Your cart is empty.
Your cart is empty.Product Description
Type:
Ford Brake Clutch Pedal Assembly
Material:
Aluminum and Plastics
Part Number：
Replace F3TZ2455A, F3TZ-2455-A
Fitment:
- For 1992-1996 Ford F150
- For 1992-1997 Ford F250 /F350 （M/T Only）
- For 1992-1996 Ford Bronco
**Manual Transmissions Only**
What You Get：
- 1X Brake Clutch Pedal Bracket Assembly
- 2X Additional Rubber Pads for Replacement
Provides a Real Foot Feel：
- Rubber Anti-slip Pads-- Increase Friction and Enhance Foot Feel
- Steel Springs--Flexible, Quickly return
- Reliable and Comfortable Operating Experience
brennen p
September 5, 2025
As you can see in the pics I had to break out the grinder and remove a ton of material. The top mounting bracket was welded on incorrectly, there was way too much of an extra material not letting in the box fit. As well too much material around the mounting bracket for the clutch master. I also had to drill out the slots for the vertical 10mm bolts as the slots were not lining up with the bolt holes, and hammer the back side of the box and the firewall to allow this box to fit. All in all, very poorly made.This job should have been an hour tops, but more like 30-45 minutes. I spent 4 hours going back and forth trying to make this work.I would not but this part of you are in a time crunch, you will need time to pull it out of the box and inspect it with your old part and send back if needed.Next time, I will just buy the clutch lever to the clutch master, since that was my problem, the teeth had worn off and it was just slipping on the spline. Which brings me to another negative of this part. The lever does not have teeth to mate with the spline, you’re just tightening the nut in hopes it olds, of which I have little confidence. I expect I’ll be removing this box and replacing it with a new OEM or a good used one.
Kindle Customer
August 4, 2025
The product was like the oem part with fit and finish. It went into the same spot with zero issues and has worked flawlessly so far.
Andrew alexander
August 1, 2025
Did not fit a 1995 f350 bolt holes did not line up well at all. required modifications to fit!
Gina K
April 6, 2025
The lengths of the pedals don't match like factory pedals do. The steel is very thin and flimsy; being able to squeeze them enough to make them overlap with one hand illustrates how much so. It is a safety concern and I will not install these on my truck.
Marcus M
February 26, 2025
I got this as a replacement for my 2002 F-350 as my existing pedal assembly has a worn pivot bushing and squeaks pretty good.First impressions of this is that the cast parts seem to be of decent quality and material. The pedal is steel with well welded parts. It should last a decently long time.This assembly also includes mounting bolts which is a nice touch. I haven't installed this yet, but visually, it looks identical to what's currently in my truck.
Thomas Kitz
February 20, 2025
I'm using this clutch pedal to retrofit my van with a manual transmission. This pedal is constructed well and fit my project perfectly. The moving parts on this pedal are machined well and work properly. This was a real time saver enabling me to finish my project in a day instead of modifying the original or trying to find a used one at the junk yard. I recommend this product for anyone that needs to replace there original assembly or someone like me doing the manual transmission swap.
Recommended Products