Your cart is empty.
Your cart is empty.The Elipse mask range, designed and produced in the UK by GVS, represents an important innovation in the respiratory safety sector. Elipse is among the lightest in it’s category, thanks to the ergonomic shape which allow the operator a wide field of vision, and means they can be easily worn with glasses, helmets and headphones. The low profile masks are made using hypoallergenic materials, and the replaceable filters have a minimum protection efficiency of greater than 99. 97% of particles of 0. 3 microns while they achieve 99, 98% for 0. 04 micron particles. The Elipse P100 mask carries the highest safety classification for a particulate filter. This makes Elipse perfect for everyday applications such as DIY and commercial construction, through to the more demanding environments of metalworking, welding and stonemasonry. P100 filters offer maximum protection against a wide range of dust particles and smell, with replacement filters available when required.
robosolo
2025-08-15 11:39:49
This P100 respirator is one of the few that fits easily under my welding mask. It seals against my face (virtually no leakage) and is super-comfortable, with no sharp edges to dig in. Surprisingly, it was so comfortable and easy to breathe that I almost forgot I had it on after an hour of use.I've had many other respirators and this one is by far the best.
Belinda H.
2025-05-28 15:00:18
I’ve got a couple of these. Half mask and full mask. I use the full mask for router projects and it works phenomenally. Though it is a little tight around my glasses. The half mask has saved my life twice. There is nothing better for cleaning up dog diarrhea than this item. I’d rather go gloveless than maskless. ;-)It filters out any and all odor. It’s a game changer. If it’s filtering out odors, it’s filtering most things out. The half mask is very comfortable to wear for long periods of time. More comfortable than a KN95 for sure. I like any mask it makes eye protection difficult so consider getting the version with a visor if you’re concerned with flying debris.
J.Mack
2025-05-14 17:37:15
I did a lot of research before buying this mask. I was looking for something lightweight and reusable with great filtering properties for doing yard work, yard debris clean up, mowing etc. My goal was to not breathe in dust or mold while working outside etc. The design is pretty good, unfortunately the mask was too big for my face, so I haven't been able to use it as intended. On a side note, I did try to return it, however it is not a returnable item, which in retrospect made sense because it could/would be a health hazard to return a face mask that's been breathed in, so that was actually plus for me to know. I'm going to order a smaller one, and based on the one I have, I am confident that the smaller one will be perfect because the one I got does meet all of the qualities I was looking for, lightweight, reusable and great filtering properties.
Fox Workshop
2025-04-26 18:05:11
It's the lowest profile dust mask I've seen, which is great for fitting under face shields, respirators, and welding masks, which is why I bought it. It fits very well and I've had no issues with leaking. It's also pretty comfortable. Just don't rely on it to protect from organic vapors/smells because chemicals/smoke go right through. I could even smell the burning smell of wood I got a bit too hot on a lathe.
Chad Heiligenthal
2025-03-31 10:47:51
I use this mask weekly to clean out a dry dust collector. The mask has worked flawlessly for the year I have owned it. I change the filters roughly monthly . The mask cleans easily with dish soap. Let dry and reassemble. Coworkers have attempted to use the cheep paper style masks and they fail miserably. The others have recently bought other masks but the cost means I can buy 2 or 3 of these and be at or still lower than theirs. This one also fits better. The replacement filters are cheaper than the other masks also. The only complaint is to try and find other parts, but the mask is cheap enough were it may not make financial sense to try and buy parts rather than just replace new.
Richranch
2025-03-13 11:44:50
I ran with this mask for several weeks when the smoke in my area due to fires was at dangerous levels. It’s a great mask for running/exercising/gardening/etc. Extremely comfortable and light weight, By far the most comfortable and affective respirator mask I have ever worn. I also use it during all of my house remodel projects as it filters out mold, dust, as well as dangerous chemicals and fumes. By far the most comfortable and affective respirator mask I have ever worn. I also use it during all of my house remodel projects as it filters out mold, dust, as well as dangerous chemicals and fumes. It is also rated for thick smoke from what I remember, and it worked very well for me when I ran in the hills which were thick with smoke. Comfortable and effective respirator mask I have ever worn in 40 years. This mask can be used in industrial, residential, recreational activities. See the product details for specific usages.
NeverKnight
2025-02-26 18:51:43
Its intended for industrial use but these are pandemical times and I wanted something better than a bit of cloth. The resistance on the filters as sold is too high for comfort but if you strip off the charcoal layer it becomes quite reasonable leaving you with HEPA2 level protection. the strap arrangement is practical and comfortable. hangs around your neck , pulls on over your face with one simple motion. the mask itself fits very comfortably with a very good seal. The main downside to this as a daily wear mask is how much it muffles your voice..( that and the check valve which means its entirely about protecting you from them..but not so much them from you..)
WHO?
2025-02-21 18:37:44
Used it at the gun range a few times and works perfect. Fit is good , sometimes leaks if you put your chin down , but hey , it is not custom made to fit my face, it's a commercial product to fit everyone. other than that fit is good , comfortable,not bulky at all , easy to use.Overall ,a very good product.
Customer
2025-02-10 13:16:05
Works very well only bad things about this purchase is that I wish I bought 2 as the price went way up on this item.Also replacement filters are very expensive.Product appears and feels very well made also its very comfortable to wear..
Hdghostrider
2025-01-18 17:40:52
Ok after using this mask I’ve noticed some problems one the exhaust valve gets sticky with moisture from breathing and talking for extended periods of time or working hard, also the talk diaphragm or exhaust is very small so your almost yelling in the mask for anyone to hear you, also moisture buildup can’t drain as the exhaust valve is too high on the mask. These items need to be fixed as the mask is not suitable for long periods of wearing. This mask should be updated to be more effective. Still a nice mask and with updates would be much better. Have fun
micael henry barros simao
2025-01-13 09:05:26
Good quality
Matthew12222
2024-12-01 19:52:59
I've wore these for about 300-400 hours now, comfortable and fit under a welding mask! Easy to adjust and change filters.
Recommended Products
![[20 Pack] New Micro-Dust Protection Face Premium Mask (KF94) Black Medium](images/loading.gif)
$16.99
$ 6 .99 $6.99