Your cart is empty.
Your cart is empty.Articus Opithicus
2025-07-21 19:20:26
Ignore the reviews that refer to half of the bulbs not working. These people clearly didn't read the directions (and have no fundamental knowledge of electrical polarity). The Amazon listing AND the directions on the pack CLEARLY state you should reverse any nonfunctional diodes.My pack contained 12 bulbs (11 for dash + 1 extra) and all 12 worked flawlessly. I installed them all, then plugged the cluster in. Only 4 illuminated. The white harness on the left (which feeds power to the lights) is long enough that I was able to spin it out the drivers door and reverse the non-illuminated bulbs polarities while the board was still hot to confirm they work as soon as the connection was made. Easy as pie. The whole thing took a grand total of maybe 20 minutes including disassembly and reassembly of the dash.Definitely buy this pack. I can't believe I allowed myself to drive around for years with a half burnt out, dim cluster. These new ones make the truck look 10 years younger. Much brighter, but still dimmable, it's the perfect solution. I got the white LEDs and just like the listing says, they have a slight blue tint to them as they shine through the gauges, but it looks really, really nice.
DarkFury
2025-06-12 18:30:32
These LEDs really do brighten up the instrument panel. I bought the white LEDs and they shine through a 2004 Dodge Ram 1500 SLT as blue (since there is a blue tint on the panel overlay). Taking apart the dash was the scary part... however installing the bulbs wasn't overly difficult. I wish I knew how to light this panel up for a bench test without having to plug it back in to the vehicle to see which bulbs didn't light up. However, I plugged it in, took a picture with my phone to see which bulbs didn't light up and reversed those bulbs 180 degrees to get them to turn on. Definitely made a visual difference in the display... very bright. Total install took me about 2 1/2 hours just because I was being super careful taking the dash apart to get to the panel (vehicle repairs like this are not something I do often). Overall I'm impressed by the product.
Luca Truex
2025-06-05 12:14:15
Very nice lights that actually fit for my 2003 Dodge Ram 1500 ST, they function well and were easy to replace my old dead ones
Moody
2025-05-23 18:45:25
Ok, so I got these for my 2006 Dodge Ram 1500. I watched a couple videos on YouTube and it was pretty straight forward. Actually getting the cluster panel out was much easier then it looked!So on to review of these LED's. I got the Ice Blue and in the day light the look really good. I can not wait to see them in the dark this evening. The reason for the 4 stars is because these are NOT dimable. On the page it says these are dimable! I freaked out when I installed them and the would come on then immediately turn off. Turned out I had the dimmer switch all the way to low. I turned everything off, turned the dimmer all the way up to brightest setting and they work fine. I tried to slowly dim them and they just shut off. So they have to stay at the brightest setting at all times! I am totally fine with this especially because they look so good!!!Also as you have probably read... there is nothing to tell you with is - or + so just take you time, and do a 180 on any that don't light up!
Robert H.
2025-05-01 09:35:41
Installed the cool white lights and the new aqua blue color on the display is eye popping. Was pleasantly surprised at the custom look these led lights added to my 16 year old Dodge Ram 1500. Like the photos that are posted, which inspired my choice, again all I can say is WORTH The Money And Effort.On the installation, there are videos on the internet that make this task fairly easy, but keep in mind that the led replacement bulbs are polarity sensitive. With that said, once you reconnect the instrument display, check and make sure that all the lights are working. Rotate the lights 180* on the ones that are not. That should correct any lights that weren’t on. The installation uses 12 lights and the kit came with 13, so now I have any extra light just in case.Price wise they are a bit pricey, but you get what you pay for in my opinion. If you are wanting to do this and are a bit intimidated, all I can say is Just Do It! Watch the installation videos or have a friend do it for you.If I have ANY issues in the near future, I will revisit my review and let y’all know.
erik
2025-04-27 16:16:37
I've purchased these twice. First set lasted almost 3 years then all but 2 burned out. I gave them a 2nd chance. While installing I could tell the quality was significantly worse. The 1st set the positive side was marked with a logo. The second set had the the same marking however more than half of them were incorrectly marked. The second set is only 8 months old and 2 bulbs have already failed.
Steve
2025-02-15 18:27:04
Easy to install once you remove the cluster; which wasn't so easy, but not horribly bad. These will fit in socket either direction, but are directional. Since these are led power and common are polarized. What I did was usea multi meter and traced both sides of socket holder on PCB back to wire harness connector and taped 2 stripped wires on to a 9v battery and then stripped the other ends and put them in those pins on harness connector and if it didn't light up I removed the lamp and rotated it 180° and put it back in.Since these are a white light the color of your display does change from Green to a Blue. It does this because there is a blue film on the back of the display and the original lamps were incandescent which is about 3k on the color scale (soft white, yellowish) and since yellow and blue make green that's why your oem color was green. Not sure if you went with a green color lamp if it would be closer to the oem color. Hope you found this helpful.
MPAPEN
2025-02-12 10:00:41
Looks great and fresh style. Must do trial and error for correct bulb orientation to get lights to work. Rotate 180 to get correct polarity. Took several installs and removal of cluster to test lights. I was also shorted one led bulb and had to leave one old bulb in.
Stuff In His Shoes
2025-02-02 12:00:15
These lights work great. One thing to note, as others have mentioned, is there is a positive and negative. What I did was put them all in, and then plugged the cluster back into the trucks power (the left most plug in my case). The lights should come on, but depending on how lucky you were with your placement, some may be off. Don’t worry just rotate the bulb that is off 180° and it should come on. Some people suggested that the white ink on the bulb should match the factory bulbs manufacturer stamp, but I found mine did not work that way. It was just a bit of trial and error.
Recommended Products
