Your cart is empty.
Your cart is empty. Ceiling fan have wobble problem when operate due to irregularity in blades or blade holders. improper assembly in mounting system may cause some additional problem, bearings crooked. The following procedure is strongly recommended by us from our past experience:
1 Make sure all blades are firmly screwed into the blade holder
2 Make sure all blades are firmly secured to the flywheel and check pitch of blade holders, all must be the same.
3 look up the fan from below, check and sure no blade holders are bent and no blades are out of position. Make a correction by gently bending the blade, holder back into position
4 use a household yardstick blade tracking can be checked, put the yard stick up against the ceiling vertically and even with the outside leading edge of a blade. Note the edge of the blade to the ceiling distance, carefully turn the blades slowly to check the remained. If blade is not in alignment, the blade holder may be gently bent up or down to be in line with the other blades.
If by following all the steps and problern is not sloved, use balancing Kit and follow the procedure
1. Put the clip between the blade holder and the blade tip at the trailing edge of the blade, for testing each fan blade.
2. After find the unbalance blade , move the clip inward and outward and then turn on the fan to confirm the best area.
3. Remove the clip and install a balancing weight to the top of the blade along the centerline near the position.
Material:
Balancing clip: TPR plastic
Self-adhesive balance weight: metal
Color and size: as the picture shown
Package includes: 4 x TPR plastic balancing clip 8 x Self-adhesive 5G metal weight
Warm Tips:
Please allow slight deviation due to manual measure
Please allow slight chromatic aberration due to different monitor
Stay away from rotating fan blades, as there may be a risk of injury!
Eddie Asbill
2025-08-29 13:54:37
Product arrived on time. Solved problem.
Kaye
2025-08-27 13:26:48
These work as described. Very good instructions and my ceiling fan has no more wabble or noise.
Diana Tallon
2025-07-19 13:47:44
Patio chairs.
Mehran S.
2025-06-04 13:25:00
I can honestly say I have spent hours trying to balance the fan to stop the wobbling and only have been able to reduce it by maybe 50%. I’ve taken every approach, including the instruction that came with it and videos that was available on line.
Jeffrey McGuire
2025-06-01 09:18:24
The process was fairly easy. The clips were a little hard to snap on. I balanced two fans.
Renee Camacho
2025-03-06 15:06:15
Did the job!
goat8485
2025-02-08 12:11:22
I had a ceiling fan that wobbled like crazy, especially at higher speeds. It made me nervous and the sound drove me nuts. I ordered this kit in hopes I could balance the fan and avoid replacing it.The clips make finding the right place for the weights pretty easy. Finally I have no more wobbling fan!
Matt M.
2024-11-12 12:42:19
It just works, these counterweights are perfect for balancing your fan blades! I rated a 4 star on adhesion as I will know better in the future that the weights stay put
Recommended Products
$125.00
$ 60 .99 $60.99