Your cart is empty.
Your cart is empty.Front Bumper Lower Grille Trim Panel Compatible with 2015 2016 2017 Ford F-150 F150 Lower Grill Black Fitment: Compatible with 2015 2016 2017 Ford F-150 Enhance the look of your vehicle This front bumper Lower Grille Trim Panel is designed tough and made from the highest quality materials Designed for a direct, fit Factory direct pricing without middleman mark-ups Direct replacement for part #FL3Z17E810CA.Instruction is not included
BigMo12
2025-08-27 12:01:59
The hardest part was removing some of the old clips. Part arrived with new clips already installed. Just popped it into place and everything fit like a glove. Excellent solution to my issue
Anthony
2025-08-25 14:11:37
It fit almost perfectly on my 2016 f150, the problem I had was the other one need replaced because nose the front of my truck in a ditch and it bent the bottom metal of the bumper, braking the clips and slats where the license plate holder goes I couldn’t bend it back out perfectly so the two center clips won’t attach. But if the bumper was bent then they would and it hasn’t fallen off yet and it probably won’t.
Camila amoreli
2025-08-16 12:05:02
Great product , great seller !
Terri Johnson
2025-07-24 16:28:15
I installed this bumper trim and there are a couple of issues, in terms of quality.First, the product is NOT OEM (despite what it eludes to), which is particularly noticeable in that the material is thinner than the original OEM part. This means it will not be as structurally strong/durable as the original. Also, because it is thinner, the original License plate mount (which I reused) does not fit tightly. It is not as secure as it was when installed on the original trim. Instead, with this NON OEM trim, it is loose and slides down and will rattle on every bump in the road.Second, the metal clips are not made with quality spring steel. Thus on installation, the trim kept popping out. It did NOT stay securely fastened to the bumper in a couple places, because the metal clips bent in, instead of springing back to fasten. I had to replace several of the cheap clips by re-using several of the OEM original spring clips from the original trim, in order to get it to finally stay secured to the bumper.Next time, when this breaks, I will make sure to get a Genuine Ford OEM trim piece. This product was too much hassle to install and with the license plate rattle, as well, it doesn't warrant the potential savings, over a genuine OEM part.
Sarah Zizelman
2025-07-21 18:46:42
Seems ok as far as quality. But I don’t understand why these don’t fit a 2015 with a 5.0. Bumpers should be the same but they apparently are slightly different. I noticed on the factory one the bottom clips stick out longer. On this one the clips stick out all the same length.
Larry
2025-07-20 18:45:06
Truck
William Kangas
2025-06-22 14:12:38
Installation was easy.
S. Neumann
2025-06-02 20:41:27
I'm giving this a midpoint star review because A) the piece itself fits perfectly...but B) the clips render it useless. As others have said, KEEP THE ORIGINAL CLIPS from the factory piece and REUSE them. Seller could work on the clip problem and make it a 100% workable unit.
BigMo12
2025-03-30 11:15:11
The hardest part was removing some of the old clips. Part arrived with new clips already installed. Just popped it into place and everything fit like a glove. Excellent solution to my issue
Anthony
2025-03-04 14:46:35
It fit almost perfectly on my 2016 f150, the problem I had was the other one need replaced because nose the front of my truck in a ditch and it bent the bottom metal of the bumper, braking the clips and slats where the license plate holder goes I couldn’t bend it back out perfectly so the two center clips won’t attach. But if the bumper was bent then they would and it hasn’t fallen off yet and it probably won’t.
Camila amoreli
2025-02-28 19:44:02
Great product , great seller !
Terri Johnson
2025-02-09 11:09:57
I installed this bumper trim and there are a couple of issues, in terms of quality.First, the product is NOT OEM (despite what it eludes to), which is particularly noticeable in that the material is thinner than the original OEM part. This means it will not be as structurally strong/durable as the original. Also, because it is thinner, the original License plate mount (which I reused) does not fit tightly. It is not as secure as it was when installed on the original trim. Instead, with this NON OEM trim, it is loose and slides down and will rattle on every bump in the road.Second, the metal clips are not made with quality spring steel. Thus on installation, the trim kept popping out. It did NOT stay securely fastened to the bumper in a couple places, because the metal clips bent in, instead of springing back to fasten. I had to replace several of the cheap clips by re-using several of the OEM original spring clips from the original trim, in order to get it to finally stay secured to the bumper.Next time, when this breaks, I will make sure to get a Genuine Ford OEM trim piece. This product was too much hassle to install and with the license plate rattle, as well, it doesn't warrant the potential savings, over a genuine OEM part.
Sarah Zizelman
2025-01-23 15:29:11
Seems ok as far as quality. But I don’t understand why these don’t fit a 2015 with a 5.0. Bumpers should be the same but they apparently are slightly different. I noticed on the factory one the bottom clips stick out longer. On this one the clips stick out all the same length.
Larry
2025-01-21 18:06:57
Truck
William Kangas
2024-11-27 20:54:18
Installation was easy.
S. Neumann
2024-11-24 18:31:21
I'm giving this a midpoint star review because A) the piece itself fits perfectly...but B) the clips render it useless. As others have said, KEEP THE ORIGINAL CLIPS from the factory piece and REUSE them. Seller could work on the clip problem and make it a 100% workable unit.
Recommended Products
