Your cart is empty.
Your cart is empty.Sidemount divers, technical divers, and free divers, this product is for you! Highland Weight Plates are a quick and easy way to add blocks of lead to a 2 in (50mm) wide piece of webbing such as a harness or weight belt. This will allow for fine tuning of your weight requirement without having to do any disassembly.
David
2025-09-07 11:14:27
Work great! They lock onto the webbing wherever you put them and don’t move
Caleb McElhaney
2025-09-05 14:49:20
When I’m diving sidemount LP85 and adding an AL40 deco cylinder I need a bit of trim weight. On my XDeep Stealth harness it’s easy to just add 2-4# as I need in the crotch strap rather than more weight in the spine pockets. Very functional design.
Steele
2025-08-04 17:25:08
Bought two sets for a Diverite xt, Probably will buy another set and remove the weight pockets on my hips & tanks
David Gibson
2025-07-09 15:11:40
Works great for extra weight on bcd
patron
2025-07-04 14:34:56
What should take seconds to install, took hours. The nylon-wrapped multiple rubber strands comprising the tie is microns thinner than the hole through which tie must pass through to the other side to tie off. The set of 4 ties (2 ties per plate) are factory heat-sealed at the ends to prevent raveling, but make the tie too thick to pass through the hole, so one has to trim the tie, and immediately the rubber winding expands and the nylon wrapping becomes undone. A pair of needle-nose pliers and ice pick to push the ends did not work. What did the trick was passing through the unraveled nylon threads through first, then wiggling the rubber strands of the elastic rope through. What a DRAG.
Marte Serrano
2025-03-27 11:12:03
Great product! Thanks!!
Christopher Poteet
2025-01-30 18:46:33
This is simple and does the job, but this should come assembled. It doesn't because it the burnt ends on the Bungie are larger than the corner holes. You have to twist them in or remove the melted stub; I shouldn't have to modify your product to assemble it for you out of the packaging.
Walter Kolcz
2024-11-18 18:55:45
Originally heard about these to add extra trim weights to sidemount BCDs so I bought a couple sets. Was a little confused since I didn't see anywhere in the description that it was a pair so I ended up with a second set. My fault but they didn't go to waste. Super easy to set up and attach to your BC and makes weight balancing super flexible. HIGHLY recommend having a set.
Recommended Products
![Cressi Quick-Release Elastic Belt with Metal Buckle, Black, One Size [Duplicate]](images/loading.gif)
$42.95
$ 22 .99 $22.99