Your cart is empty.
Your cart is empty. Are you looking for a storage solution to keep your bike and cargo car rack safe? Do you find these racks awkwardly propped up against the wall in your garage leaving space cluttered and also with the risk of them falling and breaking? Introducing the ULTICOR hitch wall mount storage rack that is a functional piece of equipment to install in your garage to keep your hitch-mounted car racks safe.
ULTICOR BIKE RACK TRAILER HITCH WALL MOUNT STORAGE ORGANIZER
- Made from solid powder coated steel that is rust proof, corrosion resistant, and extreme durable this hitch wall mount can bear a load of upto 200lbs.
- With flared 1.25” and 2” receiver options, this hitch mount has been built for easy loading and will securely fit class 1, 2, 3 and 4 racks.
- We use only heavy duty hardware that is proven to last for long, and our hitch wall mount can be secured to the wall stud using 4 screws.
- This pack includes all installation hardware for your convenience and you can setup this wall mounted hitch receiver in a matter of no time.
- You can give this wall mount hitch as a present to all those adventure enthusiast as it will make a practical and incredibly useful gift to them.
WE OFFER A 100% CUSTOMER SATISFACTION GUARANTEE ON YOUR EVERY PURCHASE WITH US!
All our products are manufactured from durable & high grade materials in facilities adhering to strict compliance and stringent quality standards.
So, Don’t think twice! ORDER NOW, and keep your garage clutter free with our wall mount hitch adapter!
Happy Wine drinker
September 5, 2025
A little snug for the bike rack but it fit great. Very sturdy and it is holding an electric bike rack easily
Jason Burandt
August 31, 2025
The opening is twisted and will not fit any type of receiver. Had another one sent out and it was the same problem. Others have mentioned this problem. Was very excited to get the item. Would have been a great way to get the rack off the floor when not in use. Drilled the holes in the wall as directed. Went to place the rack in the mount and it did not work? Fought with it for a while until I removed it off the wall. Checked the mount on the floor with bike rack... The mount was too tight! No way it was ever going to fit and slid in or out. Poor construction of the item. Should have read the reviews before I ordered the item.
Brian F
August 25, 2025
Searching for a way to declutter my garage while keeping my bike rack easily accessible led me to the Hitch Mount Bike Rack Storage, and it's been a game-changer for my garage organization. This rack is designed specifically for storing bike racks, freeing up valuable floor space and keeping my garage tidy and functional.The installation of the Hitch Mount Bike Rack Storage was a breeze. Its straightforward design and simple mounting process meant I had it up and ready to go in no time, with minimal effort required. Plus, its durable construction ensures that my bike rack stays securely in place, even when not in use.What sets this storage solution apart is its efficiency. By utilizing the vertical space in my garage, I can store my bike rack neatly out of the way, without sacrificing accessibility. Now, instead of tripping over my bike rack every time I enter the garage, I can simply grab it and go whenever I need it.In summary, if you're looking for a space-saving solution to store your bike rack in the garage, look no further than the Hitch Mount Bike Rack Storage. Its easy installation, durable construction, and efficient design make it a must-have for anyone looking to declutter and organize their garage space.
JG
August 9, 2025
THE GOOD:It's very well made. Solid welded steel construction. The flaired opening helps facillitate hitch insertion. Includes hefty lag bolts with hex heads (but no washers) for wall mounting. Also came with plastic anchors for concrete walls.THE NOT SO GOOD:The bracket is vertical, but the receiver seems off (twisted) so the bike rack does not hang flat and parallel to the ground. This may be cosmetic, but it bugs me.All in all, a very good product. Gets a heavy and bulky rack up off the floor and out of the way.Finally, it did not include any instructions. Do you drill small pilot holes to avoid risk of splitting the wall studs or not? The lag bolts look 1/4". In the end, fearing risk of splitting wall studs, I did drill small pilot holes. How much would it cost ($0.01) to include a small instruction sheet?
Will
July 19, 2025
My bike rack was cluttering up the garage and I was worried about it falling over and hurting one of the kids. This seemed like a good solution to get it safely stored up and out of the way where it couldn’t get knocked over.The build quality is better than I expected for the price. Usually the screws supplied with low cost equipment just need to be thrown away, but these are good quality. The paintwork is good and I had no concerns about it taking the weight of the rack.Installing was straightforward. Find a stud. Use the mount as a template to mark the screw locations. Drill pilot holes. Screw the mount to the stud.I did find using the mount a little less easy than it could have been. The ends are flared to help insertion, but it also makes it a little tricky to line them up as all the sides flare out A pin comes with the kit, but it’s not attached to the mount so you have to leave it close by, insert your accessory and then leave it unsecured while you grab the pin to lock it in place. I find this a little unnerving. I’ll probably figure a way to tie it on or attach a hanger for the pin next to the mount. It would have made things easier and safer is this came as standard though.Despite this it’s still a straight 5 from me. Much better than having stuff on the floor leaning against the wall.
JohnnyTea
June 29, 2025
Worked so simply. Only modification was that in order to get the hitch mount in the right place in a tight spot I added a 2x12 screwed to the studs and then put the mount on the 2x12 between the studs. I'm no metal expert, but this mount seems plenty substantial to handle my heavy three bike rack. It hasn't budged since installing it a few months ago. There has been no problem sliding the rack in and out. The screws that came with it worked fine, but I'd never try to use a phillips on them, rather use an impact driver or a socket wrench. It's an excellent out-of-the-way solution instead of having the rack just lean against the wall and wonder when it would slip. And FYI - some have asked if this needs to be mounted on a stud (or similar). My opinion is that it absolutely does. I cannot imagine any kind of wall board being strong enough to manage the stress.
Jalil
June 17, 2025
Bought for bike rack, did not fit 2" waste of money and time.
Dennis Harnack
May 31, 2025
This worked great, easy to install and keeps my rack off the garage floor when not on the car. This one worked great as all the install holes were in one line and I was able to get the 4 lag bolts provided into a stud. This made it very stable. I noticed some racks came with holes in a wide pattern and you would not have been able to get every lag bolt in a stud. They may work okay if you had a nice wide wood base but for a regular drywall, standard wood framed wall this was perfect.
hgl
May 30, 2025
Installed a few weeks ago. Holds rack nicely.
Javier Solorzano
May 19, 2025
Están mal las medidas, mide 2" exactamente por lo cual no tiene espacio para insertar un rack
John Mitchell De Leon
March 29, 2025
Tried using this product with a Yakima Full Swing bike rack and did not fit! 2 inch receiver should be standard. Some reviews say it worked well for them, but in my case it didn't.
Sean
December 27, 2024
My 1Up bike rack (2") won't fit into the receiver, way too tight. This is a very standardized thing so not sure how the product can be so off... Will be returning for a refund.
Recommended Products
$189.95
$ 88 .99 $88.99