Your cart is empty.
Your cart is empty.FGS Heavy Duty Saw Point Staples | 1/2" 12mm | 1,250 Pack | Universal Fit | T50 |
BILL
2025-09-01 15:32:51
Good alternative to brand name.
Kpsneed
2025-08-30 12:55:45
Works great attaching plastic to chicken pens for winter.
Peggy Lewis
2025-07-18 12:07:09
Fit stabler
JohnyJJ
2025-07-05 16:22:24
They do their job!
Carlos Stout
2025-07-03 17:20:25
I ordered these staples to finish recovering my pool table as the T50 staples I had been using were not doing the job. They would break when trying to pull a staple. and they were not driving completely into the hard wood. I found these staples to be more robust and reliable, and in the instances where I needed to pull a staple back out, I was able to remove them all, with a couple that broke, but I was easily able to finish removing with pliers. With the Arrow T50s I found my only option was to drive them beneath the surface, leaving part of the staple forever embedded in the wood.TL:DR - These are quality staples that I found to be superior to the Arrow T50's I used to use.
Stayupla8
2025-07-01 16:12:32
Used to hang thick, canvas artwork to long planks of Ash (hardwood) and they go in perfectly
Renee Tru
2025-03-07 13:39:25
I had a hard time finding the staples that go with my heavy duty stapler but these work and helped me repair furniture.
Isaac L.
2024-12-31 16:52:22
Don't waste your time - search for Arrow T-50 and just spend the extra pennies...I've been using T-50 and T-75 staplers for years for telco work, house maintenance (like putting up wire mesh around openings to keep birds, rats, and other varmints out of the attic and crawl space) and have used "generic" staples other than arrow when I had to or there was a good deal on a substantially similar product. If I'm doing a ton of work with a stapler I switch to a PT-50 which chambers the same staples as a T-50. (Same crow, same length's"The crown on these staples (1/2") was too wide to fit in the load gate, I had to get in my truck and go buy a pack of the same staple (1/2") This should have a crown of I believe 3/8" based on the arrow site.In any event - Arrow brand staples loaded fine and I finished putting up mesh to keep things from crawling under my new shed.Long story short - save time and just buy Arrow staples to avoid having to burn a $5.00 gallon of gas round trip to home depot, wast of a 3/4 ton truck to haul a few ounces of staples not to mention the waste of shipping them back and forth.Even if they'd fit the gun, when the arrived the rows of staples were almost all broken so I'd have been dealing with more misfeeds which would have been bad enough to write a review.
Nzer
2024-12-24 10:47:25
Didn't like pine keep jamming my sapler
Dunkem
2024-11-16 18:41:18
Not as advertised and not fit for purpose
Recommended Products
