Your cart is empty.
Your cart is empty.Product Description
Product Introduction
Our Hanchen 0.1mg Analytical Balance offers high accuracy and repeatability for essential weighing applications in laboratory, industrial, pharmacy, jewelry store, and education settings at an economical pri-ce point.
8 Unit Conversions
8 Unit Conversions: (g) grams, (kg) kilograms, (ct) carats, (lb) pounds, (gr) grains, (oz) ounces, (ozt) ounces troy, (dwt) pennyweight.
- Average response time: ≤3P
- Power Supply: AC 110-240V
- Working temperature: +15℃- +35℃A
Feature-Packed, Bench-top Friendly
Small 12in x 8in footprint, combined with a spacious weighing chamber, offers utmost usability in a space saving design.(Height: 12in
- Precision: 0.1mg; 0.0001g
- Calibration: Manual
- Pan Diameter: 3.54"(90mm)
- Readability:±0.1mg
- Repeatability:±0.1mg
- Linearity:±0.2mg
- Dimensions: 8*12*12in(L*W*H)
- Weight: 8lbs
Comparison with Other Balance
Comment from Our Customers
One of our customers said “This scale holds a really good zero, comes out high repetibility readings and does not float around like other lab scales in this category, helping you pass the strict qualification process.”
Comparison with Other Balance
Working Environment
Before use, please find a location free of drafts, vibrations, static electricity, and temperature shifts, to get an accurate reading.
How to correctly calibrate?
Please set up the scale on a flat surface, and adjust the two front leg heights and center the bubble gauge. Leave it in place to acclimatize for 1 hr. then attempt to balance. Please do not touch the certified weight at any time (even to remove it from its case). Do not touch the balance or you should wear nitrile gloves during the calibration. Have all reading with the windshield closed and wait between steps for the balance to stabilize. Once done verify and repeat then verify.
Comment from Our Customers
Most of our customers said "Surprised by repeatability of balance considering the cost, this balance performs as well as some of the more costly analytical balances that I have used previously."
Intricate data processing and expensive printer for balance has always been a pain for some of our customers, according to their suggestions, we add USB and RS232 connectivity on our balance and also develop a matching PC software to assist you to handle the data.
Safiri Regalado
August 10, 2025
Resultó ser mejor de lo que esperaba
N Henderson
July 14, 2025
Readings are very stable when left unloaded (it stayed at a reading of 0.0000 g all week.) If a load is left on it (like the calibration weight), it tends to drift by about 4 mg over a few hours, then stabilize.My impression of its construction is good, with a well designed and built enclosure, base, and pan. The glass cover plates slide easily. A $500+ scale might not sound 'cheap' to most people, but for an analytical scale, you're getting a lot for the money!
Alexis
April 7, 2025
This scale did a great job for my applications. Simple and easy to calibrate and use. The only downside that doesn’t give it 5 stars was the sliding doors. The scale is very sensitive to air flow and the doors didn’t seem to keep it sealed enough.
Yerevan state university
March 11, 2025
Excellent scales !
Andrea Molas Encina
January 28, 2025
what kind of printer we can used with this balance?? im interested to buybut need to know that please
Customer
January 27, 2025
- it is very accurate for analytical and compounding use and the reading is very stable even when used inside a a running Hood. I took out one star because of the included calibration weight which has issues as follow :- the included calibration weight is not certified and looked kind of shady. when I calibrated against a certified weight 200gm, it did show a difference, so use your own calibration weight. the company should not have used a cheap one for a 0.1mg balance.the 2nd issue is that calibration is fixed to 200gm. you can not change it. on a 0.1mg high accuracy balance you should use a smaller weight. I purchased a 1gm certified weight just to discover that I can not use it to calibrate. but as a good surprise, it measured it very accurately (0.9999gm to 1.0000 gm with repeated attempts) after a calibrated the balance using my certified 200gm Wieght. so the balance is still very good value for the money, just purchase your own calibration weight.Also reviews you need to know how to correctly calibrate. you need to leave it in place to acclimatize for 2-3 hours , balance the base, leave it on for 1 hr. then attempt to balance. you should not touch the certified weight at any time (even to remove it from its case). do not touch the balance or you should wear nitrile gloves during the calibration. you should have all reading with the windshield closed and wait between steps for the balance to stabilize. once done verify and repeat then verify.
Recommended Products