Your cart is empty.
Your cart is empty.ENERGY SUSPN Energy Suspension 3.9102G Pull Thru Bump Stop for GM
Joey
August 13, 2025
The only special tool I had was a very big C clamp. I lubed the edges with grease, rested the control arm on a piece of wood and used another piece of wood to distribute the force of the c clamp on the bump stop. I used a spare piece of pipe as a spacer to keep the bump stop from folding over, as the control arm was resting at an angle. It really helps to have one person holding the control arm in place and one person turning the C clamp, but it went right in without fuss.
D. L. Morehead
June 26, 2025
They have a silicone texture and fit easily!
Ernest Ausiello
June 17, 2025
Fix perfectly and works great.
Phil
June 8, 2025
So glad I found these! Spent hours trying to get new ones from a reputable aftermarket automotive site to fit with no luck. Ordered these at a fraction of the price and they popped in no problem on the first try. I just pushed them in as far as I could by hand and then jacked up the car and it pressed them the rest of the way in and are nice and snug and secure after letting the vehicle back down. 15 minute job, didn’t even have to take the tires off.
Angelo M.
June 8, 2025
These polyurethane bump stops are the perfect upgrade and alternative to stock rubber bump stops. They are actually cheaper than reproduction rubber bump stops and should last much longer too! Though polyurethane bushings are sometimes frown down upon for a daily driver due to their tendency to get squeaky over time, polyurethane for bump stop use shouldn't be a concern.As the other review notes, the "does it fit your vehicle" wizard for this product is not complete. If in doubt, go to one of your other popular auto parts suppliers and cross check the part number. I am installing them in a 1981 Firebird Trans Am. Do a quick search, you'll find this part fits a lot of GM cars through the years (70's+). At least my searching shows that this fits 75-81 Firebirds and Camaros.These particular bump stops are a bargain from Amazon. You will pay more anywhere else!Tip: Install these bump stops before you re-install your A-arms. Bump stops are much more difficult to install once you have springs and shocks installed.
Shell
May 5, 2025
hard to say much about these, theyre not something you nitice very often. They install easy, dont seem like they will fall off (although the fit isnt super tight). Perthaps Thy should be a little taller, but maybe Im wrong... They work.
Stephen
April 1, 2025
Fixed the problem
shopper1
February 17, 2025
Size and fit are the same as the originals in 1980s GM car.
Recommended Products
$21.99
$ 10 .99 $10.99
$8.69
$ 3 .99 $3.99