Your cart is empty.
Your cart is empty.Product Description
Cooling the Heat, decrease about 50℉ in temperature
The misting system produce water mist, which absorb the heat from the outdoor surrounding in hot summer, and provides a cooling outdoor areas, cools the surrounding air temperatures 10℃ to 20℃ or 50℉ to 68℉.
Good sealing
High quality manufacturing technology, the interface joint adopts 12 thickness steel sheet, the connection is firm, does not fall off and does not leak.
Removable Nozzle
Choose our products, can achieve a variety of uses, so that a wide range of applications. You can implement all kinds of ideas
Mist Watering Cover More Area
Watering by misting can cover a more large area than traditional watering, increasing humidity effectively and reducing dust particles.
Easy to install, It only takes you ten minutes
Easy to Install, It Only Takes You Ten Minutes
1.Cut out the pipe to get the size you want.
2.Turn the mister into a T Joint.
3.Stitch the water pipes together with T Joint.
4.Please assemble as shown in the figure above.
5.Use the cable ties to hang the misting ring on the fan.
6.Connect the threaded joint to the faucet.
Adri
2025-09-02 13:08:54
This is worth every penny! During the summer we used this a lot. It was super easy to install and boy was there a lot !! We put it in out gazebo and our patio tree it blends easily and quick to install.
noodle
2025-08-04 11:02:23
To cool a larger area, I purchased this kit and a 30" industrial pedestal fan. The combination is a knockout - there is mist swirling around the whole area and cooling everything off as it evaporates in the breeze. To ensure the motor doesn't get wet, I kept all mist nozzles around the perimeter, shooting inward and a little forward downwind. Measuring the lines is easy - just lay the nozzles where they're needed and line up the tube between them, then cut to length. Any excess tube becomes extra intake to reach back to the hose or spigot. I recommend attaching each nozzle with 2 small zipties on a bigger fan - just 1 leaves too much room for vibration.
Alan
2025-07-10 11:19:24
This worked ok attached to a filter and garden hose. However, with all the misters, it's just too much mist, even at the lowest setting. It makes everything wet.
Customer
2025-06-02 17:26:20
The media could not be loaded.
Michelle Jones
2025-05-24 13:03:13
The media could not be loaded.
J. Kirk
2025-05-19 12:03:40
I installed on a brand new commercial fan and turned on the fan and the water. There was more water in the floor than was misting. The fittingd are cheap and do not work at all. I have installed these types of fittings many times, I worked at at Hardware store and we sold this style with no problems ever. Looking at the fittings in this kit, they have no sealing internally except for the gripping teeth. All others do have the teeth along with an o ring for sealing purposes. I wasted my money and I hope nobody else will. DO NOT BUY!!!!
GinnyRN
2025-03-23 15:01:57
I was really impressed at how easily this cooler could be configured and installed. Love the versatility, so many different ways to use. It cools my patio by about 5 degrees in the summer heat.
C.J. Bergmen
2025-02-18 18:48:09
One of the nozzles was stripped and popped out once the water turned on making the whole system useless. They should provide extra parts in case this happens.
Recommended Products