Your cart is empty.
Your cart is empty.Flexzilla is a revolutionary hose featuring a Flexible Hybrid Polymer material that redefines flexibility. This engineered hybrid polymer material permits use in environments where general purpose PVC and rubber hose may become too stiff. Flexzilla hose characteristics offer zero memory allowing it to lay flat. It won’t work against you during operation and coils easily after use. Flexzilla offers extreme all-weather flexibility, even in subzero conditions, and is ideal in both hot and cold environments where tight radius bends are needed.
Seth C. Howard
2025-09-02 12:54:24
every flexilla product has been excellent . even grease hoses used for hydraulic testing ; excellent . air hose will be no different . 8ft for bench work , to prevent long entaglements . i LOVE hi flow fittings , but for impact tools , you need whip hose to keep fitting from damage , but well worth it !!! they flow excellent .
Nick
2025-08-29 10:39:23
Very flexible with well made fittings. Does not leak at all.
Newbie
2025-08-22 20:20:12
Worked perfect ,seems like pretty high quality hose high flow between my air compressor and my air reciever tank . highly recommend ðŸ‘ðŸ‘
Salvador Torres Jr.
2025-08-12 13:06:50
this was exactly what i needed, works well and has held about 100lbs of pressure for months now.. no issues.
Okiepoke
2025-08-08 17:22:32
Used for tail hose in 80 gal shop air comp. Works like a champ. Decent price and would buy again.
Silverback61
2025-07-24 09:40:47
So far, Holding up well. I have used this to connect from compressor hard line on one end to moisture filter/regulator on other end. Key for this is the swivel heads this whip has. Vendor shipped quick and they are good quality. You need at least one swivel end (this one has that) to make it a convenient connection to two hard lines. It works well for my application. The only other one I found out there in 3/4 inch had poor reviews from failing due to heat generated by air compressor. I decided to reduce 3/4 line out of compressor to 1/2 inch whip and bought a 1/2 regulator/air filter. My shop hard lines are 3/4 so from the 1/2 regulator I hard lined back from 1/2 to 3/4 inch. Still get plenty of air to my multiple port locations. Have had in place for couple months and no leaks yet.
Luvin Eire
2025-07-22 11:56:10
With a new and double the scfm (went from 15.1 to 31.2) compressor came the need to change out my feed line from the tank to the trap and to the wall. This is exactly what was needed to isolate any vibration while allowing maximum scfm. I added one at both ends from the tank to the trap and trap to the manifold on the wall that feeds everything else. This was exactly what was needed and like all my other Zilla products, top quality.
Tom M
2025-07-06 12:24:21
I've bought quite a few of these for inlet hoses for our shop air reels. This one was in service for a short period at 165psi before realizing one day that it looked like a balooned sausage ready to burst. The casing states 300psi, and I have always been very happy with flexilla hoses and components in the past so hopefully just a one time fluke in quality. Hopefully this doesn't become a trend with my other jumper hoses on my other reels, as I'm not looking forward to replacing them all, nor do I want an airline going boom in the shop to freak out all my techs.
Customer
2025-07-03 15:20:26
Très bonne qualité. Il resite bien depuis environ 3 ans. J’acheterais à nouveau
Mr. R. J. Fleckney
2025-06-01 17:42:02
Just as described, exactly what I wanted and great quality
KD
2025-05-23 14:05:51
I am using this a ‘jumper’ hose between my air compressor and the filter / regulator assembly. Compressor is at 150 psi and no leaks at all. The swivel end makes it easy to connect to the filter / regulator assembly. I have used other brands and the swivel end always ended up leaking air. This one does not!
Cam
2025-05-20 10:13:29
I love the feel of the hose, you can tell it’s made really well. The fittings on the hose are very nice and feel strong. It flexes really well and did exactly what I wanted it to.
RMF
2025-05-11 11:43:07
Very happy with the synthetic hose material and does not tangle or have a memory of curling. Good quality
Seth C. Howard
2025-04-02 20:29:41
every flexilla product has been excellent . even grease hoses used for hydraulic testing ; excellent . air hose will be no different . 8ft for bench work , to prevent long entaglements . i LOVE hi flow fittings , but for impact tools , you need whip hose to keep fitting from damage , but well worth it !!! they flow excellent .
Nick
2025-03-28 13:05:51
Very flexible with well made fittings. Does not leak at all.
Newbie
2025-03-05 11:42:13
Worked perfect ,seems like pretty high quality hose high flow between my air compressor and my air reciever tank . highly recommend ðŸ‘ðŸ‘
Salvador Torres Jr.
2025-03-01 10:30:40
this was exactly what i needed, works well and has held about 100lbs of pressure for months now.. no issues.
Okiepoke
2025-02-28 10:22:18
Used for tail hose in 80 gal shop air comp. Works like a champ. Decent price and would buy again.
Silverback61
2025-02-25 12:56:27
So far, Holding up well. I have used this to connect from compressor hard line on one end to moisture filter/regulator on other end. Key for this is the swivel heads this whip has. Vendor shipped quick and they are good quality. You need at least one swivel end (this one has that) to make it a convenient connection to two hard lines. It works well for my application. The only other one I found out there in 3/4 inch had poor reviews from failing due to heat generated by air compressor. I decided to reduce 3/4 line out of compressor to 1/2 inch whip and bought a 1/2 regulator/air filter. My shop hard lines are 3/4 so from the 1/2 regulator I hard lined back from 1/2 to 3/4 inch. Still get plenty of air to my multiple port locations. Have had in place for couple months and no leaks yet.
Luvin Eire
2025-02-22 11:59:03
With a new and double the scfm (went from 15.1 to 31.2) compressor came the need to change out my feed line from the tank to the trap and to the wall. This is exactly what was needed to isolate any vibration while allowing maximum scfm. I added one at both ends from the tank to the trap and trap to the manifold on the wall that feeds everything else. This was exactly what was needed and like all my other Zilla products, top quality.
Tom M
2025-02-18 14:47:19
I've bought quite a few of these for inlet hoses for our shop air reels. This one was in service for a short period at 165psi before realizing one day that it looked like a balooned sausage ready to burst. The casing states 300psi, and I have always been very happy with flexilla hoses and components in the past so hopefully just a one time fluke in quality. Hopefully this doesn't become a trend with my other jumper hoses on my other reels, as I'm not looking forward to replacing them all, nor do I want an airline going boom in the shop to freak out all my techs.
Customer
2025-01-26 16:05:12
Très bonne qualité. Il resite bien depuis environ 3 ans. J’acheterais à nouveau
Mr. R. J. Fleckney
2025-01-19 18:15:34
Just as described, exactly what I wanted and great quality
KD
2025-01-13 14:33:12
I am using this a ‘jumper’ hose between my air compressor and the filter / regulator assembly. Compressor is at 150 psi and no leaks at all. The swivel end makes it easy to connect to the filter / regulator assembly. I have used other brands and the swivel end always ended up leaking air. This one does not!
Cam
2025-01-07 14:45:14
I love the feel of the hose, you can tell it’s made really well. The fittings on the hose are very nice and feel strong. It flexes really well and did exactly what I wanted it to.
RMF
2024-12-28 12:29:03
Very happy with the synthetic hose material and does not tangle or have a memory of curling. Good quality
Recommended Products
$26.15
$ 11 .99 $11.99