Your cart is empty.
Your cart is empty.The H-5265 is a specially designed air chuck that locks onto the cap threads of a Standard Bore valve stem when the sliding sleeve is pushed to the forward position. The chuck releases when the sleeve is pulled back. Available for use with tire changers and auto tire inflators. Order H-5265 OP.
Danner
2025-09-04 12:27:08
Picked this up after a few failed attempts from ones made by AstroAI. This thing is simple, and it just works. Perfect.
Shawn
2025-07-12 13:33:23
This fixed an issue with my Astro Ai tire pressure gauge with inflator. No leaks, easy to attach.
P0ckets
2025-07-10 16:13:45
Great value for money fits and locks on the value really well with no leaks.
Adam
2025-06-28 14:27:36
This product itself seems to be well made, and screws onto the hose like I'd expect. And on the valve stem that I was able to get it attached to, it works very well. However this products isn't as useful as I'd hoped, for me, right now. The valve stems come out of my wheels in such a way that the angle is slightly too acute for this to fit well. I can't get it far enough on to actually seat right. There was one wheel where things seemed to be just right for it, but otherwise I can't use it. If you stems come out more straight from the wheel, or are a little longer than mine, you shouldn't have a problem.
Warren Sproul
2025-06-22 15:03:01
Item arrived promptly and as described. Using this with a compressed air tire inflator, this device provides a tight seal on a tire's valve stem and so prevents air escaping while inflating. Ideal for inflators with a tire pressure gauge which assures accuracy.
Chris Ray
2025-05-30 13:20:52
This thing is amazing. It is a little bit bulky compared to other air chucks, but it is worth it. I made up my own ends to use with the air compressor off of a semi tractor to inflate low tires. Do so at your own risk. This chuck is worth its weight almost in gold because I no longer have to sit there and hold the chuck on the tire stem. The semi compressor kicks off between and 125 and 150 psi, so unless there is a malfunction on the truck side, I'm never going to over-inflate a tire past 150 psi. The setup I made has an oil-filled gauge, so I can set the gauge and fill hose on the ground next to the tire I'm inflating and look at the gauge and instantly know how much air is going to the tire and how much air is in the tire with a valve I built into the assembly. Anyway, once this chuck is firmly seated onto the stem, slide the collar down, and 3 jaws lock onto the stem and won't let go. Like I said, this chuck is a little bulky, but it works fine for getting attached onto every stem I've tried so far. I paid about $11. I have spent a small fortune on air chucks and air gauges, and I wish I just had this one and all the money back I've thrown away on the others. If anyone can find a legitimate application where this chuck does not work, I want to know. Buy this one, you won't be sorry.
Mad Max
2025-05-23 18:18:01
I bought this to replace the air chuck on a new AstroAl Tire Pressure Gauge. It ensures you are locked onto the valve stem and won't leak air. I'm satisfied with buying this product.
John
2025-05-20 14:49:22
These are the best lock on Chuck's I've found. Last seemingly forever and always seal and hold excellently. Far better then any lever style I've tried.
Joe
2025-04-23 15:15:51
These ate made in the USA and work faultlessly, great product and super quick Amazon delivery
GPL
2025-03-21 11:18:41
Airs up my tires on my jeep with a nice tight fit.
Philip Lee
2025-02-09 12:12:10
Easy to lock on, don’t need to keep pushing it onto valve to stop leaking. I have 4 to inflate and deflate simultaneously, and they do not leak air, if not connected to tyre, ie can use 1-4 tyres to check or add/decrease pressure.
Richard Tremblay
2025-02-04 12:40:19
This air chuck is awesome does what it sais doesn’t leak at all and extremely accurate
Recommended Products
