Your cart is empty.
Your cart is empty.Product Description
Elevate Your Garage Experience with the H1 Garage Wall Protector
Tired of those annoying car door dings? Imagine a garage where every arrival has no worries. Proudly designed in Australia, the H1 Garage Wall Guards blends resilience and elegance, offering high-resilience EVA foam and patented honeycomb kinetic absorption. This is more than protection – it's peace of mind, lasting over 10 years. Transform your garage into a sanctuary for your vehicle.
Impressive Features of the H1 Garage Wall Protector
Engineered with a hyper-extended length of 79 inches (200 cm) for maximum durability, our protector features a waterproof, heat-treated surface that ensures it will last over 10 years. Effortless to install and designed to accommodate minor parking inaccuracies, the H1 Garage Wall Guard is your ultimate garage companion.
Dimension of H1 Garage Wall Protector: 79 x 7.9 x 0.25 inch / 200 x 20 x 6.5 cm
Great Impact Absorption
- Honeycomb Kinetic Absorption & High-Density EVA
- 79 inches / 200 cm Hyper Extended
- 0.25 Inch / 6.5 mm Ultra Thickness
Built to Last for 10 Years
- Fiberglass Mesh Reinforced Adhesive
- Corrosion, Mildew & Water Resistance
- Anti-Scratch - Level 3 Eiger Scratch Scale
- UL94-V1 Flame Retardant Standard
Easy to Use
- Tool-Free Installation
- Applicable on Different Wall Surfaces
- Versatile Fit for Garage Walls, Bike Wall Rack, and Home & Office Furniture
Built to Last for 10 Years
Water Resistance
The H1 garage wall protector features a waterproof surface that effectively resists moisture and spills, ensuring durability and long-term protection for your garage walls in various weather conditions.
Flame Retardant
The UL94-V1 flame retardant standard provides enhanced safety by limiting the spread of flames and offering reliable protection in case of fire.
Scratch Resistance
H1 wall protector has a Level 3 Eiger Scratch Scale, preserving its sleek look and maintaining excellent protection even after repeated use.
Mesh Reinforced Adhesive
Equipped with a fiberglass mesh reinforced adhesive, the H1 wall guards provides strong and dependable adhesion to different wall surfaces, ensuring it stays securely in place.
Applicable Wall Surface Types for H1 Wall Protectors
How to Install H1 Garage Wall Protector
Step 1 - Measure
- Identify where your car door hits the wall.
- Mark the installation height if possible.
Step 2 - Wipe and Clean
- Wipe the wall with rubbing alcohol.
- Wait until dry before applying the protectors.
- Avoid using household cleaners or water.
Step 3 - Apply Adhesive
- Peel off 4 inches (10 cm) of the adhesive backing and attach it to the wall.
- Gradually peel off the rest while pressing the protector to the wall, keeping it straight and fully adhered.
Step 4 - Press & Last
- Press the protector firmly onto the wall for 30 seconds.
- The adhesive reaches full strength in 72 hours.
Recommended Wall Placement for Installation
Comprehensive Protection
For comprehensive protection, it is recommended to install on both sides of the car door and on the back wall of the garage to prevent accidental collisions while reversing.
Two Doors Coverage
With an extended length of 79 inches (200 cm), the H1 protector covers both front and rear doors, ensuring full vehicle protection.
Perfect for Corners
The H1 adheres seamlessly to 90-degree corners, providing reliable protection where standard garage wall guards often fail to fit.
Ideal for Curved Surfaces
Flexible and versatile, the H1 easily conforms to rounded pillars, ensuring comprehensive protection for even the most challenging surfaces.
Versatile Fit
Bike Wall Rack
Compatible with a bike wall rack, the high-density EVA provides better and more secure rear wheel support than traditional adhesive paddings.
Office Chair
Prevent wall damage from office chair movement, allowing you to focus on your work without worry.
Bed Backboard
A bed headboard against the wall may hit the wall due to movement. The wall protector can reduce noise and prevent wall damage.
ELENA
2025-08-02 19:51:34
Since installing this protector, the car door has maintained a safe distance from the wall, completely avoiding scratches and scrapes. Its material is soft and elastic and can effectively absorb impact. It again protected my car door from any damage when I parked recently. The installation is simple and the effect is remarkable, it is definitely worth buying.
JJ
2025-06-21 13:14:43
Was an easy install. Wipe surface with Alcohol, let dry and apply. Comes rolled up so let it flatten out a while in a warm room to aid in install. Is about a 1/4" thick so protects the door and wall well. It's 2 rolls of 8" wide material, so plenty options for doors that hit in multiple places like my 9th Gen Honda Accord.
K. Galloway
2025-04-23 15:40:53
It does exactly what it is intended to do. So far it has been a bit more than 1 week since we installed this product but it is holding up as far as adhering to the wall of our garage.
Joshua Flores
2025-04-21 10:47:56
I am very satisfied with my purchase! I used to be afraid that the car door would hit the garage wall every time I parked my car, especially when the garage space was limited. After installing this protector, the car door no longer scrapes the wall, and the protection effect is very good. The material is very durable, and the installation is also very simple, fixed firmly, and will not fall off easily!
Ruth guillen
2025-03-21 14:12:53
My garage space is quite tight, and I am always worried that the car door will scratch the wall when I park. After installing this protector, it not only prevents the car door from scratching the wall, but its cushion design also makes the car door safer. The installation is also very simple, just s
Shazim J
2025-03-09 13:02:14
Great quality and easy to Apply. Adhesive is very good and durable for drywall garage but immediately had issue of the foam sticking to its own adhesive backing.
Shad penny
2025-01-20 11:03:31
This protector solved my long-standing problem! My garage space is small, and every time I park my car, I am always worried that the car door will hit the wall. Since installing this protector, the car door has been well protected from scratches or bumps. It is very easy to install and the protection effect is very good. It is worth buying!
The Ranahan Reviewer
2024-12-22 16:25:14
Garage Planet H1 Garage Wall Protector ReviewSOMEBODY in our household cannot keep herself from banging the garage wall whenever she opens her truck doors while unloading groceries. I was going to hang some wooden strips along the wall but never got around to it.Then I saw this product and I thought I'd give it a try, even though they do not recommend using it on textured drywall—which is what I have in my garage (as do I imagine, so do 90% of all garages in the USD).I laid out a light pencil horizontal top line and determined a start and stop point. The existing damage was just slightly wider than two of these strips so I laid them out—one on top of the other—to cover the majority of the dings.I should have given more thought to cutting around the outlet on the wall, so I do not have very attractive results. But hey, it's a garage!I am happy so far with the results, but time will tell how long it holds up to being bashed over and over each week on shopping day.Installation notes:- I took the time to wipe down the wall with isopropyl alcohol. If your wall is actually really dirty, you will want to wash it down first and let it dry completely before wiping it down with the alcohol.- Be sure and draw a guide line on your wall. Once this adhesive comes in contact with the surface that's it. So, there's no do overs. You gotta get it right the first time!- If you do have to butt ends—be advised—the ends as the come from the factory may not be perfectly square (mine were not). Trim your own ends while using a square or they may not fit tight to each other. A sharp utility knife works great for cutting this material.My only real complaint is that the backing sheet is really thin and difficult to get started peeling. It repeatedly tore when I was starting out, (but before I actually was in the process of applying the foam material to the wall). So I'd have to get an edge of the backing sheet lifted again and be more careful the next time. You have to pull the backing sheet carefully while you are pressing the top edge of the protector against the wall surface so you can do so under control. You don't want to have to stop and have to deal with getting the backing sheet started peeling in the middle of the job. And watch that guide line carefully. The material is so long that it is easy to drift off your intended mark. The material is stretchy enough that you can fudge things a tiny bit. But better to keep right on top of your line to begin with.Even though my drywall was lightly textured, the material stuck VERY well. In fact, if I was to try and remove it it would certainly take all the texture with it. So I am hoping it holds up for 20 years!
Recommended Products
$49.99
$ 26 .99 $26.99