Your cart is empty.
Your cart is empty.Product Description
AMG Advantages
Easy to connect wires
Festa AMG Radon Fans utilize Wago wire clamps to ensure simple and easy wiring. Just match the colors, insert the wire, and close the lever!
European Engineered motors
Our fans utilize motors made specifically for the harsh radon application. These motors are built to run 24/7/365 while encountering moisture and sediment. Each impeller is precision balanced and vibration free, enabling a quieter fan.
Compression molded housings
Our housings are made of glass-reinforced poly-resin, compression molded in Ohio, USA. Our materials never fade or change colors.
Extra Screws
Every fan comes with two extra screws to ensure you have the parts you need in the event you drop one in the dirt, grass or mulch.
Have a competitor's model on your home?
Reference this chart to find out which AMG model is a suitable replacement!
John M
2025-08-29 12:49:12
Size was easy fit to replace my old fan that got noisy. Wiring connections provided made hook up quick and easy. Mine is mounted outside, so sound is not a big factor, but this fan runs pretty quietly and I think would be OK in the basement too..
Lobsterasarchus
2025-08-23 17:01:04
Installed fine with no issues. It's plenty quiet and can barely be heard the next room over from behind the garage. No issues after a year or so.
Janny Lu
2025-08-13 15:05:29
Install was easy. Came with all electrical connectors.Very pleased!
DVfusion
2025-08-09 18:31:59
This is an exact match for my system. It fit right in and was easy to hook up. It’s been working perfectly for a couple months.
Jason R
2025-07-12 11:04:57
My old fan was starting to make an annoying vibration sound, as if someone was always outside with an electric weedwacker. The install was a pain, but that is not the fans fault, the way they installed the original pipes gave no flex. The actual fan was super easy to wire up with the preset connectors. Great replacement fan, dont wait until the unit stops working.
Boricua en Kansas
2025-07-05 14:18:17
I bought a slightly higher wattage, 90W vs. 65W, so it had almost the exact dimensions of my previous unit. Replacement was very easy and did not require any additional accessories. Instructions for wiring were very clear, it worked right away, and the noise was reasonable. I took a star off for not knowing durability, which is the most important quality of this type of product.
John Kaye
2025-06-26 16:32:58
Unit was sized correctly for my needs and installation was straight forward. Liked the unit construction. The electrical connectors were very easy to use and instructions were clear.
Azurelink
2025-04-06 13:37:52
Been doing its job for several years now. Powerful fan draws the radon out of our basement.
Michael
2025-04-05 12:15:25
44 db at a distance of 5 feet. I have it installed in our basement and it is at least 10 db quieter than either my furnace or my direct vent water heater.The numbers from the Airthings Corentium Home really tell the story! See pics.The build quality seems very good. I don’t know about longevity as only time will tell.New install but instructions are very clear.This draws air from an existing sump well with a weeping tile system around the perimeter of the house. The house is 1374 square feet with a fully finished basement.Believe the reviews!!
Jenniferkowpie
2025-03-03 14:52:29
We recently installed radon mitigation system from our sump pit using the Festa Radon AMG Maverick Radon Fan. Within 24 hours are radon on levels dropped 200 Bq/m3. The radon level has been below 30 Bq/m3 for 24 hours now. We are so pleased how effective this fan is!We followed the instructions choosing which model fan was appropriate for our home construction and size.When standing beside the fan, it is slightly noticeable, but as soon as the door to our utility room is closed, it is so quiet that you’re not even aware it is running and potentially saving your life. The installation of the fan itself was quite easy. We would definitely recommend this product.
Customer
2025-02-22 12:37:12
With a little bit of work I was able to reduce my Radon from a high of 718 P/m3 to an average closer to 50. I followed many do it yourself videos and I installed this fan in my attic with 4 inch piping. Combined with Airthings I am able to keep a close eye on the values.
Dorian
2025-02-15 16:57:12
The unit showed signs of prior use, so I returned it.
Recommended Products
$71.89
$ 29 .99 $29.99