Your cart is empty.
Your cart is empty.ENERGY SUSPN Energy Suspension 9.8105G End Link Grommet , Black
F. Schuldt
July 15, 2025
These are decent quality polyurethane bushings, and they come with the concave washers, which are thick and zinc plated. If you are planning on using them on a metric 10mm application, you will have to clearance the washers a bit, as they are sized only for 3/8".
Chadney R. Kinsey
June 21, 2025
These were installed on a 2004 Silverado with a rancho lift. They were a huge improvement to the stock rubber that was on the truck. The rubber was flattened from years of use. I hope to get many more miles of use on these. They fit my bolt without modification. I installed these along with new sway bar bushings from Energy Suspension. Both have improved the felt body roll with make turns while driving.
monserrat Reyes
June 16, 2025
While product looks great and grommets were able to go on without issue, there was slight modification needed in order for the provided washers to fit onto the sway bar link.(1st gen sequoia)
Scott C.
May 26, 2025
They work well but do need replacement over time just like rubber ones do. My first set was cracking and falling apart after about 7 years/ 50kmi in my '98 Trans Am. My rears seemed to wear out much faster than my fronts for some reason, just fyi. On my second set now, no complaints.My car is lowered on Strano springs with Koni sport shocks, larger rims and tires 275/40-17 front, 295/35-18 rear. Poly transmission and motor mounts, Strano sway bars and all the upgraded suspension pieces . So my car has always been a firm ride so i can't comment on how much these alone have affected ride performance or comfort, but an educated guess is they should help make your car feel less squishy on hard turns but worth the trade off of you feeling bumps in the road more vs. Stock rubber.
Chuck J.
March 24, 2025
These were the perfect replacement bushings for a 30 year old performance sway bar! These are just like the original, high quality pieces. The handling has returned to spectacular!
Fordman
January 12, 2025
In the "product description", which part of these grommets measure 9.1" and 3.8"?? The .9" measurement almost works out for their height if you measure them from the washer up to where they meet the sway bar, with their overall height actually being 1.0".How do I know that some high school level "stocking engineer" figured out what he/she thought would be helpful product information to us?!
Heather
January 8, 2025
Bought these ES Grommets to replace some 4 year old rubber ones that became tired and squarshed on the OEM Front Sway Bar. Truck is a 2002 Toyota Tundra 4.7 4wd SR5. The ES is a much firmer grommet than the old ones which were rubbery. The Import Direct Sway Links were still in good shape but the grommets took a beating.Only needed 4 grommets and this kit comes with 8 so there are spares for the future. Needed to slightly drill out the warshers like others mentioned. The grommets slipped on guddën tight without modification. Used some MolyB Grease to help keep things protected and provide some slippy doo.Truck was already pretty firm, but these new ones feel much better. Separately, the Hellwig 7700 Rear Sway Bar is a nice addition and totally changes the truck feels on a 1st Gen.
Nanci McInnes
December 7, 2024
the packaging and look of these items were great. They seemed like they would do the job and they’re inexpensive from others I’ve researched. I’m sure they would have been great, unfortunately they were missed advertised as I have a 4x4 vehicle and these did not work. Amazon refunded me immediately.
Recommended Products
