Your cart is empty.
Your cart is empty.Product Description
Fitment:
For 50cc 70cc 90cc 110cc 125cc 140cc 150cc Pit Dirt Bike and other chinese brand.
Such as SSR,Taotao,Coolster,Roketa,Apollo,SDG,Stomp Demon X, WPB, Orion, M2R, Lucky MX, Thumpstar, Explorer, Braaap, Atomik, Pitpro, Pitster Pro, DHZ, Piranha ，YCF,IMR,x-pro,Baja,Motovox,TTR,BSE,Kayo,DHZ,GPX,Braaap,Lifan,YX,Ect
Specification
Product Name:Pit Bike Brake Assembly
Condition: Brand New
Color:Golden
Size
- Brake Cylinder Mounting Hole Distance: 42-50mm / 1.65-1.97"
- Brake Oil Pipe Size: 500mm / 19.68" hole diameter:79mm/3.11"
- Mount Axle Hole:12mm/0.47"
- Banjo Bolt Size: M10X1.25
Package Contents
- 1 x Brake Assembly
- 3 x Tie
- 1 x Extra Brake Pads
- 1 x Fuel Filter
For 70cc - 150cc Chinese Pit Dirt Bike
Customer
2025-08-19 14:17:43
The media could not be loaded.
TheWoodWarrior
2025-07-30 10:39:26
For anyone looking, the factory caliper on a Trailmaster mb200 is nearly impossible to find outside of GoPowerSports, and they only carry the entire brake kit (lines, master cylinder, lever etc) for over $120. Those are generic calipers with no brand specific manufacturer, no different from this one. You don’t need the pedal operated master cylinder that comes with this unit, but the caliper is an exact fit to the factory mount. The fittings are also cross compatible, and in my case there was no need for spacers. It’s a straight bolt on fit.
abdiel
2025-07-20 16:36:00
Doesn't fit on a taotao 125cc dirtbike as the description says
101101
2025-07-12 13:00:59
Had to make 2 modifications to fit 2020 Apollo 125cc bike:1. The piston was way too long and would have resulted in the brake pedal being vertical. The big thread on the piston was 6mm (I think). We re-threaded the piston to 5/16-24, adding a couple inches of additional thread. We then tapped the female portion to 5/16-24 as well and cut off the remainder of the piston/bolt.2. One of the holes that mounts the bracket to the frame was a bit too small. Using a reamer on a drill gun, we increased the hole diameter by 1 or 2 additional millimeters.After these 2 modifications, it is working fine.
Not this time.
2025-06-18 12:07:07
Fit great. Only thing you need to is find the right shim/washer between the braket and axle. Easy installation. Great upgrade from factor setup.
Joe k
2025-05-14 10:55:24
The issue with stock pit bike brakes is the inner pad just sits in a groove. Once it wears it just spits out randomly in the woods. These are way better, more breaking power and pads are secure and cannot fall out.
Will fit XPRO 125cc!!
2025-04-11 13:44:09
Had to use piston arm from xpros master cylinder super easy to do and comes with extra brake pads!!and alr has brake fluid!!! Very inpressed! Paint is CHEAP tho might wanna spray paint it w.e color before putting on
John boy
2025-01-23 10:04:33
I managed to make it work on my ssr125 had to make spacers as the oem spacers would not work but other than that works great
Retep
2024-12-10 12:06:34
Just plug and play. Fluid filled and pre bled
Customer
2024-12-04 20:38:03
Works as should.
Recommended Products