Your cart is empty.
Your cart is empty.Product Description
90 Degree Swivel
Compare Hose End Fitting
6AN | Size | 6AN |
90 Degree | Angle | 90 Degree |
2PCS | Number of packages | 1PC |
Black | Color | Black |
stainless nylon hose | Applicable pipes | stainless nylon hose |
6AN | Size | 6AN |
90 Degree | Angle | 90 Degree |
2PCS | Number of packages | 1PC |
Black | Color | Black&Red |
stainless nylon hose | Applicable pipes | stainless nylon hose |
6AN | Size | 6AN |
90 Degree | Angle | 90 Degree |
2PCS | Number of packages | 4PCS |
Black | Color | Black |
stainless nylon hose | Applicable pipes | stainless nylon hose |
- 90 Degree Swivel
- 90 Degree Swivel
- 90 Degree Swivel
-
-
Nylon Braided CPE Fuel Line
Can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel.
-
AN Hose Fitting Adjustable Wrench
AN Adjustable Wrench can meet the needs of different sizes. It is in contact with four opposite surfaces, more tight, not easy to scratch.
-
PTFE Hose End Fitting
Only work with PTFE fuel line. Designed by 360° swivel for easy assembly.
-
AN to Hardline Tube Fuel Fitting
Applicable to stainless steel or aluminum hardline tubing. Widely used in brake systems, oiling systems and cooling systems.
-
Push Lock Hose Fitting
EVIL ENERGY provides push lock hose fittings with striaght, 45 degree and 90 degree. The barb fitting only work with rubber fuel line.
Alan
2025-07-21 15:42:06
Have used these several times, no problems no leaks, just follow the included instructions.
Brooklynn Porter
2025-06-20 11:38:08
Hopefully holds up better than the first kit I purchased? These are working good so far.
New Jersey girl
2025-04-02 17:46:52
Great product but to big to use on a Harley davidson fatboy oil cooler lines
Ryan R.
2025-03-22 21:58:43
I say the same thing over and over about Evil Energy, they sell great stuff. You can't go wrong with them. Everything I have ever got from them has been great. It all looks good and is packaged really nice. and to top it off they have great pricing. I always look for this brand when buying AN fittings and hoses.
Brandon
2025-03-13 16:26:15
Very easy to use. Left hand thread for the line into the fitting is nice. No issues at all.
Michael Sharpe
2025-02-23 13:24:54
Works great
Josh Hyatt
2025-02-11 17:44:19
Good finish, good fit. Good pricing
Tyler
2025-02-06 10:41:05
When reading other reviews, the most common problem I found was that the fittings were too small to fit the -10 hose. I was prepared for this issue, but saving $10+ per fitting is worth a little modification. When I got the fittings, they were, indeed, too tight for the hose. I took some sandpaper and spent about 2 minutes sanding each one. One coarse grit and one fine grit. After that, they fit perfect. Nice and tight, and they butt right up to the flat part inside, where it’s supposed to. After sanding, they weren’t extremely difficult to twist on. With a mechanic glove and a good firm grip, they went on great and I couldn’t be happier.
Gil
2025-01-17 13:11:00
A
Etienne Gallant
2025-01-03 16:17:25
I use these fittings for fabricating a PS cooling hose. The first one i made was equipped with an inline filter. The idea of a filter is great for warmer temperature, not for Canadian winters. The second hose is made with nylon-braided material. These fittings were easy to install on the hose with a press (please read my other review).*on the picture it is the lower hose*
Thestandingo
2024-12-13 16:38:54
They feel good seem to be similar to my mishimoto AN fittings
Rick Bruner
2024-12-06 17:35:38
I’ve bought a lot from evil energy love their products
Recommended Products
$12.99
$ 6 .99 $6.99
$14.99
$ 7 .99 $7.99
$21.11
$ 10 .99 $10.99