Your cart is empty.
Your cart is empty.Product Description
Redesigned for Better Performance & Durability
Compatible Latch Hook for a Secure Fit
The “Pour” end of each spout, both Blitz and Mr. Yellow Cap, is designed with a latch hook for a secure cap fit. These spouts are virtually identical, allowing old gas can caps to work seamlessly. If you have existing caps, keep them—they are fully compatible with our spout design.
Upgraded Spout Design for Improved Fuel Flow
The original Blitz spout had a "self-venting" design but was still slow to pour. Mr. Yellow Cap spout is designed without it for better control. We recommend adding a vent on the back of your fuel can to improve airflow, allowing faster, smoother fuel transfer while reducing spills and overflows.
-
Marine Refueling
Ensures safe, quick refueling for boats and jet skis, keeping your family safe while having fun.
-
ATV & UTV Refueling
Keep your ATV and UTV fueled for off-road adventures with a safe and easy refueling solution.
-
Lawn & Garden Refuel
Easily refuel lawnmowers, trimmers, and chainsaws to keep your yard looking its best.
-
Car&Truck Refueling
Keep extra fuel on hand for your car or truck, ensuring you're always ready for the road.
-
Home & Workshop Use
Keep fuel ready for home projects, power tools, and emergency backup in your workshop or garage.
Reliable Fueling for Outdoor, Automotive, Marine, and Home Use – Always Be Ready for Any Adventure!
charles cosand
2025-08-13 13:14:02
The items arrived in two different shipments and both were packaged very well. The gas container is awesome with its features and eliminates the cumbersome workings of the spouts on most of the small container. The spouts I ordered didn't fit my containers because I didn't measure my openings on the old containers. I saw the name Blitz and figured they would work. Mine are the older containers and the new spouts didn't work. The new spouts are great and would have been awesome if I had measured my openings on the old containers. BE SURE TO MEASURE YOUR OPENINGS.
rowland
2025-08-03 11:34:03
works great no vent
L. B. Heller
2025-07-02 18:06:42
These have a lot of problems.-the locking ring didn't thread onto any of my various gas cans-the spout is not compatible with any of my locking rings, normally they have 4 plastic fins that allow them to work with almost any ring but on this spout the plastic fins are tiny and do not engage with the ring. I knew going in that the locking rings on replacements don't always match the threads, but I expected to at least be able to use the spouts. The spouts I own all interchange, but these don't work with anything.-there is no rubber gasket at the interface of the spout and the can-there is no vent, they included instructions on how to drill out a separate vent on the can, but did not include the inserts to install into the hole10 dollars each is a TERRIBLE value. They cheaped out on the plastic fins which ruins compatibility, and saves them a fraction of a cent on a product that already costs cents to make. Of course it doesn't come with a rubber gasket, that would double their cost of production from 10 cents to 20 cents. I assume the lack of a vent within the spout is a patent issue, but if it's not, shame on them for not including it on such an overpriced product. Total rip off.
Jesse L Mika
2025-05-26 19:00:48
They Fit and Work Perfect. I had the Same ones for years and they did start to crack on the screw on threds. So I ordered them again. But they held up for a long time. It is plastic so stress of the plastic does wear and tear and wear out. I like these so much I bought them again. As long as you have the correct gas can Jug. I did put a vent on mine to allow to transfer faster as well.
mmay
2025-03-03 20:56:04
The threads matched my Blitz one gallon can. However, the height of the collar was too great and it bottomed out at the top of the can before the spout and gasket made contact to seal. I took the collar and gently ground off about 3/16" of the base of the collar and voided a warranty or the possibility of a return. I'm very pleased to say that it did not matter. The spout will now thread fully with the altered collar height and seal properly. Gasoline pours freely without leaks but the alteration was required on the spout collar in order to fit my one gallon Blitz cans. Plural intended.
Gary Holder
2025-01-10 20:30:22
I had to use my old cap with the new spout. Amazon said it would work on my can, but it would not tighten down. The screw threads were not compatible.The spout does not flow much over a trickle. Very poor design.I would suggest that if you want to use this spout, and it happens to fit your can, add a vent and vent cap.It should then work as well as the flexible spout type cans with the vent.Boo to Biltz for not standardizing the cap threads!
JL
2025-01-04 17:34:05
Used the on my Blitz 1 & 5 gallon cans.Rings are very tight to get on. Thread them on without the nozzle first. I applied a dab of silicone grease to the threads when I installed the nozzles. Now they spin a lot easier for refilling the can.Also, the tab on the little cap is large enough to drill so you can attach a string to tie it to the nozzle.Overall, these are a great replacement nozzle and seal very well.
Sandace Barnes
2024-12-16 17:39:39
Purchased these for a couple of gas cans that needed new tops. Works great!
Recommended Products