Your cart is empty.
Your cart is empty.Product Description
GRAFF Hacksaw blade
8% Cobalt
GRAFF Hacksaw blade is a narrow strip, at the ends of which there are holes for fastening.
In the GRAFF product catalog, hacksaw blades are presented in two types:
- from High-Speed Steel (HSS). They have more sustainable teeth;
- from Bi-metal 8% Cobalt. They are made of carbon steel, on top of which a HSS strip is welded to serve as the base for the teeth.
Characteristics:
- Type: Hacksaw blade
- Working materials: metal, steel, aluminum, soft metals
- Length: 300 mm / 12 Inch
- Thickness: 0.62 mm / 0.02 Inch
- Width: 13 mm / 0.51 Inch
- Number of teeth: 24 TPI
The GRAFF saw blade is serrated with 24 TPI (teeth per inch) on one side. The hacksaw blade has a fine-tooth pitch made of 8% Cobalt.
8% Cobalt metal saw blade can be bent easily without losing its working properties. It is suitable for a cutting angle of 45°.
The GRAFF saw blade is a special accessory for most hand saws and hacksaws for cutting materials such as:
- metal;
- steel;
- aluminum;
- soft metals;
- stainless steel.
HACKSAW BLADE INSTALLATION
The installation method is determined by the design of the fastening system on the hacksaw itself.
- With a threaded clamp, the hacksaw blade is inserted into the corresponding ledge, tighten slightly, and then secured with a wing nut.
- To install the saw blade on a hacksaw using a lever mechanism, simply pull out the lever that is opposite the handle, place the saw blade, and return the lever to its original position.
- When properly tightened, the hacksaw blade should ring lightly and vibrate slightly. During operation, the saw blade should not change the direction of movement under load.
Have to work with a hacksaw blade in a reciprocating motion with simultaneous pressure.
Jonathan
2025-08-31 14:46:58
Crazy sharp out the box and I do think it's real cobalt because I had one of the teeth snap off because it's so hard the previous HSS blade I had didn't do that and I bent the shizz out of that blade but this one will snap teeth off so cut straight and cut right or this blade will snap on you even though I've only had the teeth break on me.
Peter Nero
2025-08-22 16:27:08
Needed some hacksaw blades for general use. Found these on Amazon. High quality product at a decent price, shipped very quickly
RONAA
2025-07-16 15:42:47
These blades do work well on hardened steel and stainless steel. Worth the money if you work with these materials.
mike32927
2025-07-09 19:23:54
These blades worked like a champ for cutting off some rusted and damaged legs from a metal shelving unit.
Harley Hal
2025-06-22 15:33:51
these hacksaw blades are made of excellent quality high carbon steel The cutting surface is supreme it will go right through a copper or steel pipe with very little effort I highly recommend these being a contractor for the last 40 plus years
Slogbark
2025-06-17 11:43:24
I've only used one blade so far. That is a good thing, it cut clean, quick, and very well.
M. Riggs
2025-06-14 17:52:35
Excellent hacksaw blades, stays sharp longer than other types.
P. Pineda
2025-04-28 16:45:33
I'm tired of purchasing blades that lose their cutting ability halfway through a cutting job. Glad I found these.
Arturo Ãlvarez
2025-04-15 11:28:24
Muy bueno para cortar acero inoxidable
Gordon Williams
2025-03-12 12:08:05
Really pleased with the quality of the blades. Ideal for the job and the price was great too
Herbert Fischer
2025-03-09 16:49:30
Gute Qualität
John
2025-01-24 13:35:58
TOP PRODUCT
Kunde
2025-01-06 15:45:36
immer wieder
Recommended Products
$20.92
$ 9 .99 $9.99