Shopping Cart

Your cart is empty.

Your cart is empty.

Face Mill Cutter Holder EMRW 6R 63-22+R8-FMB22-7/16+RPMT1204 Hard Alloy Blade+8mm Spanner+T15 Spanner, Used for Fough Machining of The Workpiece on The Milling Machine.

5.0 (9) Write Review
Free shipping on orders over $29.99

$36.99

$ 17 .99 $17.99

In Stock

1.Size:Emrw 6r50-22(1.96 Inch)


About this item

  • The milling cutter disk has the advantages of cutting labor and can mill the step surface. During milling, the stress points are along the direction of rotation of the milling cutter, and the downward force is small, and the product is not easy to deform when milling thin strip products.
  • Hardening and hardening High-precision shock resistance, good permeability, resistance to multiple impacts, good low-temperature impact toughness, sturdiness and durability, which can increase the service life and shock resistance of the cutter head.
  • The all-steel cutter body of the steel milling cutter is your savior for the main shaft, allowing you to reduce the load on the processing of the load.
  • Strict wire jointing, strong compression force, screw offset tightening design, so that the blade position groove and the blade closely fit together, the rigidity is enhanced, and the processing effect is good.
  • High-hardness treatment Strong and durable, the surface of the cutter head is treated with a new thin coating treatment liquid for high-hardness treatment, and has good acid resistance.


Product Description

EMRW 63MM

EMRW 63MM

This holder is suitable for use on R8 milling machines.

  • Equipped with a milling tool holder with a diameter of 63MM
  • 4PCS carbide milling inserts
  • Also comes with an 8mm hex key

It can be directly installed on the machine when you get it in your hand, suitable for plane processing, large feed, and improve processing efficiency.

EMRW 50MM

About the tool holder

  • Model：EMRW 6R63-22
  • Diameter：63MM
  • Material：40CRMO Steel
  • Wrench size: T15

About the Face Mill Arbor

  • Model：R8-FMB22-7/16
  • Material：40CRMO Steel
  • Hardness：52HRC
  • Screw size：M10
  • Wrench size：8mm
RPMT1204

About the carbide inserts

Model：RPMT1204

Inserts quantity：4PCS

Material：Carbide with PVD coating

For processing：Can be used for machining steel or stainless steel.

wrench

Model：L8

Format: Metric

Diameter: 8MM

Material: CR-V alloy steel

Product Information:

Hard steel sandblasted durable

Made of high-quality 40CRMO steel super-hard material, the surface is sandblasted with high-hardness treatment, and has good acid resistance and rust resistance.

Strictly fit and strong pressing force

Seiko manufacturing, screw fastening design, the fastening blade is closely connected with the groove, which enhances the rigidity and the processing effect is better.

High-strength shock-resistant, not easy to break

The arc-shaped design and high-quality material can effectively resist shock and shock, with strong resistance to multiple impacts, good toughness, and prevent the blade from collapsing due to uneven force.

Specifications:

  • Milling cutter head: 1PCS
  • Milling tool holder: 1PCS
  • Carbide insert: 4PCS
  • Wrench: T15=1PCS, L8=1PCS

shannon
2025-07-21 16:33:37
I think this is a good cutter for the money it really depends on what you are doing and how precise you want to be I only took .025” at a time because I did not buy any replacement inserts for it and then did a couple of.010” cuts and you can see the finish was not too bad I did not even look to see about runout on this
David L. Parnell
2025-07-17 16:44:17
At this price: WOW...haven't cut with it yet but it looked like a very good R8 cutter. Haven't chucked it into a spindle and checked it with an indicator but it looked like an "incredible" tooling product. Looked like excellent machining and grinding on the finished surfaces...well packaged. Must be an introductory marketing test otherwise it is an exceptional value.
PCO
2025-06-07 16:24:43
great cutter, inserts not so much
T.Hoffman
2025-05-31 18:20:23
I had to make a finish cut on a vblock for class today to improve my perpendicularity one one side. I decided to use my new face mill instead of one of the school ones. It did a great job with a beautiful finish shine!
nosoup4u
2025-05-06 17:22:07
Good news is the correct inserts were shipped and fit great. The head itself is super nice, seems very high quality. Also fit on the spindle perfectly.Bad news, the drawbar threads in the R8 spindle are drilled off center. The drawbar catches about 2 threads then locks up solidly. The drawbar is perfect and I use it all the time on everything. Only conclusion is they were drilled off-center.As usuall Amazon is most excellant and sending me another in exchange. Will update the results. Fingers crossed as I really want this to work.
Hunter Walker
2025-04-21 17:46:37
Does really well, with no complaints or issues so far. I've ran .15" on steel at 15 ipm and it performed really well.
sk1649g
2025-04-11 12:47:06
Missing parts, the arbor is oversized and the seller doesnt support the product. After i turned the arbor down to fit the shell mill, i started to assemble it and noticed the shorted me an insert clamp and insert clamp screw. They wont semd those parts, they want me to exchange it for another one. If they have no QA and their packing line isnt paying attention, why would i want to gamble with another one from them. I should have expected it, knowing where these parts came from.
shawn brown
2025-02-04 12:39:40
This mill cutter works great and for a great price.
Javier
2025-02-01 12:00:44
Se ve de muy buena calidad y a un precio inmejorable aquí en México,