Your cart is empty.
Your cart is empty.Product Description
Rubber Grip - conformable
The panel plywood lifter USE a durable, impact-resistant ABS handle.
The surface is non-slip and wear resistance.
Solid Construction - durable
The splint and the handle arm are made of high-strength aluminum alloy, while the joints are made of solid steel rods, which are strong and durable
High-grade non slip mat - non damage
High-grade gripping pads installed on the two splints can protect the surface of the material from damage or damage, while increasing friction to prevent falling.
Panel - adapt to the thickness of the board
The unique design of panel carrier allows the gripper to automatically adjust to different thicknesses up to 1" thick. The self-adjusting clamp holds materials tight as you lift. The clamp can hold up to two sheets or panels at once, accommodating loads of up to 200 pounds.
Heavy Duty-applicable materials
The most innovative tools for lifting and carrying all kinds of plywood, panels, sheets, and stabs. Use the gripper to grip and carry MDO or MDF panels, OSB, melamine, drywall , tabletops, sheep metal, and other sheet goods
Drywall - one hand carrying,easy on your back
You can carry heavy objects with one hand. No need to bend down to lift the material,all you have to do is just put the clip on the top edge of the material in the center of the board to lift. Convenient ! Save your back.
Specification:
Meterial: The clamp is made from aerospace grade aluminum, and the grip is made from ABS resistant polymer.
Color: Black + Silver
Clamp gap: 0"-1"
Load rating : up to 200lb
Item weight: 2.64 pounds
Perfect for the DIYer or Contractor in your Life ! √ Drywall √ Sheetrock√ Plywood√ MDO Panels√ MDF Panels√ Sheet Metal√ Slabs√ Table Tops√ Plastic etc. Remark : You can use this innovative tools to do many things that you will meet.
William H Bailey
2025-08-20 16:52:54
Worked perfectly for moving large rubber stall mats 3/4†6’x4’. Was able to use one in the middle to move the heavy mats by myself and with 2 people one on either end of the same edge moved downstairs with ease highly recommend.
Freud Dobler
2025-08-19 15:05:54
I bought this because I had to move some full melamine sheets. I tried to use it on a 3/4" sheet, which weighs a ton. I was able to lift the sheet, but I didn't trust myself to move it around with that single lifting point while keeping the corners of the board from scraping against the ground. So I enlisted one of my daughters to help me carry the sheet.I was thinking about returning this tool, but I then began using it to move the pieces of melamine after I broke down the sheets into 4x4' or 2x8' sections. I've also used it to move thinner sheets of wood, like 1/2" baltic birch. So it's a definitely good tool, but it won't automatically make it so you can lift 200 lbs with one arm. As long as you understand your own limits, it can be very useful when moving large pieces of wood by yourself.
Peter B.
2025-07-03 13:46:21
This tool makes carrying sheets of plywood without a helper not only possible but easy. It's very sturdy, being built out of aluminum and (I believe) the handle is steel. The only reason I'm giving it 4 instead of 5 stars is because the aluminum part is obviously cut from a large sheet and has not been deburred. This makes these edges very sharp and it wouldn't be too hard to cut yourself. I put a sanding wheel on one of those little artistic dremel tool things and ground down the edges. If the manufacturer did it before assembly, they could just use an angle or bench grinder. Overall a good tool with only a small oversight. You should wear gloves anyways when you're handling large sheets of plywood :-)
Customer
2025-06-01 11:48:51
At first seeing these devices at another website I was a bit skeptical of the design. So after purchasing one and using it to move 14 sheets of 10ft X 1/2 sheetrock this morning made me a believer in these tools. The gripping faces of these tools is quite similar to rough roof shingle. There was a previous review of this cracking sheets of sheetrock, this was not my experience. As a matter of fact, the bottom sheet had a bubble in the middle of the sheet from where the heavy paper (the side that faces the wall studs) on the back of the sheet. This tool didn't deteriorate the condition of the sheet any worse than when I started. It left no bite marks on any of the sheets lifted today.My experience/advice to anyone using this tool is make absolutely certain you have strong lower back, and strong core muscles, lift with your legs, and know your limitations. The manufacturer didn't skimp on the heft of materials used as it should be. Lifting a 10ft sheet of sheetrock didn't make my hand sore, but my legs felt it though. The comfort of the handle makes lifting sheet goods quite painless. This review is just another reason why these tools have 4.5 star rating...Nice tool!
Kurt P.
2025-05-06 17:20:40
I've used this a couple times and I like it. I have another couple that you put under the panels and lift them, but this works well also and is handy in situations where the other is not.
Utilitarian Dog Lover
2025-04-29 17:36:36
I had to move 30 sheets of various drywall panels 50 yards from the parking lot to my door. The 5/8" panels were not easy to move alone, but this was the only panel carrier that made it possible for me. I also have the type of carrier that carries the panel from the bottom edge, but this one (surprisingly) is much easier. The panels did not slip, were not damaged, and the tool seems quite sturdy.
Jeff Reid
2025-04-21 14:54:14
I like how heavy duty it’s built. Very user-friendly ease of use. This thing will make my back very happy!
David Inglish
2025-04-09 11:27:53
Just had a chance to try it to move around some plywood and drywall; although the 3/4" plywood was heavy, this worked well. Most of the time on the drywall, however, it cracked the drywall even when gingerly trying to lift it.
Ferrer
2025-03-23 20:50:33
Es una herramienta bien diseñada, robusta y facilita mucho pero mucho las maniobras del material. Al principio pensé que era algo caro, pero ya teniéndolo veo que si es una buena inversión. Lo recomiendo mucho.
Davidoo
2025-03-13 17:03:23
For easier and safer way to move sheet goods
Victor Hugo Sánchez Vidales
2025-01-19 11:22:21
Llego sucia con aspecto de haber si do usada la caja esta roja y no por el envio, se nota que asà estaba,los materiales de la empuñadura son de baja calidad llenos de rebabas incluso la etiqueta de la marca es mala. No es un producto muy prolijo y no es que lo necesite , parece fuerte y funcional . Veremos que tanto aguanta
John
2024-12-26 13:17:03
I don't move plywood sheets very often , but when I do I find this really useful. A sheet of 18mm ply or 18mm mdf Can be really heavy and this makes it much easier and is safer for my back.
Jonathan Malaihollo
2024-12-25 12:58:32
It feels good and sturdy in the hand with robust construction. Very simple to use and helps lift and move large sheets on your own. A must have for a woodworker!
Recommended Products
$50.00
$ 21 .99 $21.99