Your cart is empty.
Your cart is empty.Durable, smooth surface for wire hardening and other metal stamping projects. Dimensions: 4" x 4" x 1/2" All surfaces are hardened, smoothly polished, and ground flat Made of solid steel for resistance to dents and scratches
Jane Smith
September 3, 2025
Very straightforward product. Works great for shaping metals. It fits on any small surface so a great addition to a work area. Totally worth the money because this will last you forever if you take care of it. It’s a little more of a quarter inch thick.
JOHN L BENDELE
August 22, 2025
nice steel
Rick Burrington
August 12, 2025
Delivered on time, item as described, packaged good
Ruth
August 10, 2025
Im so excited its here! I can’t wait to use it!
Little Hawk (Darla)
August 6, 2025
This is great, 3/4 of an inch thick, stainless steel and very sturdy.
james hosack
July 6, 2025
Great price for what I need it for. So far it's able to withstand what I'm throwing at it.
Travis F.
July 5, 2025
It's not hardened (below 40 HRC) but it's square, even, and flat on top and bottom (cut a little rough but flat on the sides). For anything softer than mild steel it should be fine. WD-40 should prevent rust if necessary, it may be stainless (201?) but it will rust in damp conditions.
Customer
July 2, 2025
Perfect for hammering metal or hard objects. 4x4 was just the right size for my usage.
Marc
June 29, 2025
juste quelques petits défauts sur un côté et un coin (que j’ai limé).. il va très bien avec ma clef "Putikeeg" pour pratiquer le code morse.. il est suffisamment lourd et avec des petits pads en caoutchoucs, il ne bouge pas du tout..
Darcy McIvor
June 20, 2025
Exactly as described…small but works….I put a 1/4 inch pad underneath to reduce noise
Alex Ledezma
June 14, 2025
Mejor de lo que pensaba, el acabado muy bueno y el peso es el necesario
Davesgonefishin
June 5, 2025
It's a metal slab. So does what it's made for.
GREG
June 2, 2025
Cumple su funcion.
Jane Smith
May 25, 2025
Very straightforward product. Works great for shaping metals. It fits on any small surface so a great addition to a work area. Totally worth the money because this will last you forever if you take care of it. It’s a little more of a quarter inch thick.
JOHN L BENDELE
May 5, 2025
nice steel
Rick Burrington
April 29, 2025
Delivered on time, item as described, packaged good
Ruth
April 4, 2025
Im so excited its here! I can’t wait to use it!
Little Hawk (Darla)
March 14, 2025
This is great, 3/4 of an inch thick, stainless steel and very sturdy.
james hosack
March 10, 2025
Great price for what I need it for. So far it's able to withstand what I'm throwing at it.
Travis F.
March 9, 2025
It's not hardened (below 40 HRC) but it's square, even, and flat on top and bottom (cut a little rough but flat on the sides). For anything softer than mild steel it should be fine. WD-40 should prevent rust if necessary, it may be stainless (201?) but it will rust in damp conditions.
Customer
February 27, 2025
Perfect for hammering metal or hard objects. 4x4 was just the right size for my usage.
Marc
February 4, 2025
juste quelques petits défauts sur un côté et un coin (que j’ai limé).. il va très bien avec ma clef "Putikeeg" pour pratiquer le code morse.. il est suffisamment lourd et avec des petits pads en caoutchoucs, il ne bouge pas du tout..
Darcy McIvor
January 28, 2025
Exactly as described…small but works….I put a 1/4 inch pad underneath to reduce noise
Alex Ledezma
January 22, 2025
Mejor de lo que pensaba, el acabado muy bueno y el peso es el necesario
Davesgonefishin
January 16, 2025
It's a metal slab. So does what it's made for.
GREG
December 26, 2024
Cumple su funcion.
Recommended Products
