Your cart is empty.
Your cart is empty.An ACDelco GM Original Equipment Liftgate Release Switch is a GM-recommended replacement for your vehicle’s original component. It releases the liftgate latch to allow the tailgate to be opened. This original equipment liftgate release switch has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
larry reibsome jr
2025-09-06 17:21:46
ordered this to replace my wifes worn out trunk hatch release button, worked great easy to install on her 2017 chevy equinox LS
Chuck Norris
2025-08-17 15:23:59
The best that I can tell is that this switch either does or does not call for a bezel to fit in the rear hatch assembly. Earlier models of the 2nd Gen Equinox and Acadia had a bezel that holds the switch in the assembly otherwise this switch seems like it's too small... My year, 2016, it is a direct fit. The official switch dry rotted after only 6 years so we'll see how long this will last. This part was OEM and a great price - I recommend to look under the assembly at your switch to establish if you'll need the extra part.
Patrick Mortoti
2025-08-02 10:14:15
This item was received on time and is the exact OEM GM part. Very easy to install with no modifications.Great value for money!!!
Jeremy McDaniel
2025-07-31 16:59:08
I can confirm this works for the 2010 Equinox. Order the bezel part number mentioned in the other review and it will be better than the original.After you snap of the plastic shell from the inside and remove the four 10mm nuts that hold the chrome chevy emblem and backup camera, you simply detach the plug and switch them out. Worked perfectly and has a nice tactile feel to it, better than the original.
Mr.T
2025-07-26 10:36:44
2010 equinox rear hatch release switch fell apart, the touch pad dry rotted and fell off. I purchased this along with the plastic piece that snaps into the hatch and holds this switch, part# 22864934. After taking a single torx head screw out of rear hatch and popping the two halves of plastic panels off the hatch door and taking a few 10mm nuts off the chrome piece that holds the switch in place. I was able to unplug the factory switch and plug this new one in and put back together. Took about 15 minutes to swap out and it works again.
Brian Guyette
2025-07-22 18:42:15
Perfect fit replacement
Michael Edwards
2025-07-17 21:48:18
Disappointed that when I put in my car specifics it brought me to this part. Being that it was “Genuine A/C Delco†parts I thought it was all good. When received, the push button was half the size of the original. I had to return. Sorry it was wrong. I just can’t trust the way this worked but, I will continue to shop Amazon.
Juan Garza
2025-07-13 10:25:50
Is hard to install andDon’t work
Emanuel
2025-07-02 18:59:58
Pieza correcta, rapidez en el envÃo
Jen
2025-06-23 21:21:17
Great product and it worked on my 2010 Chevy Equinox. Please note this is only the switch so when I took off mine off the trunk I needed a plastic piece to have this switch fit in it. I wish that came with it or if they sold as a add on. Anyway it worked out I just had to improvise. The switch works great. My trunk opens again, no more embarrassing moments as the trunk would not open. Shame on Chevy for installing a poor original switch. This product saved the day.
tingpuff
2025-05-26 17:16:16
It was smaller(button part) than my original (2012 GMC Terrain) but my boyfriend was so smart for fix it and this is Working well at all.Thanks
John
2025-05-22 10:14:47
It didn't work for my truck like it said it would
larry reibsome jr
2025-05-15 09:21:26
ordered this to replace my wifes worn out trunk hatch release button, worked great easy to install on her 2017 chevy equinox LS
Chuck Norris
2025-05-08 09:27:31
The best that I can tell is that this switch either does or does not call for a bezel to fit in the rear hatch assembly. Earlier models of the 2nd Gen Equinox and Acadia had a bezel that holds the switch in the assembly otherwise this switch seems like it's too small... My year, 2016, it is a direct fit. The official switch dry rotted after only 6 years so we'll see how long this will last. This part was OEM and a great price - I recommend to look under the assembly at your switch to establish if you'll need the extra part.
Patrick Mortoti
2025-05-03 13:23:14
This item was received on time and is the exact OEM GM part. Very easy to install with no modifications.Great value for money!!!
Jeremy McDaniel
2025-05-01 17:51:33
I can confirm this works for the 2010 Equinox. Order the bezel part number mentioned in the other review and it will be better than the original.After you snap of the plastic shell from the inside and remove the four 10mm nuts that hold the chrome chevy emblem and backup camera, you simply detach the plug and switch them out. Worked perfectly and has a nice tactile feel to it, better than the original.
Mr.T
2025-04-29 16:10:13
2010 equinox rear hatch release switch fell apart, the touch pad dry rotted and fell off. I purchased this along with the plastic piece that snaps into the hatch and holds this switch, part# 22864934. After taking a single torx head screw out of rear hatch and popping the two halves of plastic panels off the hatch door and taking a few 10mm nuts off the chrome piece that holds the switch in place. I was able to unplug the factory switch and plug this new one in and put back together. Took about 15 minutes to swap out and it works again.
Brian Guyette
2025-04-22 11:45:00
Perfect fit replacement
Michael Edwards
2025-04-19 16:39:29
Disappointed that when I put in my car specifics it brought me to this part. Being that it was “Genuine A/C Delco†parts I thought it was all good. When received, the push button was half the size of the original. I had to return. Sorry it was wrong. I just can’t trust the way this worked but, I will continue to shop Amazon.
Juan Garza
2025-03-23 13:10:15
Is hard to install andDon’t work
Emanuel
2025-03-15 12:05:29
Pieza correcta, rapidez en el envÃo
Jen
2025-03-02 14:15:20
Great product and it worked on my 2010 Chevy Equinox. Please note this is only the switch so when I took off mine off the trunk I needed a plastic piece to have this switch fit in it. I wish that came with it or if they sold as a add on. Anyway it worked out I just had to improvise. The switch works great. My trunk opens again, no more embarrassing moments as the trunk would not open. Shame on Chevy for installing a poor original switch. This product saved the day.
tingpuff
2025-02-24 21:35:54
It was smaller(button part) than my original (2012 GMC Terrain) but my boyfriend was so smart for fix it and this is Working well at all.Thanks
John
2025-02-04 15:37:44
It didn't work for my truck like it said it would
Recommended Products
