Your cart is empty.
Your cart is empty.Mark
2025-08-28 16:46:03
My grandson's destroyed these bushings in the front shocks of the 49cc China Atv and since I could not find 9.5" shocks, I desided to replace the bushings with theses. Exactly what I needed.
mikes_garage
2025-08-18 21:36:24
They were just what I needed
Frank A.
2025-08-13 17:07:06
The bushing is not 12mm, but 12.4, which causes the busing to move around like a toilet paper role. Completely worthless on a 12 shock stud.
charles brigmond
2025-05-09 15:04:59
wrong size however that's on me. Used on another project that turned out okay.
Drago Black
2025-05-05 11:30:19
they fit into the strut but the bushing wiggles and the bushing core is only 1.7mm/0.06in thick. the originals on my struts held tight and the core cylinder was 3mm/0.12in thickUpdate: i ended up returning them for safety reasons.if you are looking for the bigger size, look up "hourglass bushings"
Alex De Jesus
2025-04-23 16:20:34
I have to return this because the outside diameter is not 24mm it only measures 22mm so its loose when you mount in on the shock
Howard
2025-02-02 11:51:40
Â
rab
2024-12-21 12:32:02
Replaced shock bushes
Customer
2024-11-30 10:38:47
Stated dimensions are not accurate. Undersized. Not happy with purchase but needed something until a better quality part can be sourced.
Bultaco Sherpa
2024-11-15 13:28:20
Excellent bushes. You will need a hydraulic press ideally to install them.
Recommended Products