Your cart is empty.
Your cart is empty.Product Description
Concrete Sleeve Anchors' design allows them to anchor into concrete, brick and block. Turning the nut pulls the working end of the sleeve anchor up through the sleeve, expanding and anchoring itself securely in the base material. Sleeve anchors have many uses including, but not limited to frame installations, electrical and mechanical attachments, and masonry applications.
From the Manufacturer
Concrete Sleeve Anchors' design allows them to anchor into concrete, brick and block. Turning the nut pulls the working end of the sleeve anchor up through the sleeve, expanding and anchoring itself securely in the concrete, brick or block.
michael andrew fisher
2025-07-05 16:41:18
Thought I was getting small boat anchors and brought them kayaking to anchor my boat... aaaaaand floated right on down river. NOT a boat anchor !
Rob -/\~ Collister
2025-06-10 13:40:50
these are just like red head sleeved anchors, but at a much more reasonable price. made from quality materials. i trust these so much i hung a $1200 ptz camera with them at work. i would recommend these to anyone looking for a solid way to mount things into concrete.
Cajunlady22
2025-03-11 18:49:33
I attached a 2x6 to a concrete wall and a 2x6 and garage hardware to concrete wall. Some of the screws worked great and I think will never move again. Some stripped out. One that was holding the garage door stripped out and sent me to the hospital. Not a product I plan on depending on again.
TexasDeano
2025-02-21 09:32:00
I love these things. I need to mound a water hose reel to the side of my brick house. I drilled the holes using my impact drill and used these to mount the reel. The cinched up nice and tight.
SOHO Denver
2025-02-14 18:04:54
Very good. Arrived quickly, and just as advertised. These have stronger bolts than the Red Head equivalents, which snap off if you tighten them just a little too far.
MJ
2025-01-30 11:08:04
Purchased to hang water hose mount for brick wall. No instructions. First set pulled out. Tried again and got about 2 months use before pulled out again. Gave up and went with different anchor.I would not use for anything heavy even though the load was well within the specs provided. Maybe not useful for brick.
Family in MA
2025-01-28 18:23:08
Two washers and three nuts missing. Otherwise great anchors for cinder block.
CDavidN
2025-01-27 12:09:54
DO NOT BUY. VERY CHEAP. I bought this anchor to put in concrete filled cinder blocks. I drilled the 5/16 inch hole and put the anchor in and when tightening the anchor in place the bolt snapped before I could even get three threads clear of the nut. It was less than 20 ft lbs of torque. I was surprised so I put one of the bolts in a set of vice grips and used a torque wrench and it snapped around 150 INCH pounds (just over 144 inch pounds or 12 ft lbs).
Janitha J
2025-01-26 11:22:47
Cheap product, metal prone to breaking. Does not anchor into concrete . Will easily detach with little internal grip.
Recommended Products
$39.99
$ 20 .99 $20.99