE PIR TECHNOLOGY
The ELEGRP motion sensor switch uses passive infrared (PIR) detection technology via a segmented Fresnel lens to monitor a room for occupancy. This specialized lens divides the field of view into sensor zones. When a person passes into or out of a sensor zone, the sensor detects motion and switches the lights on. If the sensor detects human motion before the TIME delay elapses, the sensor will re-clock for another TIME setting cycle before it automatically turns off the loads. If the sensor switch is kept being triggered by human motions, it’ll keep the light on until time delay elapses and no human motion is being detected during this period, or manually switched off.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
- Applicable load types (200W for LED/CFL, 500W for MLV/, 500W for INC/HAL, 5A for Ballast(120V), 1/6HP Fan(4.4A 120V).
- Extremely low standby power consumption.
- Flame resistant material has reached the highest grade of 5VA.
- UL & CUL listed.
MULTIPLE SETTING MODES - Features multiple setting modes for different usage scenarios at home
———————————————————————————————————————————————————————————————————
Timeout* *"Timeout" is the delay before light turns off after the room is empty.
(0) 30 seconds (1) 1 minute (2) 5 minutes (3) 15 minutes (4) 30 minutes
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
PIR Sensitivity
(0) Motion Sensor Off Manual-On/Manual-Off.
(L) Motion Sensitivity Low
(H) Motion Sensitivity High
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Ambient Light Sensor Mode
(0) Vac(Vacancy Mode) Manual-On/Auto-Off.
(1) AL-Low (Ambient Light Low) Auto-Off/Auto-On when Ambient Light is dark.
(2) AL-High (Ambient Light High) Auto-Off/Auto-On when Ambient Light is bright.
(3) AL-OFF (Ambient Light Sensor Off/Occupancy Mode) Auto-On and Auto-Off regardless of ambient Light level.
(4) AL-Custom (Ambient Light Custom Settings) Auto-Off/Auto-On when Ambient Light level is lower than the level set by customer.
LARGE COVERAGE
This motion sensor switch provides an adjustable 120-degree field of view with optional adjustments for sensitivity, ambient light override, and delayed off time. The sensor detects motion in areas up to 900 square feet and up to 35 feet from the sensor, ideal for the porch, closet, garage, hallway, stairs, basement, pantry and laundry room, etc.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
The inside LED indicator will flash when the sensor detects human motions.
Install the sensor switch about 4 feet from the floor to get a better experience.
Hot objects or moving air currents can affect the performance of the sensing switch.
The sensing switch requires an unobstructed view of room occupants to detect motion.
—————————————————————————————————————————————————————————————————————
Enjoy Energy Saving, Convenient and Safe Life
Energy Savings
Save cost and energy by having the unused lights and fans turned OFF automatically, preventing the light from turning on if it is already bright. Never leave a light on by mistake again.
Vacancy mode’s manual-ON feature saves further energy by ensuring lights are only turned on when needed.
Hands Free
Keep your lighting control hands-free as you walk into your home with groceries or into the laundry room with a full basket. The motion sensor switch is ideal for rooms you typically enter with your hands full, regardless of whether they are located in the home or workplace.
Safety
ELEGRP EKA23 motion sensor light switch is the safe choice for seniors, children, and employees, making sure that lights automatically turn ON allowing occupants to see where they are going to reduce the risk of trip-and-fall accidents.
Important FAQ:
1. Q: My house does not have the neutral (white) wire or only have one neutral (white) wire, can I use the device?
A: No! This device will not function if there is no white (Neutral) wire or only one white wire in the wall box.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
2. Q: Why LED Indicator does not flash or light does not turn on automatically when power has been restored?
A: There may be 2 reasons:
1): Ensure there are Neutral (white) wires in wall box and they had been connected with white wire from sensor switch.
2): Ensure Line (usually Black) wire in wall box has been connected with Black wire from sensor switch and Load (usually Black) wire in wall box has been connected with red wire from sensor switch. Try to swap two black wiresif the symptom still exists.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
3. Q: Why the Lights do not turn on when space is occupied?
A: There may be 3 reasons:
1) Ensure PIR Sensitivity is not set to Motion Sensor Off (“0”) position.
2) Ensure Ambient Light Sensor Mode is not set to Vacancy (“0”) position.
3) Ambient Light Sensor Mode may be set to “AL- Low”, which will not turn on the light if there is enough natural light in the room. Set Sensor Mode to AL-OFF mode.
———————————————————————————————————————————————————————————————————
PRODUCT SPECIFICATION
ChemE_75
August 18, 2025
Typical install was easy enough. Fits ok, even with a crowded box. Got version that uses neutral since it’s available and seems better than using ground although they are basically the same for AC. Psychologically, I like that it does have separate ground. Previous one had neutral so I had to remove it anyway. I have 3 stripped down basic versions direct from China that cost 1/3, only have time adjustment/no sensitivity - but 1 of them went flaky in the laundry room toggling light on/off randomly. Others are in closets and seem fine. This one has been good so far, quickly triggering upon entry from either behind via garage or from front via kitchen with medium sensitivity. I think the 120 deg range helps avoid the false triggering the previous suffered which has 180deg range. The wider range may have caught warm air venting on back side of the mini fridge or it’s just a typical low quality knockoff. Anyway, the 120 deg of this model avoids that corner of room. I also like the simple dial adjustments, no complicated button pressing sequences to try to remember. FWIW, I am using this in a 3-way switch circuit. I simply used my tester to check the power and labeled the travelers from the main switch - basically leave the main switch alone, I leave it off/down and use that powered traveler as the hot for the sensor switch black wire, cap off the second traveler, connect red to load/light, white to neutral and green to ground as normal. Works perfectly fine. Easy enough to ignore the main switch.
markdwig
July 23, 2025
Good product, works as described but does take up a lot of room in the box.
Krees
June 12, 2025
Easy to install. Works great. Adjustability is a plus and not something you normally see in this price range.
William Breckenridge
May 16, 2025
Put just inside the walk in door to my garage and was able to adjust the sensitivity so when entering the garage from the other end it turns the lights on. This works great.
Ramon Padilla
March 27, 2025
Looks great, easy to set up and installing it is a breeze. Thinner than the one I replaced.
Frequent shopper
March 9, 2025
I am a DIYer and it only took me 20min to get this working. Pretty simple and works great!
thomas j mascio
January 2, 2025
Not good at all.You have to be in the room and “dancing†around for it to sense anyone is there. A complete waste of time and money. Still need functioning sensors to replace these now
Bass
November 13, 2024
I installed this in my walk in closet. The ability to have it turn on for a set amount I time is great! Sensor is sensitive enough that when I enter into the back of my closet from the laundry room bypass, light quickly turns on saving me from having to walk across the closet to turn the light on. It’s made life easier when doing laundry!
Recommended Products
$24.99
$ 12 .99 $12.99