Your cart is empty.
Your cart is empty.
Specifications:
Product Name: 1/24 brass wheel weight block
Color: Gold
Material: Brass
Quantity: 4Pcs/Set
Tyre Weight: 0.073 lb/1pcs
Package List:
4 x brass wheel weight block
1 x screw kit
Customer
2025-09-05 10:19:27
These brass portal weights fit over the actual outer portal cover very nicely and add a good amount of weight down low to the fcx24 Dodge Power Wagon rtr. Fit and finish is perfect for the fcx24. I would recommend this item to anyone else that wants weight but on rotational mass. This won't wear out the motor from trying to turn the weights. As it is fixed to the outer portal cover by four longer screws. So the weight is very low down and helps with keeping the truck on it's tires and adding to the traction. Also should be very helpful for side hilling actions and crawling around rocks.
William Hurd
2025-09-01 20:53:15
The FCX24 definitely needs added weight, and these accomplish that really well, but they do so at the expense of ground clearance next to the wheels. Also, you'll need to add spacers or get longer hex nuts because if you don't, they screw tightly to the wheel and it won't rotate.
zack malinowski
2025-08-29 16:58:38
They rub the tires My fcx24 k5. Going to need additional parts to make them fit
Alex Madl
2025-08-11 09:57:59
I had no issues with these. I have 1.2 in aftermarket wheels, a 6mm hub extension, and the longer axels. Think you'll need those to fit them.
KYLE C ARONSON
2025-08-09 13:22:51
These are a great value, but if your wheels do not have a negative offset, they will probably rub. This caused some problems for me, and I needed to get hex extensions.They will also reduce your ground clearance quit a bit.
ZJL
2025-07-28 15:38:38
Great weight and fit holes line up and adds the needed weight to the axles.
adam
2025-07-18 10:03:01
Well made product, adds lots of weight, but only fits stock wheels. Tried it with some beadlocks and the offset of the wheels causes the screws to come in contact with the back of the wheel, and won't let the wheel turn. Going to try and countersink the screw heads a little more to see if they will clear.
Bisquik
2025-07-16 12:58:11
The brass hub covers are machines well, but the design is lacking. The head screw diameter does not fit inside the counterbore hole on brass covers. Very small but important requirement for the assembly to actually work.
Customer
2025-07-12 12:36:49
These brass portal weights fit over the actual outer portal cover very nicely and add a good amount of weight down low to the fcx24 Dodge Power Wagon rtr. Fit and finish is perfect for the fcx24. I would recommend this item to anyone else that wants weight but on rotational mass. This won't wear out the motor from trying to turn the weights. As it is fixed to the outer portal cover by four longer screws. So the weight is very low down and helps with keeping the truck on it's tires and adding to the traction. Also should be very helpful for side hilling actions and crawling around rocks.
William Hurd
2025-07-10 16:08:44
The FCX24 definitely needs added weight, and these accomplish that really well, but they do so at the expense of ground clearance next to the wheels. Also, you'll need to add spacers or get longer hex nuts because if you don't, they screw tightly to the wheel and it won't rotate.
zack malinowski
2025-07-06 12:28:15
They rub the tires My fcx24 k5. Going to need additional parts to make them fit
Alex Madl
2025-05-04 19:34:49
I had no issues with these. I have 1.2 in aftermarket wheels, a 6mm hub extension, and the longer axels. Think you'll need those to fit them.
KYLE C ARONSON
2025-04-19 14:51:52
These are a great value, but if your wheels do not have a negative offset, they will probably rub. This caused some problems for me, and I needed to get hex extensions.They will also reduce your ground clearance quit a bit.
ZJL
2025-03-18 11:01:15
Great weight and fit holes line up and adds the needed weight to the axles.
adam
2025-02-20 14:25:56
Well made product, adds lots of weight, but only fits stock wheels. Tried it with some beadlocks and the offset of the wheels causes the screws to come in contact with the back of the wheel, and won't let the wheel turn. Going to try and countersink the screw heads a little more to see if they will clear.
Bisquik
2025-02-19 15:14:24
The brass hub covers are machines well, but the design is lacking. The head screw diameter does not fit inside the counterbore hole on brass covers. Very small but important requirement for the assembly to actually work.
Recommended Products
