Your cart is empty.
Your cart is empty.Product Description
Aopkeo, a new choice.
Cylinder/Tank Fill Station Adapter Valve
M18*1.5 and 5/8"-18UNF thread, max input pressure 4500psi. With 20 inches hose and 8mm female quick disconnect.
8mm Fill Nipple with Filter
7500psi Burst Disk
Double 6000psi Gauge
M10*1 Thread
Bleed Vent
The bleed vent, dopting a fully wrapped design, it provides effective protection during deflation.
- Bleed Vent
- Fully wrapped design
Two improvements
We are committed to continuously optimizing our products to provide you with a better user experience.
1. Increasing the size and upgrading the material of the connecting knob makes it easier to rotate the handwheel under high pressure.
2. Increase the size and shape of the handwheel for easier rotation and reduced overall height.
All pictures are real photos without any beautification. We hope to present you with the most authentic product.
- Increasing the size and upgrading the material.
- Increase the size and shape of the handwheel and reduced overall height.
- Real photos without any beautification.
Size and Weight
The size please the picture.
Inpu thread is M18*1.5 or 5/8"-18UNF.
Weight: 13.4oz
Hose Length: 20inches(51cm)
Comes with backup o-rings and gasket.
cgl28
2025-08-20 17:28:05
Just what I needed
JimE
2025-07-31 15:59:40
This is one of the best because they add an extra O-Ring. I Challenge anyone to find a 22mm x 17mm x 3mm O-ring in the United States (if you can find one with the correct hardness, please let me know where). You can find plenty of the 22mm x 17mm x 2.5mm O-Rings but not like the one that comes with any of these Valve. I have a box of various valves that I cannot use because of the O-rings. So when I first saw the extra O-Rings in the package that comes with the Valve I was sold. The valve works great and I have one for all of my bottles. Bye the way, all the dealers I spoke to will not sell you an extra package of the O-Rings. This is the one.
Chetjang
2025-06-23 12:46:57
I needed to replace the valve on a high-pressure 4500 PSI tank with multiple leaks. This regulator works perfectly; it is much better. There are no leaks, and it is well-made.
Refill cylinder works good
2025-06-07 11:35:37
It’s easy to refill air rifle just what I was looking for
MJ
2025-05-27 10:06:42
Pick this up to build my own portable refill tank for use in the field with a PCP rifle, add a 5 l tank to it works great my compressor's handles charging it very well this is the one to get!The main reason I chose this one and I'm glad I did is because there is the two separate lines The fill port to fill the tank and in the port you use to fill your gun.
Sandy
2025-01-20 11:27:47
This regulator does not seal to cylinder I purchased along with it. The supplied Oring is not large enough to properly seat and seal the two together.Now the regulator is leaking air out around the top valve when I attempt to charge an air pistol.
Ray marbles
2024-12-31 15:42:33
Week holds 4500 psi hasn’t dropped.top valve on and off little small definitely better than some of the other ones I’ve tried
Rogelio Hermosillo
2024-11-22 20:10:45
I like the quality and design, they are great additions to my PCP air rifles for recharging.
Recommended Products
$38.99
$ 17 .99 $17.99