Your cart is empty.
Your cart is empty.FelPro gaskets offer 100% vehicle sealing with applicationspecific materials to give you sealing solutions with the performance and durability professionals trust
Stephanie Brown
2025-08-31 12:21:49
All fits as described, no problem with
Gavin D. Mosher
2025-08-30 17:10:55
Perfect gasket set to seal the upper intake manifold on our odyssey
rbt.
2025-08-10 18:33:44
Good product, and the price is good
CaptainBasic
2025-07-25 11:47:15
This set was exactly what the doctor ordered. Came with everything I needed, including the throttle body gasket which was nice. Comparing to the OEM I took out it was identical in every way. So far 5K miles since install and no problems.
Jayaprakash Ravindran
2025-07-18 16:37:58
The fit was perfect. I did not use the throttle body gasket. The other 2 gaskets fit perfectly for the 07 Odyssey LX
Bill
2025-06-27 17:28:08
Fit with no issues. 2006 Honda Odyssey
CM
2025-05-11 11:48:52
Exact fit for my 05 accord 3.0l. Valve cover was seeping oil onto manifold and smoking. Seemed like a big scary job to replace but to me the savings is well worth the time to learn. Life lesson: DIY. Don't be afraid to try, watch videos, snap before pictures, buy tools, take your time, be methodical, and just go for it. With what I've saved in labor over many years I have amassed a wealth of reusuable tools. I also learned to adjust valves in the process. No more tick either.
Josedude
2025-05-10 16:51:00
Fel Pro intake plenum gaskets: I do not like Fel Pro gaskets; I have had several problems With them over the years, including this set. I purchased this set because my kid asked me to purchase the gaskets a few days before they wanted to change valve cover gaskets, and I could only get these in time. The gaskets were OK, except the end cap gaskets were cut incorrectly, and caused an intake vacuum leak that we had to track down and fix by reusing the old end cap gaskets. We had to purchase new end cap gaskets from Honda, which are not inexpensive, making this set quite expensive. I prefer, and should have purchased, Victor gaskets, with which I have never had a problem.
Benbo
2025-03-26 13:58:25
what can i say- its a gasket and it works, 5 months in and no leaks.
John Huynh
2025-03-10 10:51:22
Fel-Pro is quality replacements without the cost.
Canadian
2025-02-09 11:53:21
Successfully Installed the throttle body gasket and lower plenum gasket on 2007 Acura TL 3.2L model.Upper plenum gasket (the largest gasket that is located on the top cover section of the intake) did not fit on my 2007 model.I have informed Amazon about this issue.I have also asked them to specify this in the product notes.For anyone who is looking to purchase this set for a 2007 Acura TL 3.2L base model, be mindful that the top gasket did not fit on my vehicle.Consequently, I am also taking the liberty to specify this with all hopes that this information may help anyone with a 2007 Acura TL 3.2 Base Model avoid any compatibility issues with this set.Amazon promptly corrected my issue and has provided me with a credit for the gasket that did not fit. I have now purchased the correct OEM part from Acura and will be installing it shortly.Unfortunately, due to the upper gasket not fitting, I have to take another trip to my local professional installer to get the correct upper plenum gasket installed.The three star review is related more to the compatibility issue with my specific vehicle and the inconvenience I have encountered.With respect to long term quality of this product and durability, only time will tell.I am hoping that these gaskets will work without problems. I will be updating this review if any issue arises with respect to the quality of this set.
Recommended Products
