Your cart is empty.
Your cart is empty. Use PoE injector with PD to expand your network to where there are no power lines or outlets,where you wish to fix devices such as AP ,IP camera or IP Phone etc.
This PoE injector is a single port Gigabit PoE injector offer a compact and cost effective,it can convert standard 100-240V ac power into low-voltage.DC that runs over existing LAN cable to power up IEEE 802.3af/at compliant network accessories. Remote powering of wireless LAN(WAN) access points,IP security cameras,VoIP telephone and other low port density installations.
Features: Up to 15.4W/30W of Power on 2-pairs for IEEE802.3at and IEEE802.3af POE Devices
Supports 10/100/1000 Base-T applications
Led indicators power input and PoE output
Internal AC/DC converter no need for external power brick
Easy plug and play installation
Muti-protection,
Specification:
Pass Through Data Rates: 10/100/1000Mbps
Output Power Voltage: 54~55VDC
PoE Port Power: 30W max
AC Input Voltage: 100-240VAC
Ac Input Current: 0.5A 100-240VAC
AC Frequency: 50 to 60 HZ
Dimensions: 85x42x30 mm & 3.3x1.65x1.18 in
System Indicator: AC power
Connectors: shielded RJ-45,EIA 568A and 568B
Operating Ambient Temperature: -0 to 40 ℃
Storage Temperature: -40 to 60 ℃
Installation Steps:
1.Use a CAT5 UTP cable to connect port of Ethernet devices to the LAN port
2.Connect AC cable with Injector and Socket
3.Connect the PoE OUT port to a PD with CAT5 UTP cable
miked
2025-08-27 15:45:12
I use it to power a Raspberry Pi. It's definitely not overloaded and works well.
Averroes
2025-08-15 15:03:16
I used these injectors to power 3 Reolink dou2 POE surveillance cameras. You simply connect it to a source of electric power and your router/internet extender to power your POE cameras. The price is very reasonable relative to other brands. I highly recommend this POE injector.
Kindle Customer
2025-07-04 18:09:36
Works good for my Unifi AP
Andy
2025-07-03 15:43:05
Using as a preschool camera for power.Works as it should.
FLORIDAPCGUY
2025-06-29 14:20:51
Works well with my wireless mesh access point
David
2025-06-17 16:51:55
I purchased two of these to power an IP phone that couldn’t get POE power from the switch. It permanently bricked the phone immediately after plugging it in. I thought maybe it was just a bad phone, so I switched to the other injector that I purchased at the same time and used a different phone. That phone is now dead as well.This was an expensive failure. I returned both POE injectors. I’m an IT professional and I know how these work. The specs on the phone matched the specs on the POE injectors, but they still failed dramatically.If you get these, test them carefully on expendable equipment before using them on anything you care about. Or better yet, just skip them altogether.
Sandro P
2025-05-29 19:07:45
Power at the right price, worked and still working!
Customer
2025-05-09 12:30:44
Works great!
Customer
2025-04-07 18:28:26
Powers my TP-Link EAP670 just fine. No complaints so far.
Kevin Skipper
2025-04-06 17:06:04
I am using it every day
DaveT
2025-03-17 15:08:24
This seems like a good price for an PoE injector. The engraved black on black "LAN" "PoE" labels are a bit hard to see, so I placed back-on-white labels on top to avoid confusion when connecting cables. I opted for this model over another as it used a power cord vs a wall-wart power connection for greater flexibility. It has been powering my PoE security camera for 5 days so far.
discerning_customer
2025-01-10 16:36:47
This injector claims to deliver POE+ (30W, 802.3at Compliant) but it does not.I bought it to power a Netgear access point and it only received the low power POE (802.3af).Bought a different injector and now the access points receives full POE+ .
Recommended Products
