Your cart is empty.
Your cart is empty.Product Description
GM CLIMBING - Micro Prusik Minding Pulley 25kN
Function pulley to be integrated with brake hitches and build progress capture on haul system.
Installed to tend slack and advance hitches in Ddrt climbing or work-positioning.
Making efficient redirects in bear rigging, home pulling exercise devices, and more to explore.
EASY USE
Light and Compact
- Palm-size pulley in lightweight of 3.7 oz.
- The micro pulley is easy to use with only one hand.
Quick to attach to the rope
- Rotate freely around the axle.
- It's convenient to install the pulley anywhere on the rope.
Suit most carabiners
- The pulley accommodates carabiners of most shapes since side plates are curved to stay fully close against each other on the top.
PMP - Prusik Minding Pulley
The bottom of side plates is designed to be flat to form a prusik minding pulley.
Used at the anchor with brake hitches as progress capture which is critical in a haul system.
Prevent brake hitches to be sucked into the pulley, for a more efficient haul.
Also, a functional pulley to tend slack and advance hitches in Ddrt system or on a work-positioning lanyard.
STURDY and VERSATILE
Rated to 25kN breaking strength: 10kN higher than required 15kN by CE and UIAA.
Qualified to build up efficient pulley mechanical advantage systems:
- Haul your partner out of the crevasse
- Rig gears or heavy loads when mountaineering
- Pull out a stranded car/ boat
- Haul food and stuffs out of reach when camping - bear rigging
An efficient general-purpose pulley for daily recreational use:
- DIY pulley rope fitness home gym
- Suspending your bike in the garage
- Tensioning system for your slackline, and more
Terry M.
2025-09-03 16:17:28
Bought these to use on a BWCA camping trip to lift food packs off the ground for bear prevention. We had about 90 lbs in two packs that we lashed together. We used three pulleys, and one person was easily able to lift the packs and tie them off. While 90 lbs isn't a great stress test, the wheels all rolled well and gave us the mechanical advantage we were looking for so we didn't have to resort to herculean efforts or unsafe conditions to try and push up the packs from underneath. It was definitely more of an investment in these than in many cheaper sheet-metal pulleys with no bearings, but they should last a lifetime for this kind of light-duty work. I used 550 paracord with them with no issues at all. Definitely like the design to open them up and add a pulley anywhere along the rope, too.
Baked alaska
2025-08-17 13:43:52
Pulleys are very great for the price! Craftsmanship meets or exceeds Petzl pulleys I have and paid a lot more for. Thx!1/25/19 Update: These pulleys have migrated to 1st place on my climbing harness and climbing system. I interchange between a Vt(French prusik I prefer)and Distel hitch-they remain smooth. I have a tree service business and tend put gear through the ringer-and these have really passed the test. I believe I will be ordering a 1/2 dozen more!!
Brady K.
2025-08-15 15:00:01
I am using these for my whitewater pin kit, and they are light, strong and do the job well.
Customer
2025-08-14 21:01:32
Worked great got a truck unstuck and since it didn't explode I'd say it's rated correctly.Was still usable after that load.
Jim Moran
2025-08-10 10:11:25
Strong, simple and clean. Easy to connect with a large ceiling hook.
C. Varner
2025-07-15 16:38:56
I bought these to assemble a "Z-rig" 3:1 mechanical advantage pulley system for pulling down small trees and whatnot. Very good quality, smooth bearings, etc; good price compared to many similar options.
feelthepayne
2025-07-11 16:42:30
The pulley and carbineer are fine, but the hitch cord is way too stiff. I have tried half a dozen types of climbing hitches on a 1/2" rope and it doesn't want to grab without help and once it grabs, I can only rappel about 10 feet before it locks up so tightly that I can't move. This is with a rope wrench SRT system.
Daniel M
2025-06-21 15:59:52
All 3 of these products are of excellent quality workmanship. I have used them mostly for rappelling and some ascending. All 3 products have worked flawlessly!
Mark Reynolds
2025-04-25 13:16:55
I use them for a lot of rigging and redirects worth the money.
Mas
2025-03-25 15:33:20
This is a well made and certified compact device ideal for carrying 'on your person'. Not much else to say other than appears to be a good value purchase.
grover milton
2025-03-02 14:10:25
Good
Jim
2025-02-23 18:32:20
These are really well made at an affordable price. I got two of their 30kN pulleys and their rigging plate as well, all excellent stuff. I only have 8mm rope and a prusick slips through this as it's for larger rope. No problem for me as I don't intend to use prusicks. The way the brass bearings are made keeps the roller centered. Shipping was fast. All in all a very good product, I'm a happy camper.I don't know why they are called micro as they are a good decent size not some tiny things.
Customer
2025-01-13 17:43:56
On time, good quality,
Recommended Products