Your cart is empty.
Your cart is empty.Product Description
MFP
2025-08-23 16:21:04
Didn’t care for the gold colored pick guard on my Squire paranormal thin line telecaster. To me, it just looked a little cheesy. Unfortunately, replace the pick guards for those guitars are virtually impossible to find. Thought I’d give this a try. Worked perfectly. Looks great. Note of caution, the adhesion is very, very good. So take your time installing once the protective paper is off
HES
2025-08-14 16:23:53
Wanted a pickguard for this guitar but didn't want to have one custom made. Came across this and thought I'd give it a try.Item was listed for acoustic guitars but I came across reviews and pictures of using it on electric guitars. I had already made my template out of paper. I just used scissors to cut it out and used sandpaper around the edges for the finishing touch. I had read reviews so knew I could sand and these sheets were thicker than regular colors even though still thin.Just be aware if you use these to make your template outline on the color side of the paper! Don't use the back 3M side or your pickguard will not work, it will fit but on the OPPOSITE side you need. Also, it sticks well so make sure your placement is spot on the first time. Just take your time to do it right.Overall very pleased, relatively easy to do and saved myself some money and time.
TomBl
2025-08-06 12:13:20
This worked out quite well. I didn't have the problem of no adhesive at the edges like some other reviews mentioned. I cut it using my kitchen scissors. The only negative is that when I lightly sanded the edges it became fuzzy in one area. But only in one area. So it seems that the material or texture inside maybe is a bit inconsistent. But that's really just a minor complaint. It looks and feels great. And it seems quite a bit less expensive than most other sheets I found on Amazon. The thickness (including backing paper) measured at 0.028" or 1/32".
Sarah E Ehly
2025-07-23 12:11:00
I needed a custom pickguard for this Lava Me Play guitar that has an unusual sound hole design and white finish (shows every scratch unfortunately). This was the perfect solution. The sheet came within one day and was easy to position and cut with scissors. Very sticky so I made sure to take my time placing it down, but it was easy and already is protecting the guitar from my nails and picks. My only complaint is that the plastic on the front is not lined up completely with the backing leaving about a centimeter on the top that I could have cut off but I didn't realize it until after I laid it down. You can barely see it and it is not worth removing and starting over.
J. Krewson
2025-07-06 21:22:33
Sometimes you get lucky with a foreign product and its cheap and great. This pickguard material- you get what you pay for. It’s thin and looks printed (I got the tortoise).Don’t expect any transparency on an acoustic guitar- the lighter parts of the design show up. Its opaque.Good points: easy to cut with sharp scissors, nice 3M backing.So overall not horrible but I wouldn’t buy it again.
Ron
2025-06-27 17:18:57
Had high hopes for this given reviews & fairly decent looking photos of the opaque options, but unfortunately the transparent pickguard sheet was ultimately worthless. It has a bumpy texture to the adhesive side, which is incredibly apparent against a dark finish. Aside from the texture, it's not clear/transparent--it has more of a milky/cloudy plastic look, not at all as pictured, which appears to be closer to a glass transparency. Had to rip this off and throw it away, absolute waste of time/money.
MICHAEL POLK
2025-06-15 16:04:16
I didn't have a pick guard on my new guitar and didn't want to look at scratches. This work fine and can be cut with a good pair of scissors.
Rogue
2025-06-07 11:39:20
I was not happy with the cheap construction of this product it peels apart if you sneeze at it wrong
MFP
2025-05-19 11:18:00
Didn’t care for the gold colored pick guard on my Squire paranormal thin line telecaster. To me, it just looked a little cheesy. Unfortunately, replace the pick guards for those guitars are virtually impossible to find. Thought I’d give this a try. Worked perfectly. Looks great. Note of caution, the adhesion is very, very good. So take your time installing once the protective paper is off
HES
2025-05-03 11:02:34
Wanted a pickguard for this guitar but didn't want to have one custom made. Came across this and thought I'd give it a try.Item was listed for acoustic guitars but I came across reviews and pictures of using it on electric guitars. I had already made my template out of paper. I just used scissors to cut it out and used sandpaper around the edges for the finishing touch. I had read reviews so knew I could sand and these sheets were thicker than regular colors even though still thin.Just be aware if you use these to make your template outline on the color side of the paper! Don't use the back 3M side or your pickguard will not work, it will fit but on the OPPOSITE side you need. Also, it sticks well so make sure your placement is spot on the first time. Just take your time to do it right.Overall very pleased, relatively easy to do and saved myself some money and time.
TomBl
2025-04-22 12:10:11
This worked out quite well. I didn't have the problem of no adhesive at the edges like some other reviews mentioned. I cut it using my kitchen scissors. The only negative is that when I lightly sanded the edges it became fuzzy in one area. But only in one area. So it seems that the material or texture inside maybe is a bit inconsistent. But that's really just a minor complaint. It looks and feels great. And it seems quite a bit less expensive than most other sheets I found on Amazon. The thickness (including backing paper) measured at 0.028" or 1/32".
Sarah E Ehly
2025-04-13 15:43:41
I needed a custom pickguard for this Lava Me Play guitar that has an unusual sound hole design and white finish (shows every scratch unfortunately). This was the perfect solution. The sheet came within one day and was easy to position and cut with scissors. Very sticky so I made sure to take my time placing it down, but it was easy and already is protecting the guitar from my nails and picks. My only complaint is that the plastic on the front is not lined up completely with the backing leaving about a centimeter on the top that I could have cut off but I didn't realize it until after I laid it down. You can barely see it and it is not worth removing and starting over.
J. Krewson
2025-04-07 15:29:21
Sometimes you get lucky with a foreign product and its cheap and great. This pickguard material- you get what you pay for. It’s thin and looks printed (I got the tortoise).Don’t expect any transparency on an acoustic guitar- the lighter parts of the design show up. Its opaque.Good points: easy to cut with sharp scissors, nice 3M backing.So overall not horrible but I wouldn’t buy it again.
Ron
2025-04-03 18:36:13
Had high hopes for this given reviews & fairly decent looking photos of the opaque options, but unfortunately the transparent pickguard sheet was ultimately worthless. It has a bumpy texture to the adhesive side, which is incredibly apparent against a dark finish. Aside from the texture, it's not clear/transparent--it has more of a milky/cloudy plastic look, not at all as pictured, which appears to be closer to a glass transparency. Had to rip this off and throw it away, absolute waste of time/money.
MICHAEL POLK
2025-03-23 12:33:01
I didn't have a pick guard on my new guitar and didn't want to look at scratches. This work fine and can be cut with a good pair of scissors.
Rogue
2025-03-12 17:42:05
I was not happy with the cheap construction of this product it peels apart if you sneeze at it wrong
victor vargas betanzos
2025-03-04 15:56:09
DHL NO MANEJO BIEN EL PRODUCTO Y LLEGO QUEBRADO O DOBLADO Y YA NO SIRVIO
Antonio
2025-02-23 11:23:06
Buen producto
Carlos
2025-02-20 18:27:30
Nice quality but I wasnt impressed with the colour, it didn't match the guitar like I thought. This is not reflective, it's just a print but all in all not bad.
Michael
2025-01-30 11:32:50
Avant de le poser couper 2mm de bord sur ça largeur car sinon se verra une démarcation
Azel Ovitch
2025-01-25 11:08:15
Faire un Golpeador pour ma guitare classique.Le produit a une bonne épaisseur.Va-t-il durer dans le temps est la nouvelle question.Facile à appliquer.Penser à faire un gabarit pour tracer le périmètre de la rosace.
victor vargas betanzos
2025-01-20 18:46:36
DHL NO MANEJO BIEN EL PRODUCTO Y LLEGO QUEBRADO O DOBLADO Y YA NO SIRVIO
Antonio
2025-01-13 13:09:33
Buen producto
Carlos
2025-01-05 17:20:42
Nice quality but I wasnt impressed with the colour, it didn't match the guitar like I thought. This is not reflective, it's just a print but all in all not bad.
Michael
2024-12-31 13:41:46
Avant de le poser couper 2mm de bord sur ça largeur car sinon se verra une démarcation
Azel Ovitch
2024-12-30 17:01:02
Faire un Golpeador pour ma guitare classique.Le produit a une bonne épaisseur.Va-t-il durer dans le temps est la nouvelle question.Facile à appliquer.Penser à faire un gabarit pour tracer le périmètre de la rosace.
Recommended Products
$27.35
$ 12 .99 $12.99