Your cart is empty.
Your cart is empty.FelPro gaskets offer 100% vehicle sealing with applicationspecific materials to give you sealing solutions with the performance and durability professionals trust
TTpilot
2025-09-03 21:16:25
My 97 Tahoe 5.7 Vortec with over 200,000 miles on it was randomly leaving pools of coolant when I parked it, so I consulted my mechanics. Told me it was likely the intake manifold. (Like one of the other reviewers, I had also had the original intake manifold gaskets replaced about five years earlier.) My engine oil cooler lines were leaking as well, and my driveway was becoming a mess. My shop wanted $933 to replace upper and lower manifold gaskets and oil cooler lines. Even though I'm no master mechanic (more like an unskilled pre-apprentice), I decided to save about $750 and try to do the job myself. A little intimidating at my level of experience.Bought these gaskets and they seemed very well-made. (Note: the box DID INCLUDE TWO, count 'em, TWO valve cover gaskets.) I used YouTube videos as a reference (1A Auto Parts has a very good collection of How To Fix Your Ancient Vortex-Powered GM Truck videos) and I actually managed to do a good job. The gaskets snapped right into place. Truck runs great now, not a drop of coolant or oil on my driveway any longer.I'd advise anyone without much mechanical experience (like me) to watch several YouTube videos on the subject first before attempting this. You will get a very good idea of what is involved, what problems to expect, and which tools you will need. I am glad that I decided to bite the bullet and do this myself. You can do it too!
Angela Matlock
2025-09-01 12:10:19
Perfect fit, all the gaskets needed to get the job done and way better than oem one.
Brinkley B. Pound
2025-08-24 14:32:39
My old lower intake manifold gasket (in the photo) was in terrible shape. I was leaking air and water into multiple cylinders. I ordered this set of gaskets. They seem much superior - more rigid (metal) center section and better gasket material around the cylinders. I used the entire set of gaskets and replaced the lower intake manifold gasket (shown in pictures before and after), the valve cover gaskets (2), the upper manifold gasket, the injector controller gasket, and the fuel line gaskets. My car runs great now. I was very impressed with the quality of the components and the fact that all of the gaskets (and gasket maker) were included in this package.
Rod Barnett
2025-08-21 17:20:44
As described and fast shipping. Order this set to get the beefed up intake gaskets. The gaskets on this Vortec engine had been replace a couple of years earlier and had failed again. This seems to be a weak point on these engines due to the distance between intake bolts. I read that these resolved this weak point. It's been a year and so far no problems
Phillip D. Johnson
2025-08-15 18:50:12
Only use the lower, because they will not sell it separate. The best fix for OEM product, and Have been a GM Parts Mgr for over forty years.Once you use this set, it will be the only set that can ever be used, due to the over sized water ports!Lasts about three years!
Exactly what I ordered, and delivered on time.
2025-08-14 13:53:31
Right part and delivered on time
DRACO A5OG
2025-07-29 17:17:13
I needed to do this dreaded repair as the OEM intake gasket failed at the typical front portion of the gasket and leaking coolant not only out side but worse inside the intake causing check engine under heavy load. Not Good. Also constant top offs. It was time. I chose this UPGRADED gasket as it is made of metal not paper, plastic or carbon fiber. It is definitely thicker so prepare and get extra RTV sealant as you would need to add a lot to make up for the thicker gasket. PRO-TIP, make absolutely sure you mark the distributor prior to removing, YES it and Valve covers need to be removed to take intake off. Oh yeah partial drain coolant so you do not flood the intake when your remove it. It took me 13+ hours so be prepared.
Danny Winter
2025-06-20 10:53:02
Quality
Lee
2025-05-20 12:35:13
Very good gaskets
Philip
2025-04-30 14:34:30
Good quality Item. Middle gaskets will be needed separately
Customer
2025-02-10 21:25:30
I bought these to replace Edelbrock Composite Gaskets that failed and came with an aftermarket Edelbrock Intake Manifold on Vortec Heads. These Fel-Pro Gaskets with the Metal Base and Viton Rubber, fit and perform perfectly. Worth every Penny! For my application I did not need the Single Valve Cover Gasket and upper Plenum gasket.
yvonne lagerwerf
2025-01-12 19:14:18
i can take photos i do not have a phone that does this
Customer
2024-12-15 17:34:12
Direct replacement for OEM parts.
Recommended Products
$25.08
$ 12 .99 $12.99
$25.55
$ 12 .99 $12.99