Shopping Cart

Your cart is empty.

Your cart is empty.

Gigabit POE Injector, 48V 15.4W Power Over Ethernet, IEEE 802.3af Compliant, 10/100/1000Mbps, Compatible for TP-Link TL-POE150S, TRENnet TPE-113GI

Free shipping on orders over $29.99

$11.98

$ 6 .99 $6.99

In Stock

About this item

  • Converts a non-PoE Gigabit port to a PoE Gigabit port and network a PoE device located up to 100 meters (328 ft.) Away. If you have a PoE (802.3af) standard device, and need to use PoE technology to provide it with both network and power.
  • Gigabit Ethernet Speed. This PoE injector equiped with 1 Gigabit Ethernet port input and 1 PoE Gigabit Ethernet port output, which can offer up to 2Gbps full duplex Ethernet speeds.
  • Compact and cost effective PoE+ injector which offer multiple protection, such as over current protection, over load protection, over voltage protection and anti-interference protection.IEEE 802.3af compliant
  • Plug & play, no configuration is needed, simply connect a PoE network device, accommodates most installations scenarios.Whether you want to use it with an IP camera in your home or work place, a VoIP phone used in a conference room, or use it to provide power and network to a wireless AP, this item is very suitable as long as your device is 802.3af standard 48V PoE.
  • Compatible with TL-POE150S and most Gigabit 802.3af IP camera, IP Phone, Wireless IP point and other PoE devices.


" Note: This PoE injector work for 10/100/1000Mbps Gigabit network.

The iCreatin PoE Injector can save you money by using an existing Ethernet line to deliver data and power.
The iCreatin PoE Injector can easily connect any IEEE 802.3af-compliant device to a non-PoE LAN switch port.
This PoE Injector can be used to connect a wireless access point, IP phone, network camera, or any IEEE 802.3af powered device to a LAN switch.
Reduce Wiring Costs With the iCreatin PoE Injector you can dramatically reduce wiring costs by powering devices through your existing Ethernet line rather than running new AC power lines.
To use this PoE injector, all you need to do is connect the iCreatin PoE Injector to the LAN switch port, and then use your existing Ethernet Cable to deliver DC power and data to your device.
Protect Your Equipment Now that you are running DC power to your networked equipment through the Cat5 cabling, you need to be sure that your devices are protected from power problems.
The iCreatin PoE Injector is designed with short circuit protection Over Current and Over Voltage Protection, keeping your devices safe. It is also protect your products from overloads over 350mA and high voltages exceeding 52V.

Specifications

2 Gigabit Ethernet ports
48-52V output voltage , up to 15.4W rated power, support IEEE802.3af,
Power feed: V+ 4,5; V- 7,8;
Data rate: 10/100/1000Mbps.
Deliver power up to about 328.1 feet(100 meters)
Support 100-240V voltage input

What in Box?

1 x US wall plug Gigabit PoE injector


Customer
2025-08-19 10:42:42
Works well. No complaints. Power Link Pro Z.
Hagan reviews
2025-08-05 16:23:20
Great price, plug and play and works flawlessly for those 1-2 off situations where you need a POE connection on a standard switch port.
HomeNerd
2025-06-12 10:52:44
I have this injector running a Meshtastic wisblock on a tower. It has been 7 months straight and is located outside with a weatherproof cover. No issues due to heat or cold so far.
vwRabbit
2025-06-01 13:27:19
small and mighty but no way to mount it.
Ben
2025-05-28 14:16:07
Works great.
Eric Rose
2025-05-16 15:59:30
I've been using this for months now and no issues. Solid product
Joseph Clore
2025-05-10 19:40:46
As described. Priced right. Will buy again.
Bradley S Cantrell
2025-03-16 16:00:43
Used it to test a Unifi G5 camera. Works great. Would buy again.
André Renaud
2025-02-17 17:31:42
Bonne qualitée et livraison en temps
Sheldon Regula
2025-02-08 12:45:30
Very good
Souxinh
2025-01-20 20:48:31
As described.
Peter
2024-12-16 11:04:35
I could not get gigabit without packet loss using an unifi u6lite with this poe injector. If I set it down to 100 fastethernet it was fine. Ended up cracking open the box and looking at the pcb. Looks like they repurposed this as one track on the pcb has been scratched off by a screwdriver and a new wire soldered to bypass a resistor on the board. Unfortunately a loss and chucking them in the bin as I bought 2. Lesson learned.
Recommended Products

$16.69

$ 7 .99 $7.99

4.9
Select Option