Your cart is empty.
Your cart is empty.The GEARWRENCH combination wrenches are durable tools for most jobs. They are made from alloy steel with either a full polish or satin finish that resists rust & corrosion. The off-corner loading design on both ends provides a stronger grip on fasteners, reduces fastener rounding, and delivers up to 25% more torque to the fasteners. Sizes are stamped on the beam for quick, easy, & permanent identification. The box end is offset 15° for increased access to fasteners. Available in stubby & long pattern lengths and 6 & 12 point, the GEARWRENCH combination wrenches are a must have for every toolbox.
Anon
2025-09-04 11:42:25
Decent bite for the price. It's done what I needed it to do. It's a wrench and makes for a pretty decent hammer too.
Customer
2025-09-03 16:26:06
Well made and came in handy when I realized my set didn't have this size.
Anon
2025-08-25 10:18:00
Decent bite for the price. It's done what I needed it to do. It's a wrench and makes for a pretty decent hammer too.
Customer
2025-08-06 14:34:14
Well made and came in handy when I realized my set didn't have this size.
E. A. Jacques
2025-08-04 13:40:42
Some how some way my 10mm 6 point combination wrench ended up missing...and of course just when I needed it. So I had to delay replacing the brake pads on my rear brakes and order a new wrench. I did not have any Gearwrench tools in my box, but after reading a few reviews and considering the price it seemed like a good one to try.It might not be Snap-on level quality, but it's a very well made wrench at this price point. It's made from good quality alloy steel and it's plenty thick too. Only time will tell how durable it is, but it helped get the job done and I have no problem recommending Gearwrench as a well made budget tool brand.
Paul54
2025-08-03 16:38:18
10mm wrenches disappear like magic where I live. This is a good replacement for my metric set.
Tony
2025-07-26 16:06:25
It says it's .99 feet and is definitely not almost a foot long. Will be returning because I need a longer wrench. Otherwise it seems good for the price
Wayne D.
2025-07-25 14:02:35
I’ve used it twice already to loosen bolts my 12 point wrenches slipped on. Good deal.
LARRY
2025-07-14 15:33:33
It worked perfect for the Nissan. I was working on.
jason ray
2025-06-26 13:51:52
At last I almost have a complete combination wrench set....... when your only local choices are harbor freight, Mac, Snap-on, Matco, Lowe’s or Home Depot you tend to go with what you can find and gives you the least hassle.....In my case and profession the choice was harbor freight and when you buy harbor freight you never get a complete set of anything (wrench’s, sockets, impact sockets) which applies to their Pittsburgh line of tool offerings and the quality at times is very sketchy.So I had to buy this 6 point 18mm combination wrench that harbor freight insisted that I didn’t need and guess what? it gets used on regular basis and the fit is exact unlike the Pittsburg line of tools which ( and I speak from experience) tends to be sloppy, mismatched, mismarked or not marked at all.The gear wrench line of tools has the look and feel of quality along with a precise fit and durability as well
Dougie
2025-06-23 14:47:42
Gearwrench makes good quality tools. Needed a 6 point wrench for the carburetor drain plug on my single cylinder Honda motors. This wrench works much better and doesn’t slip like the 12 point wrench’s do on the tapered head of the drain plug.
Customer
2025-06-22 16:14:24
Excellent price and fast delivery
Customer
2025-06-13 14:29:29
This 18mm wrench was just what I needed to change the rear shocks on my Grand Caravan. My wrench set went from 17mm to 19mm.Do not expect this $9 wrench to be Snap-On quality. It is $9, made in China quality, but it did the job. That’s all that counts.
francois salvail
2025-06-09 13:38:09
Satisfait
cb
2025-06-05 16:30:37
I love the six sides instead of twelve, it prevents slipping and stripping the nuts. Also it's a bit longer than standard 10mm wrenches so you have more unscrewing power. The price is also good
E. A. Jacques
2025-05-30 12:25:20
Some how some way my 10mm 6 point combination wrench ended up missing...and of course just when I needed it. So I had to delay replacing the brake pads on my rear brakes and order a new wrench. I did not have any Gearwrench tools in my box, but after reading a few reviews and considering the price it seemed like a good one to try.It might not be Snap-on level quality, but it's a very well made wrench at this price point. It's made from good quality alloy steel and it's plenty thick too. Only time will tell how durable it is, but it helped get the job done and I have no problem recommending Gearwrench as a well made budget tool brand.
Paul54
2025-05-24 15:46:09
10mm wrenches disappear like magic where I live. This is a good replacement for my metric set.
Tony
2025-05-08 18:37:03
It says it's .99 feet and is definitely not almost a foot long. Will be returning because I need a longer wrench. Otherwise it seems good for the price
Wayne D.
2025-05-04 13:36:09
I’ve used it twice already to loosen bolts my 12 point wrenches slipped on. Good deal.
LARRY
2025-04-23 16:34:36
It worked perfect for the Nissan. I was working on.
jason ray
2025-04-10 16:02:15
At last I almost have a complete combination wrench set....... when your only local choices are harbor freight, Mac, Snap-on, Matco, Lowe’s or Home Depot you tend to go with what you can find and gives you the least hassle.....In my case and profession the choice was harbor freight and when you buy harbor freight you never get a complete set of anything (wrench’s, sockets, impact sockets) which applies to their Pittsburgh line of tool offerings and the quality at times is very sketchy.So I had to buy this 6 point 18mm combination wrench that harbor freight insisted that I didn’t need and guess what? it gets used on regular basis and the fit is exact unlike the Pittsburg line of tools which ( and I speak from experience) tends to be sloppy, mismatched, mismarked or not marked at all.The gear wrench line of tools has the look and feel of quality along with a precise fit and durability as well
Dougie
2025-04-09 14:26:46
Gearwrench makes good quality tools. Needed a 6 point wrench for the carburetor drain plug on my single cylinder Honda motors. This wrench works much better and doesn’t slip like the 12 point wrench’s do on the tapered head of the drain plug.
Customer
2025-03-07 11:40:11
Excellent price and fast delivery
Customer
2025-02-26 19:01:17
This 18mm wrench was just what I needed to change the rear shocks on my Grand Caravan. My wrench set went from 17mm to 19mm.Do not expect this $9 wrench to be Snap-On quality. It is $9, made in China quality, but it did the job. That’s all that counts.
francois salvail
2025-02-20 14:02:55
Satisfait
cb
2025-02-13 18:01:28
I love the six sides instead of twelve, it prevents slipping and stripping the nuts. Also it's a bit longer than standard 10mm wrenches so you have more unscrewing power. The price is also good
Recommended Products
