Shopping Cart

Your cart is empty.

Your cart is empty.

EZ-FLO El Mustee 19F Utilatub 18-Gallon Floor-Mount Laundry/Utility Tub, 34 X 20 X 24 In, White

Free shipping on orders over $29.99

$99.00

$ 44 .99 $44.99

In Stock

About this item

  • The product is manufactured in United states
  • The product is highly durable and easy to use
  • Easy installation and easy handling
  • 24" x 20" x 14-3/8"
  • 18 Gallon bowl
  • 24" x 20" x 14-3/8"
  • 18 Gallon bowl
  • Includes integrally molded drain assembly, stopper, and mounting hardware
  • White finish


Product Description

This is a Mustee floor-mount laundry tub in the color white. It is produced with Mustee's proprietary structural thermoplastic resins and innovative cellular molding process creating extreme strength and durability with a 18 gallon capacity tub with a smooth surface. This laundry tub features leak-proof, integrally molded-in drain with stopper and a heavy gauge steel legs with adjustable levelers. Included is a large, self-draining back shelf with retainer curb that prohibits water run-off except into tub. Connects to standard 1-1/2" P or S trap.

From the Manufacturer

Mustee, E. L. 19F Laundry Tub


C. Grooms
2025-08-29 11:44:21
Not a whole lot to say other than the fact that it's a solid, functional laundry tub. Tub itself is high quality and free of blemishes/defects both to the tub and the molded drain basket.Was a little confused during unboxing when I removed the legs from the box. Only counted two and scratched my head looking for the other set. Turns out that they are packed in two sets of two stacked atop one another in the package in such a way that you might have to do a double take. Legs are a mid-gauge steel with a grey powder coat finish that appears adequate to withstand rusting for many years. The leg levelers are a thick plastic with 1/4" holes in the bottom for anchoring to the floor. I ended up leveling the tub in the location I wanted to install it, mocked up my plumbing connections, marked my holes, pulled the levelers from the legs, set the levelers in place with Tapcon screws, set the tub and legs back over the levelers, bolted everything back together and re-leveled. You could probably avoid this partial disassembly by using wedge anchors but I wasn't going to bust out my SDS drill for a laundry tub.This tub replaced a 40 year old tub that was a little larger than this new one, but the reduction in size frees up some space in the laundry room and looks better to boot.UPDATE 2/2/16: Had the sink for a couple months now and have found a small design flaw with it. The front legs have worked their way out of the retaining pockets on the sink a couple of times now, possibly due to temperature changes in the basement laundry room where it is located. This could be remedied by the manufacturer by adding a barb to each leg to prevent the legs from backing out. I am going to attempt to slightly bend the corners of each leg to maintain positive pressure against the frame of the tub after insertion. Not necessarily enough to warrant knocking off a star, but useful info for any potential buyers.
Customer
2025-06-25 19:32:35
Use it daily in the garage for dirty nasty garage stuff, it's held up very well no issues. Perfect for man cave or she shed
LG
2025-06-21 21:12:08
Sturdy. Easy to assemble. Great price
frugal shopper
2025-06-10 12:18:02
Earlier this year, I asked for a worm factory for my birthday so that I could make my own compost for gardening. My husband approved, and I have been vermi-composting. My red wigglers are multiplying. My European night crawlers are multiplying. My factory is getting crowded. So, I decided to try this laundry tub for living space for my night crawlers since these worms like to burrow down deeper into the soil than do the red wigglers. When the tub came, and my husband put it together, I was amazed at how sturdy it is. I can understand now why other reviewers use it for a multitude of things, to wash hands in their shops, to clean cooking utensils outdoors. This is a really nice tub! I plan to put a screen mesh over the drainage hole at the bottom so that worm tea can drain into a bucket below. Then I plan to fill up my tub with bedding material and food for my worms until the night crawlers multiply and outgrow this tub and I can put some of them into the garden where they can burrow down deeply into the earth. (I might use some of the worms for fishing too, if I can bring myself to do it after raising them, and I am unsure about that). I really like this tub. It obviously has many uses, and with the adjustable legs, leveling really is not a problem. And, it is sturdy enough that we're not going to mount it to the basement floor where I raise worms and make compost. Nice tub!
shelly
2025-05-10 14:34:14
The legs popping out of place during the install were a pain. Once installed and screwed to the floor it's great. I liked the plastic levelers, they keep the steel legs from contacting the damp concrete floor.
FuzzeeD
2025-04-21 13:38:04
I originally purchased this laundry tub to use while my kitchen was being remodeled. However, instead of installing it inside, I got the idea to put it outside on my deck. Since we are in the warm weather months, it came in very handy outside, I used the hose for water to wash anything, including my small dog. I just added a gallon of hot water from inside, and then the hose to rinse him off. My Yorkie is small, so washing him in the bath tub was exhausting, he kept running all around the tub, so this worked out for me very well. Washed all my garden tools, and bar b que utensils outside as needed. I'll bring it in for the colder months, and use it in my laundry room, or garage. I like the idea that I can move around to where I need it. I used a hook to secure it to my deck. It turn out to be a great buy.
Jeremy Mahowald
2025-01-31 14:55:05
As plastic laundry tubs go, this one is top notch in quality and appearance. I searched the home improvement stores and they are cheaper versions, this one has metal legs. This Mustee tub is a must have in a laundry room. The pre-drilled faucet holes are 4" apart, made for a bathroom fixture. I wanted a higher neck swivel faucet and a sprayer, so I put in a single handle kitchen faucet in one hole with a sprayer on the right side. I had to make the hole a little larger to accomodate a kitchen faucet, so I used the Neiko titanium step bit to do that which made that a piece of cake to do (also bought on amazon). Of course, you can just buy a bathroom or laundry tub fixture and you won't have to do any of that, depending on what you want. It does not come with a drain kit, but I had a plumber install this anyway, which wasn't too expensive.I looked at getting a stainless steel laundry sink, but I'm glad I didn't spend the extra money. The Mustee laundry tub on amazon was a very good value, and I'm very satisfied with my purchase.
mongoose
2025-01-03 11:19:32
Well designed all the parts were in the box and fit perfectly. I needed a new sink in my barn and this one does the job just fine. Easy install, lightweight, composite (never rust) sink.
Shawn
2024-12-13 13:50:13
I've been using this for just about a year now. For the price it's probably the sturdiest laundry tubs available. In a previous house I had installed a cheaper laundry tub and regretted it.The only think I don't care for is the built in faucet holes as I used a wall mounted faucet. I covered the faucet holes with a piece of puck board and silicone.It's great for cleaning up after home brewing.
Recommended Products