The media could not be loaded.

The media could not be loaded.

If you’re thinking about adding some window decoration and enhancing your privacy then you can’t go wrong with this film. The final result looks great!Stuff you’ll need:Craft cutting matMetal straight edge that’s a meter or yard long.A sharpie marker, fine.X-acto knifeA razer craft cutter is also handy for straight cuts. Helpful but not necessary.Single sided razer scraperWindow squeegee for cleaning (optional but helpful)Window film squeegee (CARTINTS 4Inch Plastic Squeegee...)https://www.amazon.com/dp/B07K554B5V?ref=ppx_pop_mob_ap_shareSmall measuring tape. Milwaukee makes a decent small measuring tape that’s not too expensive. It comes in handy more than you think.Spray bottle for windexSpray bottle for soap solutionBaby shampoo to make a soap solution. A clear dish soap will work I’m told but I haven’t tried it.You’ll need to prepare a table to cut the film to size so if you have one of those craft mats, a straight edge, and a razor cutter you will get the best results. Yes, you can use shears/fabric scissors but your edge won’t be as straight.Measure exactly, write it down, mark the film on the side with the release sheet, cut.It sounds easy but it’s harder than it looks at first.Application: get out the windex, a squeegee, microfiber towels, also a single sided razer scraper is a must. Spray on the windex and scrape all the dirt and film and other nastyness off your window. Might want to consider rolling up an old towel at the base of the window frame and one on the floor. It’ll save you cleanup time later, trust me.Order a window film installation squeegee with a felt edge, it’s worth it and they’re cheap at $4 or so. It’ll make applying the film a breeze. Actually I don’t know how you’d install it otherwise. Order one with your film.Some of these window films on sale have installation videos in the photos gallery. It is worth the time to view them or check on YouTube under installing window film at home.Prepare a solution of baby shampoo and water in a spray bottle. You don’t need a lot of shampoo, just a squirt will do for a standard spray bottle.Once your window is clean, peel off the backing plastic on your window film and spray your soap solution liberally on the film side that’s going on the window AND the window. If you think it’s too much it’s probably just enough. The film needs to be able to “float” on the solution in order to place it correctly. I started by placing it in the top left corner and aligning the left side of my sheet.Use the film squeegee to squeeze the water off the film using the felt side. A microfiber towel comes in handy here.Once you get to the other side of the film, you’re going to want to use the hard plastic side of your film squeegee to press the film into the sides of the window. Use the plastic edge and an X-acto knife to trim the film to the window. I tried using a straight single edge razer which resulted in torn film. Trust me, use an x-acto knife with the plastic squeegee as a guide. I got great results with this combo.Once the film has dried you can give it a quick cleaning with windex for best results.The results were spectacular! Really beautiful pattern like a stained glass window, UV protection (all films reduce UV to some degree), and having some kind of window film is better than none for safety concerns (although this isn’t security film.)This is a great product and I’d definitely buy it again. Excellent quality, not so easy installation but do-able for someone who’s crafty and has patience. Don’t rush, you’ll be fine.

引越し先の目隠しで貼りました。女性1人でも水だけで簡単に貼れるので便利です！

光は取り込みつつ、家の中の様子を隠せるようになりました、満足

I installed the film in our bathroom and it was relatively easy to install and very forgiving for not having absolute straight lines when cutting to required size.All I did was: 1. cleaned my windows thoroughly; 2. sprayed water onto window and film via a small spray bottle from the dollar store; 3. applied film from top of window to bottom and used a cloth to smooth out film; 4. To get rid of air bubbles that formed under the film, I used a spatula and softly pushed out any air bubbles, I did not own a squeegee as suggested in the instructions.PROS:-Easy to install.-Easy to cut with regular scissors-Can easily maneuver to desired position once applied to window.-Prism design reflects rainbows even at night.-The film does provide privacy while allowing natural light into your space.- The film is forgiving to moisture from showers and baths (I was worried about this based on the film adhering via water).CONS:- Had issues with bottom of film fully adhering to window (you can see in bottom window the curled bottom of the film). I'll update once I trial and error a few more things to see if I can fix this.- The film does have a strong chemical smell upon application, though the smell dissipates over several days.

１階.２階貼り付けました。フィルムのサイズ裁断に少し時間が掛かりましたが、貼り付け作業は簡単でした。フィルムに捲れ発生した場合。霧吹きをしてハケで押さえながらドライヤーで温風を掛け伸ばすと綺麗に貼り付け完了致しました。部屋の雰囲気が変わりました。良かったと思います。購入して正解でした。

This product looks great in our new home. Lets lots of natural light in while giving some privacy. We trimmed down the top edge along the stone pattern as we thought the straight edge didn't look as good. A couple of notes on install. 1) Measure your window and take 3/16" off for your cut (24" window, cut film at 23-13/16") instead of following the instructions. You won't notice it on the edges, it makes install WAY easier, no cutting after. 2) Spray the outside of the film once it is against the window, prior to using your squeegee to get rid of air bubbles. Makes it work a lot better. Also, we put one piece up and decided it went too high. Easy to peel off and make changes, which is nice.All in all very happy with the product, we'll see how it holds up over time.