Shopping Cart

Your cart is empty.

Your cart is empty.

Fender Vintage-Style Guitar Fret Wire, Pack of 24

5.0 (10) Write Review
Free shipping on orders over $29.99

$13.52

$ 6 .99 $6.99

In Stock
  • 24 vintage-style pre-cut frets for guitar fingerboards
  • Pre-radiused to 5.25" for guitar fingerboards with 7.25” radius
  • Measurements: .039" tall, .084” wide, 2 13/16” long
  • Material: nickel-silver
  • Made in Japan


Refret or repair your instrument with the same fretwire that is used by Fender. Made of 18% nickel-silver alloy that delivers a clear tone, Fender fretwire is pre-cut and pre-radiused to the same specs used to build instruments in our factories. Vintage-style guitar fret wire pre-cut into 24 pieces and pre-radiused to 5.25" for guitar fingerboards with 7.25” radius.


Postbellum
2025-09-06 10:37:12
I have a friend who has built several guitars. I bought these for my tele project and hammered them in myself at home, clipped them and filed them. When he saw my neck to help me level it, he was highly impressed at the job I did. Not only that they were already radius'd, but they were very close to level already. Something you should know if you're new at fretting a guitar, they're cut for the lowest fret on the neck (wide) so you have to trim them. You should use a soft rubber mallet to install and a shot bag or rifle rest to cradle the neck. Don't hammer it with your head stock supporting the neck.
N1ZW Rob
2025-08-14 12:06:57
Frets wire came in flawless no scratches of any kind and fit my 1987-89 Epiphone by Gibson S-900 really very well. Granted most of these guitars take the medium or jumbo fret wire with the original Epiphone Bennder Bridge, intonation was something that could be a bothersome problem to achieve. Although this guitar can take two other bridges such as; • Schaller Floyd Rose and the • Steinberger KB.Over all I am happy with and for the price you can't beat it either.
Steve W.
2025-07-28 15:38:33
Did a refret for the first time with them on a neck that was totally unusable and now it plays very nicely. I am not a pro at guitar repair, but I did a lot of youtubing, and browsing forums and learned the basics and also ways to do things without spending a fortune on tools. The frets themselves are of good quality and having them pre cut and pre radiused was a big help.
N Davis
2025-06-10 18:18:07
Worked well, I bought this because I only needed a small quantity but don't buy into the name. Frets are frets and fender doesn't run a metal forge. You can get more efficient use out of sticks or rolls of frets as they don't force you to waste like these do. Also, think twice before buying this vintage, THIN gauge. I did it for someone who wanted to throw their worn strat back another couple decades, for which it did a great job
Steve Linz
2025-05-16 13:40:35
I found a standard coping saw cuts just a fine groove. And then I used super glue to lock it in. Little filing and sanding and its good. It is a soft metal easy to work with. Not like other wire I have used that is a hardened steel.
D. Dulin
2025-04-30 16:32:21
These fret's were perfect for my squite strat.They fit great, fileing takes a little time, but that's to be expected.Great fret's thogh.
Ian Finley
2025-04-01 12:36:59
OK, there's nothing wrong with these fret wires. But I do feel the need to let people know that if you're NOT a professional and for some reason get it into your head that just because you've installed locking tuners on your guitar and watched a bunch of youtube videos you're now thinking to yourself "Yeah I can replace the three worn out frets on this thing," that I hope you're doing it on a guitar you don't mind wrecking.I got it done, and from a distance you can't even tell the difference, but it is NOT an easy or simple tasks. If you don't have a fret press SPECIFICALLY MADE to get frets into the fingerboard, getting them in is NOT going to be easy (I improvised one out of a vice-grip, some rubber strips and a bunch of foam).If you're not a VERY handy person who has done this kind of thing before, and you care about your guitar, have a professional do this.
Ash
2025-02-26 15:46:10
The good stuff
alias_neo
2025-01-14 14:51:14
Fender Japanのストラト、57年モデルに装着しました。少し高くて大きいフレットを付けて弾きやすくしようとも考えましたが、指板のRがきつくてそれに合わせることが難しいと考え、Rの合うこちらの商品を選びました。すると、さすが純正で、Rがぴったり合うことでプラスチックのハンマーで少し叩くだけでしっかりはまりました。実際、すり合わせもしておらず、ビビりが無いか確認しながら、ビビりがあったらハンマーで軽く叩けばすぐに解決でした。もちろん、すり合わせをしたほうがよりシビアに弦高設定なども出来るのでしょうが、個人的にはすり合わせ無しでも、全く気にならない状態でした。ただ、このフレットに限らず自分で交換して大変なのは、ネックから飛び出る端の部分の加工。どうしてもチクチクしてしまうためルーターで少しずつ削りましたが、けっこうな手間ではあります。Rが合うストラトの方には、おすすめです。
naoty
2025-01-03 12:49:29
素材、フレットの曲がりも丁度よく、Fenderのギターのフレット交換は純正がいいと思いました。フレットのエッジも純正ならではで、安いものは私が所有するMexico製のストラトキャスターには合いませんでした。パーツも安価なので是非お勧めします。