Your cart is empty.
Your cart is empty.Product Description
Provide everything you need to provide low volume, low pressure stream for a fridge, humidifier, ice maker, and much more with the self tapping saddle valve kit. The natural gas saddle valve supports 3/8 inch to 1-5/16 inch OD (outside diameter) tube, and features a 1/4 inch OD (outside diameter) compression outlet on the needle valve. This brass self piercing saddle valve washer comes already assembled with a captive sleeve, which puts even pressure on the tubing, which ensures a tight seal and allows the brass self-piercing saddle valve to be installed quickly and efficiently. This drain saddle valve is constructed of strong and sturdy brass, certified lead free, and suitable for all potable water supply installations.
From the Manufacturer
This Brass Self-Piercing Saddle Valve comes already assembled with a captive sleeve, which puts even pressure on the tubing, ensuring a tight seal. This valve can be installed quickly and efficiently. This valve is constructed of strong, durable brass and is lead free and suitable for all potable water supply installations.
Jessica T
2025-08-16 12:54:00
Used this to connect our fridge water line and it was super easy. Had it hooked up in a matter of minutes.
BobbyG
2025-07-27 16:44:57
After discovering that our HVAC humidifier line was installed incorrectly on the cold water line by a contractor I ordered this to correct the problem. The saddle valve is well made and was easy to install with nothing but a Phillips Head screwdriver and an adjustable wrench.
Keith Wayne chambers
2025-07-20 13:45:49
Works great
PETER S.
2025-07-16 12:55:01
Works OK, and about half the price of Lowes similar product.
Dana M
2025-07-14 16:36:25
Worked perfect. Old one wouldn’t open up to let water thru. back to full water pressure. Couldn’t be happier! Happy Holidays!! 🎄
Henry Ford
2025-07-09 17:47:54
These are prone to leaking but they do work in cases where you cant install a proper supply fitting.
Bob M
2025-06-08 16:52:12
Used it to run a water line to the fridge ice maker in the garage. Solid built and worked as advertised.
Abdul R.
2025-05-28 20:33:47
I like it’s easy installation
Wayne Reineke
2025-05-22 11:46:59
I used this for the valve to my humidifier that was in need of replacement. Works great would recommend.,
D. Martin
2025-05-01 18:35:31
We recently switched over to a heat pump and it's suggestion was to use the hot water feed due to the lower temps (works great BTW) so I needed another "tap". I may replace it some day but the 40 year old one on the cold water pipe is still there with no issues. The biggest mistake you can do is to screw the tap in too far. Screw in the tap a turn or so and unscrew, repeat. When you get water when you unscrew, you have probably gone far enough. You still have enough taper on the tap to "turn off the water" with a GENTLE twist. No brainer, cheap and quick.
John
2025-04-24 15:52:55
These pierce type valves are not the greatest to start with. They are often prone to leaking. I have the same issue with this one. It has a slight leak where the valve screws into the top bracket. It's a minor leak and it's installed outdoors so I'm not too upset but be mindful that it is not a matter of if these type of valves will fail, but when. If you have the space but not too handy, Cut the pipe and use a push to connect valve.
nick robinson
2025-04-09 10:37:20
worked as described
Jim
2024-11-19 13:28:54
No welding mess. Very easy to use.
Recommended Products
