Your cart is empty.
Your cart is empty.Product Description
- Made of bronze, with good load capacity. Corrosion and wear resistance, can be used for a long time.
- Self-lubricating bushings can effectively reduce equipment friction, vibration, and noise to improve the performance of mechanical equipment. Design of flange structure with shoulder cover can prevent falling off, easy to use.
- Used in various industrial equipment such as electrical equipment, household equipment, printing presses and machine tools, etc.
- The bushing should be pressed in with a flat head tool to ensure that the sleeve bearing can be evenly stressed.
Mike Flumerfelt
August 23, 2025
I used these bushings to replace cheesy plastic fairlead roller bushings on a UTV winch. The measurements advertised were spot on and the individual bushings were all precisely manufactured. The material used is substantial and again as advertised, first appearances are that I will get years of service from these bushings with little maintenance.
Joe Marshall
August 13, 2025
Sizing was close enough for what I was using them for. Not a load bearing piece so I can't speak to the durability of these. Edges were mostly smooth, although I did have to deburr the outer edge slightly. But they are inexpensive!
Walter
August 10, 2025
Works super for use as a spacer bushing on a small bench grinder/polishing machine with 10mm arbor.
R. Harris
July 14, 2025
the original nylon/plastic bushing will wear out and then the door will no longer align with the switch inside.The 5mm x 9mm x 6mm bearing seems to be a perfect fit and should be more durable than the original plastic one
Chris Scarbrough
June 29, 2025
All aspects of this transaction met or exceeded all expectations
Customer
May 18, 2025
This bushing was destroyed after 15 minutes of light duty use. Clearly not bronze.The previous (real bronze) bushings lasted 10 years in the same application.
Dan
May 8, 2025
What junk, bronze is a softer metal and should NOT crack and be so brittle NOT recommended
Morice Trudel
March 6, 2025
Way better than the cheap plastic bushings I had. i used them to fix a seized shifter mechanism and they did the job perfectly
Jo1018
February 23, 2025
Good
GMC truck guy
January 24, 2025
I have used two of these and they are not good the size is not what it says mine were smaller then 12 mm inside so I had to file them to make it work and one has already broke inside the wheel bearing already I would not buy these for anything that needs to be used in a wheel with a bearing, I drilled out the axle hole and installed a bigger bolt for the wheel on the other side. These are not good for what they cost.
Graham J.
December 25, 2024
This fitting failed the first time it was installed. Disappointing!
Recommended Products