Your cart is empty.
Your cart is empty.HHIP 100 x 33 x 52mm triple vee V-Block Set. All sides hardened, precision ground, parallel and square. V grooves are ground, central, parallel and square. Perfect alignment in matched pair. Supplied in a matched pair. Every angle is 90 degrees. Capacity is 8-60mm.
John Estelle
2025-06-20 13:35:53
I used these to bent a 1 1/2 inch aluminum rod in my press. There solid also used to mill a flat on some rod. So far so good.
nobler
2025-06-08 17:07:34
I needed some small V-blocks for holding some 0.5" connector barrels. These worked quite well for that job.That said, they have zero finish on the blocks, ie, no bluing, no passivation. Nothing. They come packed in grease, which you must remove to use them. At this point, they will start to rust, even in the low-humidity environment of my workplace. So, after use, I packed them in a zip-loc bag with TriFlow oil (the best oil and it stops rust, available on Amazon) until I get some free time to clean them off thoroughly and do a quickie blue-job (see Birchwood Casey "Super Blue" available on Amazon).
mtk nj
2025-05-26 17:22:01
Supposed to be a matched pair but there was only 1 block in the box. Returned....This is the replacement for the first one that had only 1 blockDO NOT BUY!
aamutis
2025-05-12 16:45:50
It's good quality. Very good. it is recommended.
Kassim Tufail
2024-11-18 16:19:18
Very well built perfect for small projects highly recommended
Recommended Products
