Your cart is empty.
Your cart is empty.Product Description
This Fluke is the perfect test lead kit for todays electronics tests and designs. The kit includes precision electronic probes with multiple spring-loaded sharp tips to maximize contact with SMD test points. The kits also includes micro-grabbers and leads to enable fine SMD tests along with mini alligator clips, grabbers, and probes for virtually every electronics need. Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. From industrial electronic installation, maintenance and service, to calibration and quality control, Fluke tools help keep business and industry around the globe up and running.
From the Manufacturer
The TL81 kit consists of a quadfold nylon pouch containing many test leads
bibliobob
2025-09-04 18:26:37
After two years, I've found few circuits that couldn't be easily, quickly and securely accessed with just the components in this set. The exception was larger contacts in old equipment, which were easily addressed by adding these: .Everything in this kit is useful and very well designed; there's no filler or junk, and it alone is sufficient for almost everything I use a meter for. The silicone leads seemed unnecessary for my non-extreme environment, but their flexibility makes an amazing difference in their ability to access and stay attached to difficult connection points. And, unlike PVC leads, they are not likely to stiffen with age.CONTENTS * Two 4-ft test leads, shrouded right-angle male banana connector to stainless steel test probe; rated 1000v 10A * Two 1-meter modular test leads, shrouded right-angle male banana connector to straight shrouded male banana connector, 10A * Two female-female banana test lead coupler (enables you to use the 1-meter modular leads to extend the 4-ft leads) * Two of each of the following slide-on adapters that fit the test probe on the 4-ft leads _insulated alligator clip, 5A _IC probe (thin), 3A _insulation-piercing probe _shroud; leaves only the tip of the probe exposed * Two of each of the following attachments that fit the straight male banana plug on the 1m modular leads: _test probe _insulated alligator clip, 5A _bare spade lug _claw clip with 26mm lead, 5A _hook clip with 26mm lead, 5A * A high-quality nylon roll-up case with four translucent vinyl pockets to organize, carry, and protect the set. The top pocket, which holds the relatively-small test probe adapters for the 4-ft leads, has a Velcro closure, as does the case flap. It is compact and sized for this set, with no room for additions.
Fidel Fausto
2025-08-16 18:22:16
This fluke kit is a well constructed solid collection of test tips for automotive use purposes….Although, you’ll find this kit can be used for other applications ( I use it for testing non automotive electronic components and home applications)From leads extensions that can either attach to a DVM or a probe, alligator clip , test lead end or wire piercing ends ….Very versatile kitGood price too
Matty-J
2025-07-10 10:39:29
I'm an AutoTech installer for Geek Squad, so I use my DMM almost every day when I'm at work. This kit has been a boon for me.The piercing probes are easily the best thing about this kit. They let you test wires without having to hunt them down at the source and try to t-pin into them. And depending on the application they can be used to help with testing mocked up circuits. That being said, be aware they can only handle 60VDC at 5A. If you go any higher than that the needle in the probe will heat up and will melt the core, ruining the probe...ask me how I know. (I loved these probes so much I bought a second kit just to replace the probe I ruined).The wire leads are long, like really long. At around 5.3ft. They're a little too long for my liking so I use them as backup lead wires. But the rest of the accessories work with the shorter interchangeable lead wires I have been using on my DMM for a while.The alligator clips work VERY well, the teeth are very sharp and you can rest assured that when you clamp them properly to a surface, they're not going anywhere. I mostly use my meter to find horn wires, test polarities on ignition circuits and what not, and the two default tips I have on my meter are one of the piercing probes and one of the big alligator clips.And best of all it comes with it's own pouch with clear pockets. So you can easily take it on the go, or leave it unrolled in your tool box and see what's in each pocket without having to dig through it.If you work with electronics on a regular basis in the automotive industry, this kit WILL NOT let you down. It's 100% worth the extra money than some of the similar kits on Amazon. I've been very happy with this kit, I use it at some point every day I work. Just another reason to trust and love the Fluke brand.But again, just make sure you don't pump anything more than 5A through the probes or you will regret it!
Ron
2025-06-22 11:32:53
Fast shipping and the case is very nice.
cartoon lover
2025-05-31 21:13:35
This is my second set. These are the best really well made and extremely reliable. In a professional environment reliability and safety are paramount. Buuuut they are very pricey!!! Although, buying this set is way cheaper than buying individually. But yeah you lose a star for the price sorry.
Theodor Seuss Geisel
2025-05-05 11:55:45
I’ve ruined multiple sets of probes because I didn’t have the features that this has at hooking onto wires clamping on wires or probing them. It’s worth every penny.
Dave B
2025-04-18 17:28:30
Great set have really enjoyed using them so far
brahim brichen
2025-02-20 17:49:50
Ce kit rassemble tout ce dont un électronicien a besoin.Plusieurs pinces de connexions,cables et rallonges.Tout ça de superbe qualité.Merci Fluke!
Peluz
2025-02-04 11:17:02
Fantástico kit de cables(de silicona) con varias puntas, desprende calidad por todos los poros, se nota que es de Fluke, muy variado para todas las situaciones. Muy contento con la compra y el precio inmejorable.
Dimitri van der Heide
2024-12-01 14:33:20
Heel blij mee. En origineel
Alex
2024-11-20 15:18:06
Eigentlich ist nur ein Punkt wichtig: die QualitätFür fluke Verhältnisse finde ich die Verarbeitung des Kabels (TL224) teilweise etwas unsauber, ist aber nur optisch und schenkt die Funktionalität keinesfalls einDer Rest ist absolut top, da gibt's nichts auszusetzenIch bin echt froh dass ich dieses Set gefunden habe, es ist für Fluke Verhältnisse unfassbar günstig und es beinhaltet alles was ich brauche
Recommended Products
