Your cart is empty.
Your cart is empty.Product Description
Marisa
2025-08-04 10:58:09
The GOOFIT Motorcycle Speed Controller 36V 500W is a great replacement for electrical scooters, tricycles, e-bikes, and bicycles. It's a simple and affordable upgrade that can really boost the power and performance of your ride, pushing my Razor scooter over 20 mph. Wiring and installing the GOOFIT controller was super easy. ðŸ‘ðŸ¾ðŸ‘ðŸ¾
Joey morris
2025-08-03 10:55:26
Product is good but don't work for my scooter
Daniel B.
2025-07-02 12:15:59
The pcb is tiny, about 1/3 of the case. The mosphets are tiny and have 0 markings on them. There is no thermal paste or pad just kapton tape. The wires are not labeled like in the photos, most have no markings at all and others you will need to translate. The motor wires were also reversed polarity. It was nice being able to reduce the controller size by 50% just moving it to a properly sized enclosure and it is working reliably but I will soon be beefing up the fet traces at least. This “500 watt†controller is less powerful than the 350w controller it replaced. Overall I wouldn’t recommend it, spend a few more bucks.
7 Customer TWKishere
2025-05-23 10:05:58
It would be nice if these things could come in English and a set of instructions?
M. Adam Davis
2025-04-27 12:15:39
There are no instructions, but the diagrams here are sufficient.These are often not plug and play, so you might need to plan around differences in connectors, but it does work and do what it's supposed to do. I used this to convert a pedal assist bike to a full e-bike with a throttle.
Lu Family 😄
2025-04-24 09:26:19
Perfect product! It worked perfectly for my project and supplied enough power to function properly. The setup was a little confusing as the labeling was not the most accurate but It was clear enough to figure out with some testing.
Sevendroog
2025-04-19 11:22:09
Got this to replace the broken e-bike controller on my ebco ucr10. The wiring diagram is conspicuous by its absence but some googling have provided a suitable diagram. Looks straightforward enough to replace and looking forward to using. Much cheaper than the X-Trans original and suitable with my battery voltage.
TJ
2024-12-05 15:24:13
GOOFIT Motorcycle Speed Controller 36V 500W Replacement for Electrical Scooter E Bike Scooter @ £18.89This motor controller is disappointingly underpowered and poorly designed. The PCB is tiny, taking up only about a third of the case, with minuscule MOSFETs that have no markings. There’s no thermal paste or pad—just Kapton tape. The wires are also not labelled as shown in the photos, with most having no markings at all, making installation frustrating. Some wires require translation, and the motor wires were even reversed in polarity.Additionally, the lack of instructions in English makes setup even more difficult.Pros:• Compact size• Can be modified for better performanceCons:• Weaker than advertised• Poor build quality• No proper labelling on wires• No English instructions / any instructionsOverall, I wouldn’t recommend it—spend a bit more for something better.
Recommended Products